Sartorius Stedim biotech BioWelder 16370
The BioWelder works with a thermal welding cycle that does not require
laminar flow.
In this welding process, the blade is kept sterile and endotoxin-free
throughout the process.
The inserted hoses are cut with a knife and then fused together by the
device.
The cycle process is fully automated and is only released after a full
cycle.
Various programmable holders make it possible to weld thermoplastic
hoses of the same type (e.g. C-Flex, Sanipure, Pharmed) with diameters
from 6.4 mm (1/4) to 19.0 mm (3/4).
Characteristics:
Fully automatic operation
Welds thermoplastic tubes up to 3/4 inch outer diameter
Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure,
AdvantaFlex, Pharmed and Sanipure hoses
True Thermal Weld offers exceptional strength
Aseptic connection without laminar flow hood
Data output by a printer
Compact design, portable
Easy to validate, with validation equipment
Can weld many different tube diameters
includes: Tube holder
SH1 5/8 15.9 mm outer diameter inserts (1 set)
Manufacturer specifications:
Housing: Stainless steel
Interface: RS232 for printers
Blade: Cr-Ni alloy, single use
Ambient temperature 20°C–30°C (ideal: 22°C)
Relative humidity: 20%–80% (ideal: 60%)
Temperature sensor: Type K, calibration
pipe OD: 3/4
Minimum. Pipe OD: 1/4
Welding cycle: 60–90 sec. depending on pipe dimension
More Biowelder - new and used - can be found in our shop!
International shipping costs on request!
Germany
46325 Borken 
