other compressed air technology used for sale

Used centrifugal blower from Reitz Umwelttechnik – 22 kW, 400 V, 50 Hz - Manufacturer: Reitz Umwelttechnik - Type: MSE 056-009530-00 - Power: 22 kW - Voltage: 400 V, 50 Hz - Volume flow: 95-100 m³/min - Pressure boost: 534-560 daPa - Speed: 2925-2940 rpm (max. 3100 rpm) - Suction temperature: up to 80 °C - Density: 1.205 kg/m³ - Shaft power: 11.5-16.4 kW - Condition: Used, functional. Includes spare engine. - Other blowers with 7.5 kW and 22 kW power available on request.

ACT activated carbon adsorbers should always be equipped with Kaeser filters. Installed as pre-filters and post-filters, they ensure the maximum service life of the activated carbon and keep carbon dust out of the cleaned compressed air – with very little pressure loss. Generous filling quantities of high-quality activated carbon and their permanently low pressure loss make them particularly economical. This means that they can withstand up to 12,000 compressor operating hours without changing activated carbon. A standard oil indicator indicates possible malfunctions. Residual oil contents in the concentration range 0 – 0.01 mg/m³ Volume flow 1.60 – 155.50 m³/min Maximum operating pressure 10 bar / 16 bar and as an option also 45 bar

BOGE CC Distributor - 6-fold - 579005800P 2 pcs. available á Euro 500,- + VAT

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2 Wall bracket

modular compressed air maintenance unit PARKER Maintenance unit with filter, pressure regulator, stopcock Filter with pressure regulator P3KEA14ESABNGP Stopcock P3KVA14LN Oiler can be filled under pressure P3KLA14LSMN Inlet pressure up to 17 bar Control pressure 8 bar Connection 1/2 Wall bracket

Powerful vacuum cleaner for dust, smoke, chips Suction power 7.58 m³ / min Vacuum 520 mbar Air requirement 3.25 m³ / min Suction nozzle NW 76 mm Suction hose 5.5 m Collection tank 60 litres HEPA Safety Filter Cartridge 2.2m² - Dust Class H Space requirement L - 1,100 x W - 680 x H - 2,200 mm Weight approx. 130 kg

Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, mint condition -30% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Differential pressure gauge, A2G-15, -50/0/50Pa, Wika, - Output 4-20mA - Max. Pressure 20kPa 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court ...

PROD. Aerzen TYPE GM50L YEAR 2015 POWER (kW) 89.90 CAPACITY (m3/min) 55.16 PRESSURE (bar) 1

PROD. Aerzen TYPE GM90 S YEAR 2008 POWER (kW) 93.80 CAPACITY (m3/min) 59.80 PRESSURE (bar) 1

We offer Kaeser compressed air system consisting of 2x adsorption dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter, compressed air management system Sigma, oil-water separation system & control cabinet The compressed air system was used to supply compressed air to a production hall. It was built or extended from 1995-2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the use of the hall. The screw adapter is sold. 1. Screw compressor Kaeser CS 121 75 kW 2, 2x Adsorption Dryer Kaeser DC 75 E Bj. 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Bj 1995 704 kg 4.Piping with ultrafilter SG 0192, 5,Control system: SIGMA Air Manager Basic 6.Oil-water separation system Kaeser 7.Control cabinet standard Rittal PS 4884 Technical data on the components To 1 photo 1-2 Screw compr ...

To generate pressure and vacuum For more details, see Operating instructions in the appendix Little used, like new

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

Centrifugal fan REITZ MXE 125-016030-00 Type GR 90° direct drive 45 kW m³/min 160 mm WS 1250 Intake ø 350 mm, outlet ø 275 Workshop tested, very good condition

SPECIFICATIONS: Air flow rate L/min: 1500 Pressure bar: 16

Inv. Num. : 6931 Type: ULTRTERM HA U-HA 120 Producer: Aeroterm Created: 2001 Parameters: In good technical condition.

Air-operated airless pump on pump trolley The T2001 piston pumps are robustly designed air-driven airless pumps designed for pumping, decanting and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE or PE.  An ATEX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for uniform material flow during conveying and spraying - Versatile use due to stainless steel, carbide, PTFE or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning due to self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval E ...

SCA drum squeezer with air-driven piston pump. Ideal for 200 ltr. Barrels, low and high viscosity products.

A large valve terminal from Festo is offered here. It consists of the following parts: - VABE-S6-10L-C-M1 (543414) - VABF-S5-10-P1A6-G12 (676822) - 3 x VABV-S4-1S-G14-2T2 (668449) - 2 x VABV-S4-2S-G18-2T2 (668434) - VABE-S6-1R-G12 (677887) - 6 x VSVA-B-B52-ZD-A1-1T2L-SA (SA235697B) with sockets - 6 x VABF-S4-1-R1C2-C-6 (540152) with pressure gauge. But it still works without any problems) - 3 x VSVA-B-B52-ZD-A2-1T2L-SA (SA235697D) - VABB-S4-2-WT (539213) In addition, 4 large silencers and various push-in fittings. Of course, the connecting cable has to be re-laid in the VABE-S6-10L-C-M1.

We offer Kaeser compressed air system consisting Schraubenkompressor.SC 1211, dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter SG 0192, Sigma compressed air management system, Kaeser oil-water separation system and control cabinet The compressed air system is used to supply compressed air to a production hall. It was built or extended from 1995 - 2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the hall use. The system must be serviced and inspected before it can be put back into operation. The system consists of the following components: 1. Screw compressor Kaeser CS 121 75 kW-12 bar built in 1995 & separate air intake duct from outside and inside with flap control 2, Adsorption dryer 1 Kaeser DC 75 E YOC 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Year 1995 704 kg 4 ...

Sandblasting cabin unfinished Project VAT not deductible Please inquire with location and postcode Dimensions to follow