used ROUNDO for sale

Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineROUNDO - R-72-S MACH-ID 8888 Make: ROUNDO Type: R-72-S Year: 1999 Horizontal + Vertical Shaft Ø240 mm Number of rolls3 Resistance moment320 CM³ Capacity flat175 x 40 x R=1200 mm Capacity Tube190 x R=2500 Ø x mm Capacity bar110 x 110 x R=1500 mm Capacity T-Profile160 x 20 x R=1400 mm Capacity HEA-Profile240 x R=1500 mm Working speed0 - 7000 mm/min. Adjustment siderolls0 - 400 Side supports Fully hydraulic machine Hydraulic side support in & out Hydraulic side support up & down  Set universal rolls Read out system Positioning side rolls  

Rounds: 225 mm Squares: 75 mm Flats: 0 mm Flats on edge: 0 mm Angles: 75 mm (1) horizontal / (2) vertical: 1   Make Roundo R3 Type R 3 Profile bender Year 1985 Roundo R 3 Horizontal and vertical profile bender Outside diameter max. (mm)Angle 75 x 75 x 7 Inside diameter max. (mm)IPE 140 x 700 Max. pipe length (mm)Shaft 75 mm Max. angle Rolls 225 mm Wall Thickness (mm)Cap. 14 cm3 Remote control  

Rounds: 188 mm Squares: 65 mm Flats: 0 mm Flats on edge: 0 mm Angles: 60 mm (1) horizontal / (2) vertical: 1   Make Roundo R2 Type R 2 Year 1995 Roll = 188 mm Outside diameter max. (mm)Shaft = 65 mm Inside diameter max. (mm) 3 rolls driven Max. pipe length (mm)Bend section 7 cm3 Max. anglePower 2.2 kW Wall Thickness (mm) Optical readout Angle 60 x 60 x 6 x 600 IPE 100 x 500 mm T 60 x 60 x 7 x 600  

Sheet thickness: 18,00 mm Bending length: 2550 mm Number of rolls: 4   Make Roundo 18 mm Type PS 280 Year 1988 3 roll plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 2.550 mm Number of rolls 3 roller Optical read out position Hardned rolls Hydraulic machine  

Sheet thickness: 18,00 mm Bending length: 3000 mm Number of rolls: 3   Make Roundo 18 mm Type PS 310 Year 1980 3 roll hydraulic plate bender Sheet thickness (mm) T = 18 mm Bending length (mm) L = 3.000 mm Number of rolls 3 roller Top roll = 310 mm Hydraulic opperated Dro positions side rolls  

Capacity: 360 t Diameter: 140 mm Length: 0 mm Make Roundo R 5 S Type R 5 S Year 1989 Section modulus 50 cm3 Outside diameter max. (mm)Top shaft = 140 mm Inside diameter max. (mm)Lower shaft = 120 Max. pipe length (mm)Rolls = 360 Max. angle Power = 11 kW Wall Thickness (mm) Weight 4000 Kg Tube = 142 x 1.800 mm HEA = 140 x 900 mm Some tooling  

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Make Roundo R 5 S Type R 5 S Year 1989 Section modus 48 cm3 Outside diameter max. (mm) Roll = 385 mm Inside diameter max. (mm) Power 7.5 kW Max. pipe length (mm)Flatt 100 x 30 Max. angle U over Y = 200 Wall Thickness (mm)U over X = 100 Speed 0 - 7 M/min.Set with rolls Hor. & Vert. opperated  

Sheet thickness: 35,00 mm Bending length: 1000 mm Number of rolls: 4   CNC Brand: _Unknown / Other CNC Model: Roundo CNC

Capacity: 0 t Diameter: 400 mm Length: 180 mm

Sheet thickness: 20,00 mm Bending length: 2000 mm Number of rolls: 3