used STEPHAN for sale

Universal machine (cutter, kneader, mixer, stirrer) in stainless steel design, primarily for the production of foodstuffs such as sausages, pasta products, sauces, etc., speed can be switched in two stages (680 / 1,430 rpm), drive power 3.3 / 4.5 kW.

Universal machine Manufacturer : Stephan Type: UMC 12 F Content: 12 litres Technical specifications : Bowl capacity 12 liters, batch capacity 2-7 liters, standing on stainless steel table Bowl stainless steel, lid stainless steel up to 3000 rpm. frequency-controlled Vacuum-resistant Double jacket for cooling/heating Manual wall stripping suitable for mixing, crushing, emulsifying Very good and functional condition. Equipment: Double coat Stainless Steel Bowl Stainless steel lid Stainless steel table Temperature control unit Vacuum pump 1x Knife Insert

Stephan UM44E Universal Machine three speeds (695/1445/2900 rpm) with knife insert electrically driven plastic wing Machine tiltable for removing the processed medium Machine comes from a catering service where it was only used very rarely, so it is in correspondingly very good condition Video about test run available

Universal machine Manufacturer : Stephan Type: KG 150 Technical specifications : The machine is suitable for slicing, grating, grating, shredding, straining and whipping Hourly output 300 – 800 kg/h Agitator with 2 speeds 142/284 rpm stainless steel

Universal machine Manufacturer: Stephan Type: KG 160 Technical specifications : kW 1.1/1.8 RPM 152/296 HZ 50 Suitable for cutting, grating, pureeing, grating depending on the tool used

Stephan UMC5 Universal Machine used Stepless speed Bowl capacity: 5 litres Double coat Frequency Inverter 300-3000rpm Knife insert very good condition with vacuum pump and temperature control unit should be thoroughly cleaned before use. Machine comes from a pharmacist who closed the pharmacy for reasons of age, i.e. first-hand. Only the temperature display does not work. Otherwise, it is fully functional and runs neatly and quietly. Video about test run available

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan

Universal Mixer Stephan Bäcker Boy BB100 - Baker Mixer Stephan - Model Baker Boy BB100 - 100 litres - 11 kW - 24.5 A - 380 volts - Shell diameter: ø65cm - Boiler interior height: 39cm

Stephan UM5 Universal Machine Machine is in good condition according to its age Two speeds + pulse button 400V Removable boiler with knife insert Plastic sash in the lid at the tip worn, this does not affect the function Video about test run available

Stock # U2441-2 Used, universal mixer/cutter by Stephan (DE) model UMC5. Mixing chamber designed in stainless steel has total volume 6 l. Working volume in range from 0,5 up to 3 l. Mixing chamber is rated for work on pressure -1 bar, at temperature +95 C. It has stainless steel heating jacket with volume 0,7 l, rated for work on atmospheric pressure and temperature up to +95 C. Top cover designed in polyphenylsulfon (PPSU), has installed manually operated scrapper agitator. Main agitator is equipped with cutting knife, designed in non-corrossive steel and is bottom driven by el. motor with power 0,78 KW, 230 V, 50 hz. Working rotation of agitator adjustable in range from 300 up to 3000 rpm. Mixer has local control panel and is equipped with water ring vacuum pump by Stephan type VYI2-GRD.006, water flow - 1.4 l/min. Pump is driven by el motor 0.12 kW. There is also electric heating  ...

Stephan UMC5 Universal Machine used Bowl capacity: 5 litres Double coat PT100 Probe Frequency Inverter 300-3000rpm Machine is in a very dirty condition, so should be cleaned thoroughly before use The machine is powered by 230V Video about test run available

We are selling here a universal machine from the manufacturer Stephan, type UM44-S in a very good used and functional condition. The machine runs on 400 volts, 2.2/5.5 kW, completely stainless steel, for cutting, mixing, kneading, stirring, workshop tested, immediately ready for use, dimensions W/D/H 130/60/110 cm, others on request.

Stephan micro cutter .model MCD20-150 For fine cutting and emulsifying also suitable for frozen products Output depending on product up to 4,500kg/h Year of manufacture 2019 . good working order , done very little work .

Cutter with new stainless steel special blade, UMB25 Stephan, used Private sale on commission from a customer. You will receive an invoice without VAT. Used and overhauled! Attention: Our customer has had a new stainless steel blade with a special grind made for this Stephan cutter (cost approx. € 4,000). It can be used to grind seeds, hemp seeds, mustard seeds, nuts, sesame seeds, etc. The machine is fully functional. You are welcome to test the machine with your product at our premises. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for ...

Stephan Universal Machine Blender UMB 40 Bäckerboy Bowl capacity approx. 45 litres with tilt function Capacity approx. 10 to 180 litres/hour 2900 rpm Connection 400V, 5.5 kW, 16A-CEE plug Machine Many more blenders in stock

Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.

Height=0.81 m, Overall length= 1.75 m, Overall width= 1.03 m, Net weight= 510 kg,

Height=1.2 m, Overall length= 0.8 m, Overall width= 0.65 m, Net weight= 130 kg,

Height=1.2 m, Overall length= 0.8 m, Overall width= 0.65 m, Net weight= 200 kg,

Height=1.2 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 177 kg,

Height=1.15 m, Overall length= 0.6 m, Overall width= 0.8 m, Net weight= 152 kg,

Height=1.35 m, Overall length= 0.9 m, Overall width= 1.2 m, Net weight= 205 kg,

Height=1.41 m, Overall length= 0.9 m, Overall width= 0.65 m, Net weight= 210 kg,

Height=1.35 m, Overall length= 0.9 m, Overall width= 0.8 m, Net weight= 194 kg,

Height=0.75 m, Overall length= 1.8 m, Overall width= 1 m, Net weight= 450 kg,

Height=1.06 m, Overall length= 2.22 m, Overall width= 1.12 m, Net weight= 977 kg,

Height=1.24 m, Overall length= 0.67 m, Overall width= 1.38 m, Net weight= 280 kg,

Spare parts for different Stephan UMM/SK - TC/SK Universal machines. The lot of spare parts is existing out of:, - 4x Springs., - Several steam injection nozzles and components., - Temperature indicator., - Knife nut., - Several scraper blades., - Gummies., - 9x Used Stephan 80 knifes., - 2 New Stephan 80 knifes., - 2x Used Stephan 25 or 40 knifes., - 4x Manual clamps for fixing the lid., - Vacuum chamber., - Filler bushings Stephan TC/SK 600., - Part of a pneumatic outfeed valve., - 4x Sieve plates., Type of Machine: Universal machine

Single envelope tank 2 mixing accessories as well as the stirring/kneading accessory, Elec: 340 V / 50 Hz / , 1/min: 1420 / 2800, Capacity of the tank : 12 liters , Charge capacity: 2 to 8 liters max