used RAS for sale

used beading machine with electrical defect, hardware in good condition Description and order available. New price currently EUR approx. 16,000 without warranty I can only estimate operating hours at about 2000

Rok produkcji: 2007 Waga: 20,000 kg Maksymalna długość robocza: 2560 mm Maksymalna grubość blachy (stal miękka): 2.0 mm Maksymalna grubość blachy (stal nierdzewna): 1.5 mm Maksymalna grubość blachy (aluminium): 3.0 mm Dodatkowe wyposażenie: podajnik wykrojów, narzędzia

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg

Max. cutting length: 2540 mm Max. sheet thickness: 3 mm steel Manually adjustable backgauge from the front up to 550 mm Side stop and table extensions Sheet metal hold-up Knife sharpened Weight: approx. 2500 kg

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

sheet width: 2540 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: m Rear stop manually adjustable from the front up to 550 mm Side stop and table extensions Sheet metal holding Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 2,25 mm distance between columns: 2040 mm total power requirement: 7,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,2x1,7x1,1 m SN-No. 380/6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 2040 mm plate thickness: 3,5 mm distance between columns: 2100 mm sheet width: 2040 mm output: 3,7 kw weight of the machine ca.: 2,3 t Baujahr: unbekannt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 4 mm cutting angle: 1,49 ° : 40-80 column arm: 200 mm Number of hold downs: 13 Stück back stop - adjustable: 5-1000 mm table height: 750 mm oil volume: 85 l air pressure - required: 5 bar weight of the machine ca.: 3600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 3 mm total power requirement: 4 kW weight of the machine ca.: 3.300 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2,5 mm Opening width of the upper beam: 200 mm Bending Angle: 0-180 ° engine output: 2,6 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 3150x1200x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mm plate thickness: 2,5 mm distance between columns: 4060 mm stroke: 300 mm total power requirement: 3 kW weight of the machine ca.: 5.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1630 mm plate thickness: 3 mm total power requirement: 2 kW weight of the machine ca.: 1300 kg dimensions of the machine ca.: 2360x1250x1280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6040 mm plate thickness: 2 mm total power requirement: 10 kW weight of the machine ca.: 7.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mm plate thickness: 4 mm Opening width of the upper beam: 400 mm Bending Angle: 0-180 ° total power requirement: 7,5 kW dimensions of the machine ca.: 5000x2200x2560 mm weight of the machine ca.: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting length: 3150 mm plate thickness: 4 mm cutting angle: 1,45 ° no. of strokes: 35-80 Hub/min column arm: 200 mm Number of hold downs: 16 Stück rear stop: 5 - 1000 mm table height: 750 mm total power requirement: 7,5 kW weight: 4.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 4,5 mm Folding length: 2540 mm Depth rear gauge: 1500 mm CNC Brand: _Unknown / Other Make RAS Multibend Type 74 . 25 Year 1987 ras MULTIBEND 8000 schwenkbiege Sheet thickness (mm)T = 4.5 mm Folding length (mm)L = 2.540 mm Depth rear gauge (mm)Depth = 1.500 mm 2 sets off toolling Adj. upper beam = 400 mm Bend angle = 0 - 180 Gr  

Ras Control Operator Panel Multicut - Line 2000

Ras 2100 x 3 mm Max sheetthickness: 3 mm Cuttinglength: 2000 mm