It is a thermally insulated lightweight hall (built in 2008), whose
hot-dip galvanized supporting structure and sandwich cladding together
with various equipment can be reused.
DIMENSIONS according to construction documents:
Covered area: 375.00 square meters;
Width of the hall: 25.00 m AK wall;
Length of the hall: 15.00 m AK wall;
Frame spacing: 5.00 m MM frame supports;
Eaves height: 5.24 m at the intersection of roof and wall;
Ridge height: 7.30 m building height;
Purlin spacing: 2.50 m floor area / 2.54 m roof pitch;
Wall beam spacing: 2.50 m;
Roof pitch: 10 degrees, symmetrical gable roof;
LOAD ASSUMPTIONS:
Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005).
Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005).
Seismic zone: 3 (DIN 4149-4 April 2005).
STRUCTURE:
The primary structure consists of hot-rolled and hot-dip galvanized
IPE solid profiles. Main frame columns/trusses (IPE 300 of grade S 355
J2 G3) with suspended drawstring (FL 80x20 of grade S 355 J2 G3).
Gable trusses (IPE 300 of grade S 235 J2 G2) and gable supports (IPE
180 of grade S 235 J2 G2). Horizontal beam under gable triangle IPE
240, S 235 JR G2. The secondary structure to accommodate the building
envelope consists of galvanized strip steel, cold-finished hollow
sections of steel grade S 355 JR G3 for purlins PRO 120x60x4 K and S
235 JR G2 for wall beams inside and S 355 J2 G3 in the end panels,
footbeams in the longitudinal wall QRO 60x3 K, S 235 JR G2. The
longitudinal walls are bracing with full portal frames (IPE 240 of
quality S 235 G2 for portal posts/studs and portal beams/beams)
instead of cross beams. Roof bracing made of steel cables (16 mm
diameter DIN 1480 with 1/2 shackles, M20 turnbuckles and eyelets).
FOUNDATION:
Dowel anchoring by means of WÜRTH composite anchors W-VD M16 or
Fischer COMPUFIX FAZII 16/25 anchor bolts made of galvanized steel on
reinforced strip foundations (concrete C 25/30) with edge
reinforcement or on a floor slab at least 20 cm thick with edge and
stirrup reinforcement (concrete C 30/37).
ROOF:
FischerTHERM DL 80 0.55/0.50 sandwich panel d = 120/80 mm, grey-white
on roof purlins made of cold-finished and galvanised lightweight
profiles (RRK 120x60x4 K, S 355 J2 G3).
WALL:
FischerTHERM LL 80 0.55/0.50 sandwich panel d = 80 mm, grey-white on
wall beams made of cold-finished and galvanised lightweight profiles
(PRO 120x60x3 K).
EQUIPMENT:
1 Stk. ISO sectional door with reel chain manual, dimensions: 3000 x
4000 mm;
2 Stk. ISO steel escape door, dimensions: 1100 x 2090 mm;
8 Stk. ISO windows, white PVC frame, dimensions: 2200 x 1500 mm;
1 continuous wall skylight 12000 x 1000 mm in longitudinal wall axis
B;
4 SHEV smoke and heat extractor 1500 x 1800 mm;
DOCUMENTATION: PDF copies of the original construction documents with
static calculations and construction drawings from 2007 - 2008.
LOCATION: Swabian Alb, Baden-Württemberg. Viewing by appointment.
SALES PRICE: on written request with complete company/contact details.
Germany
14129 BERLIN 