used ILLIG for sale

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Vacuum forming machine for the production of PS, PVC, PET, blister, tray packaging. The thermoformer works separately forming and punching. The machine is in very good condition and was only used as a back-up machine for 16 years. It has been cleaned and extensively tested. so that it is immediately ready for use. Currently, a tool for trays in the size 125x176 mm is installed (forming tool 3-fold, negative, top), tool size approx. 188x408mm. We are also happy to put you in touch with a very good toolmaker who can produce format tools according to your wishes. Equipment of the machine: Moulding area 350 x 500 mm Film width max. 540 mm Moulded part height max. 100 mm positive - Top heating longitudinal row control - Underheating longitudinal row control - Strip steel cut heating - Forming station pneumatic, undertable as cooling plate - Needle chain transport with servo  ...

ILLIG UA 200 G thermoforming machine was built in 1990 in Germany. This highly efficient machine is used in the production of high-quality plastic parts, such as tubs, containers and car parts. As the ILLIG thermoforming line is equipped with two material feeders, the thermoforming process is fully automatic and also allows machining in sheets or from a roll. Technical data of the ILLIG UA 200 G thermoforming machine - maximum mould dimensions (L x W): 1960 x 980 mm - minimum mould dimensions (L x W): 860 x 720 mm - total heating capacity: 87.2 kW - maximum operating pressure: 10 bar - material feeder (2 pcs.) - power supply: 3x 380 V; 50 Hz

Thermoforming machine Illig RDM-50 K • Year of built 1994 • Suitable for processing PS and PP • Forming area 500 x 280 mm • Max material width 525 mm • 200 mm air cylinder for per-stretcher • Servo driven main engine and material transport Specifications • 7 upper heating zones • 7 lower heating zones • Tool temperature control • Separate down holder cooling • Material sag control Additional equipment • Foil unwinding station • Endless stacking unit Good condition, available immediately

Thermoforming machine Illig UA150U, year of construction 1991, S/N 585, max. power 14.6 kW, with control Schleicher PGS, motor-driven conveyor belt, length approx. 1,500 mm, with lot of tools for thermoforming machine Illig, individual listing is not available, in stock on shelves in the basement and at the thermoforming machine

Three Illig punching machines are available for the precise punching of thermoformed plastic parts from film material. Working width: approx. 900mm, working height: approx. 120mm, roller diameter: approx. 196mm, machine dimensions X/Y/Z: approx. 2500mm/1300mm/1600mm, weight: approx. 750kg. Including two hydraulic punching machines Wolf EHPT 6E and two manual swivel arm punching machines. On-site inspection is possible.

An Illig thermoforming machine is available. Working dimensions X/Y: 500mm/400mm, max. air pressure: 10bar, heating power: 4.5kW, motor power: 1.24kW.

Age 2007, Consisting of :-, Siemens S7 PLC Controls Indramat Servomotor Siemens SINAMICS Motor Drive Rittal Control Cabinet Cooling Unit with Temperature Display With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production, This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line., Effective Working Area: 740 x 340 mm, Max. Part Height: 150 mm, Formed Part Stacking Length: 800 mm

Output: 12000 U/h // Cup Volume (Min): 35 g

// Forming Area (Vxh): 704x515