TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY
CNC milling machine 1530 6kW - INDUSTRY version
✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY
with a 150x300cm working table equipped with an ultra-efficient 6kW
electrospindle on a full ceramic bearing. The height of the Z axis is
300mm.
✅ The machine is protected by protective light barriers that prevent
intrusion into the working area of the machine during operation.
✅ The working table of the machine is made in hybrid technology - it
has vacuum sections and subsections for automatic, non-invasive
clamping of the processed material, as well as T-Groove slots for
manual clamping.
Information:
Manufacturer: TechnologieCNC
Model: 1530 INDUSTRY
Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic
bearing
Max. speed in slow travel: up to 33m/min
Max. working speed in material: up to 25m/min
Software resolution: 0.01mm
Mechanical resolution: 0.04mm
Working surface X/Y/Z: 1500x3000x300mm - Hybrid table
(vacuum+T-Groove)
Control: NK-105 controller
CAD/CAM software:
Standard: AUTODESK Artcam Open (2D Milling) (can import designs from
Corel, AutoCAD)
For an extra charge: UcanCAM V10 (3D machining, NESTING) (can import
projects from Corel, AutoCAD)
Power supply: 3PH, 400V, 50-60Hz
Features:
✅ Hybrid worktable - vacuum with the possibility of manual clamping
with T-Groove clamps
✅ The frame of the machine, made of a high-quality alloy, is welded
in its entirety, then subjected to a stress relieving process in a
special chamber with special conditions, and then milled. This process
ensures that excellent results are achieved in terms of rigidity and
stability of the structure
✅ Machine control with DSP control system NK-105
✅ Automatic tool height sensor
✅ Automatic central control system
✅ The drive system is a high-quality hybrid stepper motor with a
holding torque of 7N·m!
✅ Direct drive transmission on racks by means of planetary
reducer
✅ The machine in all axes (X, Y, Z) runs on high-quality guides and
linear bearings PMI/HIWIN
✅ Wiring the machine with high-end anti-fire wires. The electrical
wires used in the construction of the milling machine are adapted to
bending and are protected against deformation
✅ 860H - 4.2A Stepper Motor Drivers
✅ Z axis on TBI ball screw
✅ Pneumatic positioners that allow the workpiece to be evenly pushed
to the zero point of the machine.
✅ SICK safety light barriers included
Maximum security
✅ As standard, the machine is equipped with professional protective
light barriers of protection class 4.
✅ Light sensors mark the safe zone and prevent intrusion into the
machine's work zone.
✅ A set of barriers as standard with the machine provides protection
for the operator's station on one side.
✅ The number of pages necessary for protection depends on the
location of the machine.
Poland
66-40 Gorzów Wielkopolski 