Model
(Manufacturer: FASTI)
with stop plate and 3 sets of rollers Projection:approx. 240 mm Color: Green Roller center distance: 63 mm Pick-up shaft: 25 mm Sheet thickness: 1.25 mm Dimensions:1200 x 800 x 1400 mm Weight: 70 kg Machine number: 7541002 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 2040 mm, 3 mm
with various OW rails segmented tools Foot switch Hand control Colour: grey Total power requirement: 16 A Motor power: 4 kW Upper beam stroke: 350 mm Bending Angle: 135 degrees with motorised bending beam lowering Power: 2040x3.0 mm, 4.0 mm steel, 1.5 mm aluminum Dimensions: 3200 x 1600 x 900 mm Weight: 2460 kg Machine number: 99 295 003 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 1060 mm, 1 mm
with hold-down and cutting angle adjustment Colour: grey Adjustable back gauge approx. 500 mm Weight: 350 kg Dimensions: 2000 x 800 x 1300 mm Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 1040 mm, 4 mm
Max. bending length: 1040 mm Max. sheet thickness: 4 mm steel Bending rail ground Weight: approx. 1200 kg
Specifications: - Max. working width 2040 mm - Max. material thickness 1.5 mm - Bending angle lockable with end stop 0 - 135 ° - Max. stroke upper beam 220 mm - Max. adjustment of bending beam 60 mm - Manual bending process is supported by eccentric weight - Space requirement approx. W 2950 x H 1700 x D 1100 mm - Weight approx. 1800 kg
Max. sheet thickness: 2 mm steel Max. blank diameter: 750 mm Motorized drive via foot switch
Key data: 1040 mm, 4 mm
Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions The rear area is secured by a safety fence with light barriers Knife sharpened Instruction manual available Weight: 1600 kg
Key data: 2 mm
Max. sheet thickness: 2 mm steel Roller center spacing: 100 mm Maximum projection: 400 mm Clockwise and anticlockwise rotation via foot switch Motor with infinitely variable speed adjustment Machine in original paint Accessories on request
Key data: 1030 mm, 2 mm
Max. cutting length: 1030 mm Max. sheet thickness: 2.5 mm steel Manually adjustable back gauge up to 530 mm Cutting angle adjustment Side stop and table extension Knife sharpened Weight approx. 800 kg
FASTI guillotine shears Effective length: 1030mm Maximum sheet thickness: 2.5mm
Key data: 2040 mm, 6 mm
Specifications: Roll length 2040 mm Bending capacity 6 mm at 450 N/mm² Bending capacity approx. 80% of the bending capacity Upper roll diameter 170 mm Rear roll diameter 170 mm Lower roll diameter 165 mm
Key data: 1 mm
Type 412 – 80 / 1,75 . Specifications: Wakzen center distance 80 mm Sheet thickness 1.75 mm at 400 N/mm² Projection 315 mm
Key data: 1020 mm, 2 mm
Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be pre-selected via scale Manual and automatic bending mode possible Weight: approx. 650 kg
Key data: 2040 mm, 2 mm
Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Upper beam adjustment motorized via foot switch Honeysuckle Notes Weight: approx. 1500 kg
Offer 23336 Specifications: - Max. working width 2040 mm - max. material thickness at 40 kg / mm², strength 3 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic sequential control for a complete workflow - Coding switch - Upper beam stroke up + down adjustment - Maximum opening width / stroke of the upper beam 350 mm - Height adjustability - the bending beam 80 mm - the lower beam 80 mm - Upper beam drive 400 V / 1.5 kW - Bending beam drive 400 V / 2.2 kW - with - E.- foot button - Flat rail + pointed rail - Space requirement approx. W 3200 x H 1600 x D 900 mm - Weight approx. 2800 kg
Max. sheet thickness: 1.5 mm steel 2 motor speeds Additional head for the production of the cams on the cam standing seam
Key data: 160 t, 3000 mm, 2550 mm
Max. bending length 3000 mm Max. pressure 160 Ton Distance between side frames 2550 mm Length of stroke 200 mm Control DELEM DA 24 e Equipped with: Motorized back gauge Upper dies Bottom dies Segments Foot contact 2-hand operated Service tools etc.
Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail ground Weight: approx. 1800 kg
Max. bending length: 2040 mm Max. sheet thickness: 1.25 mm steel Clockwise and counterclockwise rotation via foot switch 3-roller drive Safety pull switch Conical rounds possible
Max. bending length 2540 mm Max. plate thickness 2,0 mm Equipped with: Motorized back gauge 2500 mm Segments Service tools etc.
Rebate tensile spinning machine Manufacturer: FASTI Type: 605 Year of construction: 1989 Control: OMRON SYSMAC CPM1 Max. working width: 2040 x 1.25 Working diameter max.: 900 mm (1000 mm with egg-shaped pipe body) Projection: 300-400 mm Roll forming stations: Standard flat rollers Sheet thickness max.: 1.25 MM at 400 N/mm2 Engine kW: 2.25 kW Connection: 400 volts Dimensions LxWxH: 3300 x 700 x 2220 mm (= incl. attached control)
Bending capacity at 45 kg/mm2: 2540 x 2 mm 6 angles pre-adjustable Automatic or manual operation Double foot switch 1 additional edge rail 1 additional bending rail wide
Max. cutting length: 1040 mm Max. sheet thickness: 2.5 mm steel Manual backgauge with hand crank up to 500 mm Side stop and table extensions
Max. bending length: 3040 mm Max. sheet thickness: 4 mm steel Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Lifting height of the upper beam variable Central lubrication Bending rail ground Operating instructions Other bending rails and backgauge on request Weight: approx. 6,000 kg
cutting length: 3040 mm sheet thickness: 4 mm steel Motorized rear gauge with digital display up to 1000 mm Side stop and table lengths Cutting length limitation Cut edge illumination Weight approx. 4500 kg
Motorized three-roll bending machine Fasti 2040x2mm Roller diameter approx. 105mm sheet thickness over the entire length 2mm Foot switch GS identifier Hndxqcbkg Dimensions: LxWxH approx. 3x1x1.2 meters Weight approx. 1300Kg
1500 x 1.5 mm bending capacity (sheet iron 400 N/mm2) with new angle control ELGO (new in 2023) (without hindling)
bending length: 1540 mm sheet thickness: 1.5 mm steel Roller diameter: 80 mm Motorized rear roller lining with automatic switch-off Clockwise and counterclockwise rotation via foot switch 3 roller drive Safety cable pull switch Conical rounding possible
large working width: 3240 mm for sheets up to: 4 mm Opening width upper wall: 350 mm Adjustability bending pliers: approx. 80 mm Bending angle adjustment: up to approx. 180° Top cheek drive: 4.8 kW Unterwangen drive: 7.5 kW electr. Connection: 400 V kW Weight: 6800 kg Space requirement: 4520 x 1400 x 2080 mm
