used ROBLAND for sale

Basic Cutting length 3500 mm Cast iron sawing unit type Z5 Max. saw blade (not incl.) 500 mm, max. 350 mm with scoring saw blade Scoring unit 120 x 20 mm Cutting height 90°: 175 mm, 45°: 120 mm 3 speeds: 3000/4000/5000 t/min 8D9Kjux2Mt Cutting width between saw blade and Z4 rip fence 1350 mm Z5 Cross Table (1505x760 mm) with Telescopic with Z5 Mitre Stop with 2 Folding Stops Comfort Pack on Cross Table with Extendable Workpiece Roll Frame table with extendable support and degree grid index system with length compensation Motorized height adjustment and inclined position of the saw blade incl. special accessories: Motor 9.2 kW Start/stop in the sliding table

5-fold combined joinery machine Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, slewing ring, dressing thickness, planing width 300 mm with three-knife shaft, dimensions tables 310 x 1500 mm, passage height 230 mm, circular saw 0-45° swivel, max. cutting height 100 mm, saw table dimensions 350 x 950 mm travel 1200 mm, saw blade diameter. max. 300 mm, tiller with two speeds 3100 / 6200 rpm, milling mandrel 30 mm, height adjustment max. 110 mm, slotted hole drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm

Robland sliding table saw 320cm 5.5KW main motor Undercutter manual up-down and 0-45 angle adjustment 3 rotation speeds The machine is in working order, it still performs its functions well

sliding table saw with carriage Robland 3200 silver line scoring on a separate motor, stroller length 320cm 7KW main motor 3 rotation speeds max discs 450mm Tilt 0-45 electrically adjustable with readout Electrically adjustable up-down saw without reading Culaga on the right side motorized up to 1240mm digital readers on a culaga on a trolley angle tool included Brand machine in very good condition,

Robland edgebander pre-milling cutters Adhesive application pneumatic pre-shear pressure rollers Ready-made cutting balls Up-down milling unit R1 – R2 flat cyclin machine length with plate 250cm feed rate 5.5m/min max. edge thickness 2mm total demand capacity 6.8KW, machine in good condition, Works flawlessly. Possibility to check before purchase

Table milling machine with sliding carriage Spindle diameter 30mm Spindle length 180 mm Engine power 7.5 hp (5.5kW) Table size 2540 x 710mm

Sliding table saw Robland Z400 Scoring unit on a separate motor (0.75KW) Stroller length 320cm Tilt 0-45° manually adjustable Manually adjustable up-down saw Culaga on the right side manually adjustable, max width 1380 mm main motor 7.5KW 3 cutting speeds adjustable on the belt Year of production: 2019 A branded machine, technically fully operational, will still perform its functions well

Carriage length: 3200 mm 5.5 kW motor 3 rotational speeds: 3000, 4000 and 5000 RPM Scorer Rip fence with fine adjustments: 1300 mm Manual blade tilt Blade diameter: 400 mm Raising / Lowering the Manual Blade Cutting height: 125 mm 45° cutting height: 100 mm

Combined 5 operations (Planer, Degau, Router, Saw and Mortiser) Plane: Usable width: 310 mm Usable height: 230 mm Dégau: Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common for the robot and jointer Spinning top: Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45° Cutting height with 250 mm blade: 80 mm Table width 800 mm Parallel fence length: 635 mm Mortiser: Wick mortising (0 to 16 mm)

Combined 5 operations (Planer, Degau, Router, Saw and Mortiser) Plane: Usable width: 310 mm Usable height: 230 mm Dégau: Usable width: 310 mm Table length 1400 mm Shaft diameter 70 mm, common for the robot and jointer Spinning top: Shaft diameter 30 mm, length 125 mm Table width: 800 mm Saw: Blade diameter 250 mm, tiltable at 45° Cutting height with 250 mm blade: 80 mm Table width 800 mm Parallel fence length: 635 mm Mortiser: Wick mortising (0 to 16 mm)

EXHIBITION MACHINE Weight 950 kg Voltage 3 x 400 V Engine power (S6) 9.2 kW / 12 hp Dust extraction connection 160 mm Diameter knife block 120 mm Number of knives 4 Dimensions knife 630 x 30 x 3 mm Max. cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 – 300 mm Dimensions thickness planing table 1160 x 630 mm 8D9Qxjdewy Variable feed speed 5 – 22 m/min. Diameter of feed rollers 70 mm incl. TERSA. Knife shaft Image includes optional accessories

Suction nozzle diameter: 120 mm; Volume flow: 1900 m³/h; Negative pressure: 2500Pa; Scout bag volume: 1 x 1426 m³; Filter cleaning: manual; Motor power: 1.1 kW; Dimensions: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg;

