used Residual concrete recycling plant for sale

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Strand granulator type: ASG-4-63 without feed The GRANULATOR ASG 4-63 is only suitable for the cutting/granulating of semi-hard thermoplastics and is used in the regranulation /recycling of plastics on/on an extrusion line Up to 4 pieces of individual plastic strands with the Ø of 4 mm can be fed to the cutting rotor via a separate feeding unit, usually strip or roller puller. The part/granulate length is proportional to the feeding speed and can be adjusted by changing the rotor speed. Speed rotor max. 380 min-1 Ø Feed strands max. 4mm Cutting force : ~410 N EL connector: 400VDC 16A

Plastics Recycling Extruder PP=900-1000kg Complete Line

AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The shredder has a hydraulically driven slider equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. Year of construction 2007 Propulsion: 9.2 kW Hydraulic pusher: 1.5 kW Weight approx. 850 kg

AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg

FRESH FRUIT TREATMENT AND JUICE EXTRACTION LINE 1 WASHER INOXALL 5B 2 WATER RECYCLING GROUP 3 SORTING LINE SELINOX 5B roller type 4 ELEVATOR 5 SHELLING GROUP MEGRA 8 6 MONOSCREW PUMP WITH HOPPER 7 TANK 10.000 L (optional) 8 MONOSCREW PUMP WITH INVERTER 9 MEMBRANE PRESS 10 VIBROSCREENER (optional) 11 BRL 300 L. 12 CENTRIFUGAL PUMP 13 PLATFORM FOR PRESS ELECTRIC BOARD 1 ELECTRONIC BOARD WASTE ELIMINATION SYSTEM 1 SET OF SCREW CONVEYOR

BFS SOUVERAEN Complete Concrete Pipe Plant DN 300 - DN 3600. Plant is from 2003. and is in very good condition The complete plant onsist of two production lines. DN 300 mm - DN 1200 mm, fully automatic Packerhead technology, and one double station semi automated for pipes up to 3600 mm and box culverts. Vibration technology. The package includes: 2 Steel cage machines, 5 Fork lifts, Tilter for box culverts, 2 Robotic handlers, overhead crane and a complete batching plant. The plant can be seen after appointment. The plant was shut down in 2018.. (Video clip is available) Amexpo Consult, Merkurvej 31, 9370 Hals Denmark Mobile: +45 29251017.

Fully automatic production line for concrete pipes DN300 up to DN1200 based on RADIAL PRESS or PACKERHEAD Technology. BFS-Souveraen Type: 1230 Condition: Very good The SOUVERAEN is the BFS pipe machine for high-performance production with first-class product quality. The counter-rotating pressing tool takes over the concrete compaction and is controlled by a sophisticated control system. The feeding of the concrete will be torque controlled, instead of concrete weight in standard systems. So the compaction quality is always secured. Production of concrete pipes according to all international standards. Year of construction: 2003, but has few hours, since it has worked very little since 2018 Location: Italy Condition: is in very good shape and well maintained. The machine is based on the packerhead technology (radial press) from BFS. The automatic handling is an open flo ...

Fully automatic pipe system and shaft ring system with cage welding system Manufacturer: BFS Fully automatic concrete pipe and manhole production line including cage-making machine Manufacturer: BFS

1 used residual concrete recycling plant BIBKO ConTec, year of construction 1992, without control, spare parts available, rep. needy, sale ex location Upper Franconia

Fresh concrete recycling plant BIBKO RAM 20/ used manufactory: Bibko type: RAM 20 YOM: 2001 Capacity: ca. 12 m³/h system washing trough, trough length 2500 mm separating layer 0,25 mm with discharge conveyor screw (new) overhauled/reconditioned and exactly aligned - gear reconditioned (overhauled) and sealed - all bearings are new - buckets and scraper exactly aligned - 1 pcs feed hopper / used - 1 pcs agitator (wastewater) with console / used - 1 pcs control unit / used -for the full automatic control of the complete plant - 1 pcs gallows-shaped pipe/ used Facility is fully equipped, clean and primed. The final painting according to customer's request. location: South Germany available: immediate offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasi ...

