Punching machine with large table and large recess in the table
Compressive force: 80 t Projection: 350 mm Table size: 700 x 720 mm Diarrhoea level in table: 160 mm Plunger area: 300 x 445 mm Plunger adjustment: approx. 80 mm Stroke adjustment: 8 - 100 mm Stroke rate: approx. 90 rpm Drive motor: 380 V, approx. 5 kW Dimensions: 2050 x 1100 x 2450 mm Weight: approx. 3800 kg
Pressing force 50 ton Stroke 8 - 100 mm Max. stroke rate 140 strokes/min Drive power 3 kW Clamping surface 650 x 500 mm Machine weight approx. 2,750 kg
Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg
Tape straightening machine with feed roller pair, upper half hydr. foldable, roll width max. 320 mm, rollers 60 mm, otherwise see pictures
Pressure: 65 tons -Stroke: 140 mm -Table size: 720 x 600 mm -Plunger surface: 500 x 300 mm -Tappet adjustment: 80 mm -Strokes: 20-40 per min. -. Weight: 6000 kg -Dimensions (L x W x H): height 3.1 m -Clamping hole ø 60 x 80 mm More info on request
used
Force of pressure: 100 t projection: 350 mm table size: 690 x 840 mm Durchfalloch in the table: 160 mm table adjustment: slide area: 450 x 600 mm slide adjustment: 80 mm stroke adjustment: 8-100 mm stroke rate: 60 / min drive motor: 380 V, 5.5 kW space: 1850 x 1850 x 2650 mm weight: 6800 kg
Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton
pressure:100 t throat:350 mm stroke:6 - 100 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:850 x 700 mm hole in the table:470 x 150 mm table height over floor:855 mm ram surface:450 x 300 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,0 t dimensions (WxDxH):1,5 x 2,3 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
Center height: approx. 230mm, center width: approx. 1000mm, orbital diameter over bed: approx. 480mm, orbital diameter over support: approx. 200mm, spindle bore: approx. 45mm, spindle speed range: 2000rpm, drive power: 4kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1500mm, weight: approx. 1700kg. On-site inspection is possible.
Single column - eccentric press HEILBRONN type REPV 75Fabr. No. 4467 Year of construction 1972Compressive force 75 ton. Projection 300 mmTable size 720 mm x 590 mmPlunger size 450 mm x 295 mmTable height above floor 735 mmPlunger stroke 12 - 140 mmPlunger adjustment range 100 mmInstallation height max. 400 mmPin hole 40 mmStroke rate 43/86 strokes/min. Motor power 4.4/7.5 kWAnd drive power 400 Volts 50 Hz.- Table height adjustment with 2 support spindles- Drive with wheel counters- 2- Motor speeds-
pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 350 mm stroke: 8-80 mm dayligth: 300 mm no. of strokes: 125 Hub/min ram - range of adjustment: 80 mm ram surface: 400x300 mm table surface area: 850x700 mm hole in the table: 350x200 mm total power requirement: 7.5 kW weight of the machine ca.: 4.5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