Suction nozzle diameter: 120 mm or 100 mm; Nominal volume flow: 1900 m³/h; Scouting bag volume: 1 x 0.1426m³; Filter cleaning: manual; Motor power: 1.1 kW; Machine height: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg;

Suction nozzle diameter: 150 mm; Volume flow: 3000 m³/h; Negative pressure: 3500Pa; Air speed: 47m/s; Bulking bag volume: 2 x 0.1426m³; Filter area: 5m²; Filter cleaning: manual; Motor power: 1.5 kW; Dimensions: Weight:

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the saw for fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90

Carriage length: 2500 mm; Cutting width at the width stop: 1200 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Carriage length: 2500 mm; Cutting width at the width stop: 900 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel: 30mm; Speed of milling mandrel: 3000 / 6000 / 7500 / 10000 rpm;

Carriage length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3000 mm; Cut depth: 125 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Dowel hole drilling device: no; Drilling depth: 150 mm; Elongated hole length: 180 mm; Height adjustment range: 145 mm; Motor power: 1.5kW; Speed: 3000 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 240 kg; Solid slotted hole drilling machine with 2 lever controls.

Working width: 410 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Display of planing strength: mechanical digital display; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

Working width: 510 mm; Planing shaft: Spiral shaft 88 pieces 15 x 15 x 2.5 mm 37Â; dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planing thickness display: Digital display; Feed speed: 5 / 8 / 10 / 16 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: link pressure bars; Table rollers: no; Motor power: 9.2 kW; Engine brake: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Working width: 510 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2250 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Indication of planing thickness: mechanical counter; Feed speed: 8 / 16 m/min; Feed roller: steel; Pull-out roller: steel; Pressure beams: link pressure bars; Table rollers: Yes; Motor power: 7 kW; Engine brake: yes, automatic; Suction port: 150mm; Machine length: 2200 mm; Machine width: 1050 mm; Weight: 900kg;

Working width: 410 mm; Planing shaft: Tersa; Number of knives: 4; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planing thickness display: Digital display; Feed speed: 6/12 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

Working width: 410 mm; Planing shaft: Tersa knife; Number of knives: 3; dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Indication of planing thickness: mech. Counter; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 325kg;

Working width: 410 mm; Planing shaft: spiral shaft; dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Indication of planing thickness: mech. Counter; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 325kg;

Working width: 310 mm; Planing shaft: Tersa knife; Number of knives: 3; Dressing table length: 1320 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 230 mm; Height adjustment thickness table: handwheel; Indication of planing thickness: mech. Counter; Feed speed: 6 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 3.7 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 1400 mm; Machine width: 750 mm; Weight: 270kg;

Working width: 410 mm; Planing shaft: spiral shaft; dressing table length: 2000 mm; Dressing stop angle adjustable: yes 45Â to 90Â; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Display of planing strength: mechanical digital display; Feed speed: 6 / 12 m/min; Feed roller: steel; Pull-out roller: steel; Table rollers: no; Motor power: 4.5 kW; Engine brake: yes, automatic; Suction port: 120mm; Machine length: 2000 mm; Machine width: 882 mm; Weight: 615kg;

Working width: 410 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2360 mm; Adjustment dressing table: lever; Advertisement for Spahn acceptance: Scala; Display hollow pointed joint: -; Dressing stop angle adjustable: yes; Motor power: 4.4 kW; Machine length: 2360 mm; Machine width: 860mm; Weight: 475 kg;

Working width: 410 mm; Planing shaft: strip knife; Number of knives: 3; dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; Motor power: 4.4 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 295kg;

Working width: 410 mm; Planing shaft: Tersa; Number of knives: 3; dressing table length: 1800 mm; Dressing stop angle adjustable: yes 45Â to 90Â; Motor power: 4.4 kW; Engine brake: yes, automatic; Suction port: 100mm; Machine length: 2000 mm; Machine width: 750 mm; Weight: 295kg;

Working width: 510 mm; Planing shaft: tersa; Number of knives: 4; dressing table length: 2800 mm; Adjustment dressing table: lever; Advertisement for Spahn acceptance: Scala; Display hollow pointed joint: -; Dressing stop angle adjustable: yes; Motor power: 7 kW; Machine length: 2800 mm; Machine width: 1000mm; Weight: 800 kg;

Working width: 510 mm; Planing height: 250 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display Planing Thickness: Digital Display; Feed speed: 8 / 16; Feed roller: steel; Pressure bar: articulated; Pull-out roller: steel; Table rollers: no; Motor power: 7 kW; Suction port: 120mm; Machine length: 800mm; Machine width: 900 mm; Weight: 650kg;

Working width: 410 mm; Planing height: 230 mm; Planing shaft: strip knife; Number of knives: 3; Height adjustment: handwheel; Display planing thickness: Scala; Feed speed: 7 m/min; Feed roller: steel; Pressure beam: -; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Suction port: 100mm; Machine length: 800mm; Machine width: 700 mm; Weight: 205kg;