Resonance screening machine, Screening machine, Vibrating screen, Linear screening machine used Manufacturer: Binder + Co AG TYPE: SL1000GX.6.7 Year of construction: 1999 Sieve: 2 levels each approx. 4.2 x 0.9 m Upper level: Longitudinal grid with approx. 13 mm distance Lower level: plastic screen with approx. 9 x 9 mm mesh size Insertion height approx. 1.5 m Dimensions without drive approx. 6800 x 1700 x 1800 mm Resonance screens are used in the dry and wet screening of round and edge grain as well as leafy materials. They work according to the throwing principle. This machine was used in a glass recycling plant. Changes and errors in the technical data, information and prices as well as prior sale reserved.

Coating line for concrete slabs and pavements Including: Spray unit, drying and UV system Coating system for concrete slabs and paving Consistin of: Spraying unit, drying and UV system

DEGLAZIER WINDOW+DOOR Waste glass recycling Manufacturer: BMT Braunschweig Year of manufacture 1996 Measurements of jobs Work: Length approx. 5800 mm Width approx. 2450 mm Height approx. 3000 mm Transport: Length 5800 mm Width 2450 mm Height 2100 mm Weight 2650 kg Location Lower Saxony

NEW! BARTONTECH BOTTLE RECYCLER – THE FUTURE OF RECYCLING Discover a modern and eco-friendly solution that revolutionizes the collection of PET bottles and aluminum cans. The Bartontech Bottle Recycler is an innovative device with a built-in compaction function, ensuring higher efficiency, convenience, and cost-effective recycling. MAIN BENEFITS 15 times higher efficiency compared to standard solutions. Impressive capacity – holds between 6,000 and 12,000 bottles and cans, depending on the model. Lower operating costs – less frequent emptying required. Reduced storage space needs – no need for major store adjustments. Lower logistics costs – compactor creates 200-300 kg bales ready for resale. Freestanding design – ideal for outdoor use. Customization options – tailored design and functionality to meet client needs. TECHNICAL SPECIFICATIONS Dimens ...

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

Used alligator scissors in good condition - Blade length 406 mm - Electric motor 400 V, 4.0 kW - Knife opening max. 250 mm - Cutting capacity up to max 50 mm round bar The scissors have been checked and repaired by us We supply a second, unused knife set for the scissors The machine is immediately available and can be viewed and tested at our premises. More information at infoRecyclinganlagen.info

Small floor filter, which can be used, for example, for extracted air from separators in cable recycling. The filter is without its own fan, so it works purely passively. The filter and the collection bags have a diameter of 500 mm.

Strong alligator scissors with longer blades - ideal for radiators and trays. The Deltax DTX 4/600 not only has longer blades than its little brother, but also a higher cylinder force. The hold-down device can be securely locked at different heights and does not slip upwards during operation. The scissors are also available in the CAT version with an additional push-on aid. Specifications: Blade length: 610 mm Max. opening width of the blades: 318 mm Cutting pressure of the knife: 110 tons Drive: 7.5 kW, 400 V Cutting speed, max: 60 per minute For more information, see infoRecyclinganlagen.info

Universally applicable alligator shears for almost all areas of application in scrap metal operations. Fast, powerful and robust. Specifications: Knife caps: 406 mm Cutting cylinder force: 106 tons Cutting speed, max: 60 cuts/minute Weight, approx: 1,000 kg Operated by foot pedal Single cut or endurance run Further information: infoRecyclinganlagen.info

Heavy alligator scissors with maximum cutting power. The Deltax DTX 600 offers the unique hydraulic hold-down device that lowers parallel to the lower knife. This keeps the round material and material shaft secure. Nothing slips out to the front. This means that several bars or profiles can be processed safely in one go. Specifications: Blade length: 610 mm Cutting force: 172 or 210 tons cylinder pressure Opening width: 330 mm Drive: 11.0 kW, 400 V More information at infoRecyclinganlagen.info

Small dosing accumulator with screw conveyor for cable recycling plants, wood chips, etc. Capacity approx. 650 litres or 400 - 500 kg of pre-shredded old cable Adjustable conveying speed with frequency converter/inverter 0 - 16 rpm Drive only 0.55 kW with reduction gear Discharge height approx. 750 mm Dimensions (LxWxH): 2,200 mm x 800 mm x 1,800 mm Mobile via large heavy-duty castors with brakes

Used vibrating vibrating screen with two sieve inserts for three fractions. The sieve was used for the post-cleaning of plastic granules from cable recycling. The lower deck has an additional perforated plate with anti-clogging cleaning balls. The screen comes with inserts of 0.8 mm, 1.3 mm and 2.3 mm.

