Milling machine Aciera F4 Travel XYZ: 400-175-450mm Spindle holder: ISO 30 Spindle speeds: 50-3400. Table size: 900x350mm. · Automatic feed on X and Z axis 10-600mm/min · Rapid traverse on both axes 1500mm/min . Drill quill · With some tools · Cleaned and maintained and now ready to use
Type F3 Longitudinal stroke 300 mm 135 mm cross-stroke Vertical stroke 300 mm Usable table area 600x205 mm Number of Grooves 4 Maximum groove width 10 - 16 mm W20 Cutter Spindle Inner Taper Spindle speed 100 to 2500 rpm Fast approach speed 12 to 232 mm/s Power (KW) 0.6 to 1.5 KW Dimensions 1200x1000x1450 mm Weight 620 Kg
universal milling machine ACIERA F3V Year of construction unknown with accessories
- Digital display Heidenhain - Tapping device Table 580 x 280 mm Speed 40 - 3600 rpm Spindle diameter 65 mm Receptacle Aciera quick-change system Drilling spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg
Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg
High precision drilling and milling machine Aciera 22 VA Good condition from school operations Year of construction approx. 1990 Table 600 x 320 mm Speed 40 - 3600 rpm Speed setting rpm 4 automatic feeds 40-280 80-560 275-1800 550-3600 Spindle diameter 65 mm Drilling spindle stroke 120 mm Spindle holder: Aciera quick-change system Automatic thread cutting Drilling capacity in solid material 25mm Max drilling capacity up to 30mm Height adjustment via hand crank Motor: 1.1 KW Lamp Some quick-change shots Dimension WxDxH 90 x 130 x 185 cm Weight approx. 800 kg Technical information subject to reservation
Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed to the X-axis Manual speed on the X-axis Fraeskop 360° rotating Tilt table li and re rotate 30° Cowlmittel pump With vice With tool holder ER25 with some collets CE marking
Milling machine Aciera F3 Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed on the X-axis Manual gear on the X-axis Feed of the Y-axis can be optionally between threaded spindle or rack and pinion Fraeskop 360° drehbahr Tilting table li and re 30° rotate Engine brake Kuhlmittelpumpe With vise With tool holder with collets CE marking
-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg
-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg
Procedures x way 500 mm y way 320 mm z-way 420 mm table 350 x 900 mm Speed 50-3400 RPM. Recording ISO 40
Speed 45-4000 RPM Fehlmann table 380 x 750 mm X/Y/Z 420/300/500 mm Motor-driven height adjustment of the drilling head
x-travel: 300 mm y-travel: 135 mm z-travel: 300 mm spindle turning speed range: 100-2000 U/min table-size: 590x210 mm weight of the machine ca.: 0.6 t Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 2 bore capacity in steel (diameter): 10 mm bore stroke: 100 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.67 x 0.62 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm x-travel: 400 mm y-travel: 285 mm turning speeds: 45-4000 U/min total power requirement: 3,6 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: LBH 2,0 x 1,4 x 2,1 m - POS+MAT table - ALBRECHT tool quick change system - Vices The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 22 mm throat: 270 mm spindle turning speed - stepless: U/min weight of the machine ca.: 1.1 t dimensions of the machine ca.: 1.2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 28 mm x-travel: 400 mm y-travel: 285 mm turning speeds: 45-4000 U/min total power requirement: 3,6 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: LBH 2,0 x 1,4 x 2,1 m - POS+MAT table - ALBRECHT tool quick change system - Vices The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of spindles: 2 bore capacity in steel (diameter): 10 mm bore stroke: 100 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.67 x 0.62 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data Longitudinal travel (X-axis): 100 mm Transversal travel (y axis): 75 mm Vertical travel (z axis): 150 mm Spindle speeds: number (steps): 6 from: 125 rpm up to: 4000 rpm Taper in spindle:: 12 W Voltage 50 Hz 3x: 380 Volt Motor output: 0.3 HP Machine´s weight about: 120 kg Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1400 mm Various accessories: Dividing attachment Vice: width: 60 mm Steady Set of collets
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 2 - 22 mm Max. drill depth: 120 mm Table length: 500 mm Table width: 400 mm Spindle speeds: stepless from: 50 rpm up to: 4000 rpm Power: 1.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 400 mm Width: 500 mm Height: 1000 mm
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 13 mm Table length: 400 mm Table width: 350 mm Depth of throat: 200 mm Spindle stroke: 120 mm Spindle speeds: number (steps): 10 from: 350 rpm up to: 5000 rpm min.: 30 mm max: 330 mm Voltage 50 Hz 3x: 380 Volt Power: 1.00 HP Machine´s weight about: 260 kg Overall dimensions machine: Length: 800 mm Width: 550 mm Height: 600 mm
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Drill capacity in steel: 6 mm Table length: 310 mm Table width: 280 mm Depth of throat: 150 mm Spindle stroke: 50 mm Spindle speeds: number (steps): 8 from: 650 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Power: 0.30 HP Machine´s weight about: 50 kg Overall dimensions machine: Length: 600 mm Width: 350 mm Height: 650 mm Various accessories: Drill chuck: 0 - 6.5 mm Lamp
Drilling capacity: 0 mm Number of drilling units: 0 Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 3 Drill capacity: 6 mm Drill depth (spindle stroke): 50 mm Table length: 820 mm Table width: 180 mm Taper in spindle Depth of throat: 150 mm Spindle speeds: number (steps): 6 from: 325 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 100 kg Various accessories: Threading attachment: 3 Coolant system Drill chuck: 3
Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Control: GE MARK CENTURY ONE PLUS Technical data number of tools Drill capacity in steel: 23 mm Spindle speeds :steps: 9 from: 42 rpm up to: 3500 rpm Table length: 820 mm Table width: 400 mm Longitudinal travel: 400 mm Transversal travel: 320 mm Vertical travel: 470 mm Feeds: 1000 mm/min Rapid traverse:: 3.5 m/min Voltage 50 Hz 3x: 380 Volt Power: 2.5 kW
Key data: 600 , 190 , 300
Table length: 600 mm Table width: 190 mm Longitudinal X: 300 mm Cross Y: 135 mm Vertical Z: 300 mm Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 1500 rpm Taper in spindle:: 20 W Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 600 kg Various accessories: Vertical milling head
thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 135 mm z-travel: 300 mm spindle turning speed range: 100-2000 U/min table-size: 590x210 mm weight of the machine ca.: 0.6 t Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
