PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in
2005, is used in the process of processing thermoplastics by injection
moulding. The characteristic feature of the machine is a two-plate
hydraulic mould closing system with attached closing cylinders,
working with a force of 25 tons. The machine’s screw with 22 mm in
diameter rotates at a speed from 10 to 370 rpm and is driven directly
by a hydraulic motor.
The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows
for high automation of the injection process with setting and control
of the injection parameters from the control panel located on the body
of the machine. The injection moulding machine is offered with a wide
range of equipment, including a plastic feeder and a MITSUBISHI E600
HMI panel. Total weight of the machine is 1470 kg.
Characteristics of PONAR ŻYWIEC UT-025 H injection moulding
machine
- maximum clamping force: 25 t (250 kN)
- maximum mould opening force: 4.5 t (45 kN)
- maximum stroke of mould opening: 300 mm
- minimum mould height: 175 mm
- mould clamping plate size (L x W): 475 x 475 mm
- maximum clearance between plates: 475 mm
- clearance between columns: 300 x 300 mm
- hydraulic ejector force: 16.5 kN
- stroke of hydraulic ejector: 80 mm
- injection volume: 30 cm3
- maximum injection weight: 27,3 g
- maximum injection capacity: 37 g/s
- maximum injection pressure: 214 Mpa
- screw diameter: 22 mm
- screw pitch: 80 mm
- screw speed range: 10 – 370 rpm
- maximum torque of screw: 200 Nm
- pressure force of injection nozzle: 60 kN
- stroke of injection nozzle: 180 mm
- heating power: 3,7 kW
- number of heating zones: 3 + nozzle
- hydraulic pump drive power: 5.5 kW
- installed power: 9.2 kW
- oil tank capacity: 80 dm3
- pressure of hydraulic system: 18 Mpa
- machine dimensions (L x W x H): 2.5 x 1 x 1.75 m
- total weight: 1470 kg
Injection moulding machine equipment
- PLC control: MITSUBISHI FX2N-48MT-ESS/UL
- HMI Panel: MITSUBISHI E600
- plastic feeder
- pads (4 pcs.)
- air valves (2 pcs.)
- DTR – technical and operation documentation of the machine
Poland