Simple unit for transporting plastic granules, such as PVC from cable recycling. Suction through hopper and 100 mm flex tube. Forwarding by fan/fan in rotary valve for dust removal. By extending the pipes, the unit can also be located further away from the feeding point. The big bags are suspended by height-adjustable chain hooks. The unit consisting of a rotary valve and filter is also adjustable in height. Of course, boxes can also be used instead of big bags. The machine can be inspected and tested with us.

Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.

Used, heavy and high-performance recycling plant for the recycling of old cables. The machine has a granulator with a knife length of 500 mm and a large cutting table. As a result, the Sincro 530 from Guidetti achieves hourly outputs of 450 to 600 kg (manufacturer's specs). The system was traded-in by us and all essential components were checked in the workshop. The machine works reliably and trouble-free. On request, the system can be equipped with pre-shredders and conveyor belts. Feel free to visit us and get your own impression of the machine. You are also welcome to test the machine with your cable material.

Overhauled hydraulic shears with new blades, seals, etc. With strong 0 t cutting cylinder. Perfect for demolition or recycling or as cable cutters in cable recycling. The shears can be operated via an electric or gasoline-powered hydraulic pump. The scissors are the reinforced industrial version and not a lighter rescue scissors. The scissors can be viewed and tested at our premises.

Young used machine with very few hours of operation. Compact cable recycling plant with low connected load for 80 - 120 kg/hour (depending on material) This system can be operated with a pre-shredder via a conveyor belt as well as in direct insertion. The system still has the original, unground set of knives, so it can hardly have more than 40 to 50 operating hours. Therefore, we offer this system including a 12-month used machine warranty. Pre-shredders, conveyor belts, dosing accumulators, etc. can also be obtained from us.

Cable recycling plant with many innovations in all plant components for up to 600 kg/hour (depending on material) The basis of this recycling plant is modularly constructed from strong and innovative individual components. In the standard version, the following structure is obtained. - Preshredder MR 4080 or MR 40-100 - Conveyor belt with magnetic separator - controlled by PLC - Granulator C 600 with axle length 600 mm, 5 rotor blades and 37 kW drive, cooling of the housing by unit against adhesions - Z-separator for the separation of heavy copper or 1 granulate - Dosing drum for the optimally uniform feeding of the following turbine mill - Ghibli 545 turbine mill (new model), optionally with coolable housing and inverter control - SA 600 separation table, new version with PLC inverter control of the air volume + eccentric drive with inverter control of the oscillation + adju ...

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and pa ...

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Heavy conveyor belt for the recycling of old cables or other materials. The 30 cm strap is designed with concealed lateral pleated bars so that no wires or other material can get stuck in the gaps. The 0.75 kW drive motor is also equipped with a reduction gear, which significantly reduces the conveying speed. The conveyor belt is only used a little and therefore shows hardly any signs of wear.

Used conveyor belt, built in 2020, few operating hours Very heavy design for recycling With very strong neodymium magnet in the upper deflection drum Reducing gear for slow conveying speed With concealed wavy edge and crossbars on the harness Large inlet hopper with adjustable slider for material height on the belt 4 m long, discharge height approx. 2.2 m (variable) Ideal, for example, for feeding material into a cable recycling plant At call

Large Four Shaft Shredder with Two Cutting Shafts and Two Feed Shafts. Until now, the shredder has been used as a pre-shredder for the recycling of old cables. Due to the hydraulic tamper, the shredder can also be used for bulky materials. Changing the screens is hydraulically assisted and therefore easy to do. On request, the shredder can also be supplied with the articulated conveyor belt shown here. The conveyor belt is equipped with a magnet in the upper pulley for iron separation.

