Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) WEILER Condor 81

Weiler Condor 81 - Universal lathe

- K+C 3-axis position indicator
- Bison 3204-160 3-jaw lathe chuck
- Collet chuck + various collets
- Feed protection
- Multifix
- Coolant device
- Swarf back wall
- Full service carried out (oil change, belt change, etc.)
- Year of construction 1984

Specifications
- Circumferential Ø over bed: 330 mm
- Circulating Ø over face slide: 185 mm
- Turning length between tips: 750 mm
- Turning length between tips with covered guide and pull spindle: 650 mm
- Tip height: 165 mm
- Bed width: 240 mm
Fulcrum shaft:
- Spindle head DIN 55027: size 5
- or similar to DIN 55029 (Camlock D1): size 4
- Spindle Ø in the front bearing: 70 mm
- Spindle passage: 40 mm
- Inner cone according to DIN 228: MK5
- Centering tip according to DIN 806: MK3
- Face plate Ø max.: 280 mm
- Chuck Ø normal: 160 mm
- Chuck Ø maximum: 200 mm
Tool slides:
- Guide length of the bed slide: 365 mm
- Facing slide travel: 175 mm
- Face slide spindle pitch: 3 mm
- Width of the face slide: 140 mm
- Upper slide travel: 140 mm
- Upper slide spindle pitch: 3 mm
Tailstock:
- Quill stroke: 110 mm
- Quill Ø: 50 mm
- Mounting cone DIN 228: MK3
Spindle speeds:
- Number: 16 / 32
- Range: 45-2800 / 22-2800 rpm
Feeds:
- Number: 120
- Normal range longitudinally over gears, meter/inch: 0.016 - 0.25 mm/rev
- Normal range longitudinally over timing belt, meter/inch: 0.022 - 0.5 mm/rev
- Steep area longitudinally over gears, meter/inch: 0.125 - 2 mm/rev
- Steep area longitudinally over timing belt, metre/inch: 0.045 - 4 mm/rev
- Plan feeds: 0.3733 x longitudinal feed
Thread pitches:
- Standardised metric: 0.18 - 28 mm
- Standardised inches: 80 - 1 1/2 speed
- Module: 0.1 - 9 mm
- Diametrical pitch: 200 - 2 3/4 speed
- Steep thread device: 8-fold
- Lead screw pitch: 6 mm / 4 gear/
Workpiece weights:
- between spikes without sticks: 160 kg
- between tips with setting sticks: 50 kg
- Largest piece mass flying (incl. clamping device): 125 kg
Electrical data:
- Motor power: 3 kW
- Rated current motor: 7.1 A
- Operating voltage: 400 V
- Control voltage: 42 V
Space requirements and weights:
- Dimensions WxHxD: 1832 x 1290 x 880 mm
- Turning spindle above floor: 1150 mm
- Weight: approx. 1020 kg

seller offer No. resale 100219