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric with table positioning; Display Planing Thickness: Digital Display; Feed speed: infinitely variable 5 - 22 m/min; Feed roller: steel jointed; Pressure bar: articulated; Pull-out roller: rubber 2 x; Table rollers: Yes; Motor power: 9.2 kW; Suction port: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 1000kg;

Working width: 630 mm; Planing height: 300 mm; Planing shaft: Tersa; Number of knives: 4; Height adjustment: electric; Display Planing Thickness: Digital Display; Feed speed: infinitely variable 5 - 22 m/min; Feed roller: steel; Pressure bar: articulated; Pull-out roller: rubber 2 x; Table rollers: no; Motor power: 9.2 kW; Suction port: 160mm; Machine length: 1200mm; Machine width: 1200 mm; Weight: 1000kg;

Working width: 410 mm; Planing height: 230 mm; Planing shaft: Tersa; Number of knives: 3; Height adjustment: handwheel; Display planing thickness: Scala; Feed speed: 7 m/min; Feed roller: steel; Pressure beam: -; Pull-out roller: steel; Table rollers: no; Motor power: 4.4 kW; Suction port: 100mm; Machine length: 800mm; Machine width: 700 mm; Weight: 205kg;

Y-axis drilling: 920 mm; Y-axis saws: 860 mm; X axis: 3000 mm; Z axis: 12 mm - 40 mm; A axis: 360 Â; min. dimensions plate: (X) 300 mm x (Y) 120 mm x (Z) 12 mm; Feed speed: 20 m/min; Drill: 5mm/20mm/35mm; Milling tool: 8 mm; Groove saw: 90 mm x 3.5 mm; Maximum groove depth with saw blade: 10 mm; min. hole diameter: 3 mm; max. hole diameter: 35 mm; Motor power: 1.3 kW; Weight: 500 kg; CNC drilling machine with 4-position drill chuck and saw bladeThe saw runs over the X-axisCentral lubrication stationOperation via

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: mech. Counter; Swivel angle indicator: -; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Spindle swivel: Yes 0 to 45Â; Height adjustment: electric/position control; Swivel adjustment: electric / position control; Milling fence adjustment: electric / position control; Milling jaw adjustment: manual / handwheel; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Aigner integral stop: yes; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm;

Spindle swivel: Yes 0 to 45Â; Height adjustment: handwheel / electric; Swivel adjustment: handwheel / electric; Milling jaw adjustment: manual; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Carriage length: 3200 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 170 mm; Vorritzer: yes; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm; Machine width:

Carriage length: 3200 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 140 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 5.5 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm;

Cutting length: 2500 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 2550 mm; Cut depth: 125 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: electric; Display Saw Blade Angle: Digital; Display Cutting Height: Digital; Display Width Stop: Digital; Display cutting ruler: Digital; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm;

Carriage length: 3200 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 125 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Display Saw Blade Angle: Digital; Display Cutting Height: Digital; Display Width Stop: Digital; Display cutting ruler: Digital; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm;

Carriage length: 3200 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 170 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm;

Carriage length: 3200 mm; Cutting width at the width stop: 1350 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 125 mm; Vorritzer: yes; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm; Machine width:

Carriage length: 3200 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 200 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 550mm; Saw blade diameter completely retractable: 500mm; Motor power: 9 kW; Engine brake: yes / automatic; Suction port: 100mm and 120mm; Machine length: 3400mm;

Cutting length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at the cut-to-length fence: 1565 mm (telescopic extension up to 2550 mm); Cut depth: 170 mm; Scorer: no; Height adjustment saw blade: handwheel; Swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 500mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 9.2 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm;

Cutting height at 90Â: 125 mm; Cutting height at 45Â: 80mm; Cutting length at 20mm cutting height: 545 mm; Cutting length at 125mm cutting height: 450mm; Horizontal mitre range: 0 - 45Â; Miter range vertical: -45Â to +45Â; Roller conveyor / support table: no; Saw blade diameter: 400 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 60mm; Table size: 1540mm x 1025mm; Machine length: Machine width: Weight: 180kg;

Carriage length: 3200 mm; Cutting width at the width stop: 1250 mm; Cutting width at cut-to-length fence: 3200 mm; Cut depth: 125 mm; Vorritzer: yes; Height adjustment saw blade: electric; Swivel adjustment saw blade: electric; Width stop adjustment: electric; Display Saw Blade Angle: Digital; Display Cutting Height: Digital; Display Width Stop: Digital; Display cutting ruler: Digital; Saw blade diameter: 400mm; Speeds: 3000 / 4000 / 5000 rpm; Motor power: 7 kW; Engine brake: yes / automatic; Suction port: 80mm and 120mm; Machine length: 3400mm; Machine width: 2000mm; Weight: 1000kg;