It is a unit for cutting open catalysts and removing the ceramics. It comes from a lease return and is unused. The hydraulic shear has the extension for opening the interfaces compressed interface. There is also a hydraulic hold-down device for holding other materials, such as profiles or sheet metal. The connection for a dust extraction system is also available on the Catmate. The scissors come from the manufacturer JMC/Mc Intyre, the operation is via a foot pedal as a single cut or in continuous operation. Blade length : 508 mm Knife opening: 255 mm at the tip Cutting cylinder: 120 tons Dimensions, ( L x W x H ) approx. : 1.7 x 0.9 x 15 mm Weight: 1150 kg Drive: 7.5 kw / 400 V The unit is available for immediate delivery and can be viewed, tested and picked up from us in Weimar. For more information, see infoRecyclinganlagen.info

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

The JMC 407 is the top seller among our alligator claws. It is cost-effective, has sufficient knife length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, piping, motors, gearbox housings. The scissors are also often used for cleaning scrap metals or cutting vehicle radiators. The machine is equipped with a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. By means of a foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted by means of simple clamping screws. The scissors are from our demonstration pool and can be viewed or tested.

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

Compact but extremely versatile cable recycling plant. The pelletizing plant has both a Z-classifier (Zigzag) for the separation of 1 mm heavy copper and a turbine mill for processing fine cables and data conductors. The system was only fed and used by hand with selected cables. The condition is correspondingly good. Specifications: Suitability: Cables, cut to length without impurities Throughput capacity max. 150 kg/hour Connected load: 19 kW Dimensions (LxWxH): 1.4 m x 0.7 m x 2.3 m Weight: 1,200 kg Further information: infoRecyclinganlagen.info

Used cable recycling plant Tecnoecology T 250 Turbo Year of construction: 2008 The plant consists of the following parts: - Pre-shredder: Bano MAC 630, approx. 250 - 400 kg/hour, depending on material - Conveyor belt to the dosing accumulator, approx. 4.0 m - Dosing accumulator with discharge conveyor, approx. 1.5 m³ - Controlled conveyor belt with belt magnet for feeding the granulator, approx. 4.0 m - Granulator GA 400/30, approx. 250 - 400 kg/hour, depending on material - Turbine mill, T 25-2, built in 2019 - Separator TV 300, inverter controlled, separation table 80 μm - Dust extraction and filter system The entire system currently achieves between 200 and 300 kg/hour in operation, depending on the cable composition. On request, additional components, such as a big bag loading for the plastic or the re-screening of the granules, can be supplied. The plant is curre ...

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient knife length and enough power for most tasks in metal recycling. It is suitable for cutting many materials, such as profiles, pipelines, motors, transmission housings. The scissors are also frequently used for cleaning scrap metals or for cutting vehicle coolers. The machine has a control without electronics and a manually adjustable holder, which also acts as a protective hood. The scissors can be used by foot pedal in single or continuous operation. The opening width is adjustment via simple clamping screws.

Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission.  ...

Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters

A used non-refurbished screen changer for an extrusion recycling brand BRITAS. The machine is located in a production plant. Power unknown, probably 300 - 600 kg/h, electrics 240/400 volts, 50 hearts, available at short notice. Auch + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

BTS-Bottle Crusher The BTS-Glass Crusher is ideal for crushing glass bottles in the beverage, glass industry and gastronomy. The volume of up to 100 beer bottles, wine and champagne bottles also other one way glass bottles can be crushed user-friendly up to 90% per minute. The glass bottle crusher impresses with its easy operation, throughput and large filling volume. - Volume reduction up to 80% - Reduces frequency of waste collection - Useable for beer, wine, champagne bottles and other one way glass bottles - Small foot print - Safe and easy to operate - Clean and safe work environment - CE-certified - Quality product Made in Europe Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 1850 x 965 x 832 mm Transportation height: 1850 mm Machine weight: 315 kg Noise level: 65 decible Volume reduction up to: 80%