Model
(Manufacturer: HAMMERLE)
Manufacturer: Hämmerle / M+S Brugg Type: AP175-4600 Year of Make: 1984 Press force: 1750 KN Working length: 4600 mm Stroke: 265 mm Projection: 300 mm Weight: 20500 kg We have another identical machine on offer at the same location.
Key data: 175 t, 3100 mm
Hämmerle AP175-3100 - Hydraulic press brake - Control: Cybelec DNC 7400 (overhauled & new display) - Controlled axes: Y1, Y2, X, R - Stop finger can be moved manually - Machine not fully functional (error in tool clamping) - Year of construction 1985 Specification - Max. pressing force: 1750 kN - Max. working length: 3100 mm - Max. stroke: 265 mm - Projection: 300 mm - Operating voltage: 400 V - Dimensions WxHxD: approx. 4300 x 3300 x 2650 mm - Weight: 16100 kg
Key data: 200 t, 400 mm
Ref. No. 00785 Description of the plant: Used press brake Manufacturer: Hämmerle Model AP 200 – 3600 Built in 1991 Press force 2000KN (200 T) Ready to work 3600mm Maximum stroke 400mm Projection 500mm Keystrokes 6 Control DNC 7000 Installed power 18.5kW Weight 21,000 kg Condition of the plant under power Immediate Submission Date There are several tools that can be purchased in addition to the machine.
Ref.nr. 00766 Description of the plant Used press brake Manufacturer: Hämmerle M+S Brugg AG Model AP 100 – 2100 Year of construction: 1991 Max. pressing force 1000KN Max working length 2100mm Max. stroke 400mm Projection 300mm Mass Weight 11500kg Operating voltage 380V 50Hz Control voltage 24V Total connection 23 KW Nominal current of the back-up fuse 63 A
Manufacturer: Hämmerle Type: TRM 50/750 Year of construction: 1990/ 2023 Overhauled: 2023 Sheet width: Max. 750 mm Sheet thickness: approx. 0.5-12 mm Part length in flow direction: min. approx. 100mm Feed speed: 2-20 m/min Number of straightening rollers: 19 pcs Diameter: 50mm Workpiece inlet height: 900mm Power requirement: 31kW Total weight: approx. 10.000kg
250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
Technical data: -Pressure capacity 2000 kN -Max working width 3100 mm -Stand round 3200 mm -Stand RADIUS 300 mm -Max mounted height 965 mm -Hub, or insertion depth Steplessly adjustable 0-400 mm -Plunger speed forward + reverse per 100 mm / sec -Operating speed in 9 steps selectable 1-10 mm / sec -Drive 400 V / 26.5 kW - space requirement approx. B H 4400 x 3500 X 2200 mm -Weight approx. 18500 kg -with: - CNC - control CYBELEC ModEva 15s BJ. 2007 -Back gauge with 4 controlled pneum. on the side and height-adjustable stop fingers -controlled bending AIDS in the velocity range -Hydr. -Pneum.. Clamp of the upper tool + substation witness -mot. Crowning / hydro cushion in the table -laterally movable support arms -E - foot switch -split pointed tool R 1-100 t / m, split die
Hydraulic Abkant and used stamping press, under current hydraulical embossing press / press brake, used, under power Serial / make: Hämmerle type / model: 2s 100-2050 year / year: 1978 pressing force / force: 100 t Bending length / operation length: 2050 mm tappet adjustment / ram adjustment: 150 mm Distance from plunger table / distance ram to table: 400 mm Stroke / stroke: 150 mm connection value / connected load: 11 kW weight / weight: 5,9 t
Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.
Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.
material width: 750 mm material thickness: 0,5 - 12 mm no. of straightening rolls: 19 Stk Feed speed: 2-20 m/min. straightening roll diameter: 50 mm Workpiece infeed height: 900 mm total power requirement: 31 kW weight of the machine ca.: 10 t - Part length in direction of passage min. ca. 100mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t chamfer lenght: 2050 mm total power requirement: 11 kW weight of the machine ca.: 5,9 t dimensions of the machine ca.: m - ram adjustment: 150 mm - distance ram to table: 400 mm - stroke: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information.
Max. pressing force: 1000kN, max. working length: 3100mm, throat depth: 250mm, connected load: 18kW, weight: 9.5t, operational hours counter: 76,566h, with accessories and documentation, was maintained regularly.
pressure: 2000 kN chamfer lenght: 3100 mm distance between columns: 3240 mm Control: Infinitron ram stroke: 400 mm work height max.: 1104 mm throat: 250 mm table width: 160 mm pre-running speed: 160 mm/s working feed: 1-10 mm/sec return speed: 160 mm/sec tank capacity: 550 l total power requirement: 28 kW weight of the machine ca.: 16,6 t dimensions of the machine ca.: 4,4x2,7x3,4 m CNC control Infinitron Hydro cushion MHK 1-30 Three-point die holder DH 1-30 Stop system A2 with a travel range of 600 mm Adjustment of the stop slide along the stop bar by separate controlled Z-axes Sheet metal support system H 2 Adjustment of the individual sheet metal support brackets through separately controlled W-axes Bracket SK 10 with lifting aid 0-45 ° with linear guide The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
