Continuous twin-shaft mixer with multi-plate clutch, suitable for vacuum operation. Mixing trough and double cylinder length: 1,500 mm + 500 mm, mixing trough width: 700 mm.
Robust smoothing mill with a roll diameter of 1000 mm and a roll width of 800 mm, including drives and auxiliary drives. Current residual sheath thicknesses: 80 mm / 85 mm. Optionally available: 1 set of new roller shells.
Rolling mill 800x800 mm, built in 1988 Roller casing table: 70 mm
Haendle roller gear 2,000 mm x 800 mm, with new gearbox and runner rings, after overhaul. Throughput capacity 100 t/h
Collection plate diameter 1900 mm Volume throughput 12 cbm/h
Roll gap from 0.6 mm. New roller shells. Power at gap of 0.8 mm is 40t
Roller crusher with 800 mm roller width and 800 mm roller diameter, incl. main roller drives and auxiliary drives, manual gap adjustment. In regularly maintained condition, rollers without ridges. Available at extra charge: Suitable dust filter by Hellmich.
Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
Extrusion press with 400 mm Ø, 55 kW drive, hard cast screw and pre press PZSVG 40 (built 1996, 15 drive), on 4 hydraulical posts. Complete, incl. 1 set spare parts (replacement screw and windlass).
Steel box feeder with steel belt and combined drive unit for belt and windlass. Box dimensions: Ca. 2.000 mm x 750 mm x 500 mm high; incl. hopper on top with the following inlet dimensions: 1.600 mm x 1.200 mm x 360 mm high. Condition: Solid body; motor must be revised, part of belt needs to be greased / made flexible (due to standing time)
Extrusion press with 400 mm , drive 55 kW, hard casting screw wings and pre-press PZSVG 40 (Built 1996, drive 15 kW), on 4 hydraulic spindles. Complete with 1 spare part set screw and reel.
Box feeder with steel scale strap and combined drive for belt and reel over pre-bed. Box dimensions: Approx. 2,000 mm x 750 mm x 500 mm high; incl. hopper (on box) with the following inlet dimensions: 1,600 mm x 1,200 mm x 360 mm high. Condition: Good substance; Motor must be overhauled, tape partially made viable.
