Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.
Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible.
Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible.
grinding length:500 mm grinding width:200 mm workpiece height:250 mm turning speed range - stepless:1000 - 2800 U/min surface area:600 x 200 mm total power requirement:2,6 kW weight of the machine ca.:1,6 t Fully functional Jung surface grinder
Rear grinder JUNG type HA 20EquipmentNo: 3344Profile depth: max. 15 mmAngle adjustment: 0 to 2Magnetic plate: 115 x 115 mmClamping range: 110 x 75 mmHeight magnetic plate: 119 mmWorkpiece dimensions L x W x H: max. 60 x 100 x 50 mmPower consumption: 1 ampereOperating voltage: 24 volts, direct voltage (V/DC)- mechanically switchable permanent magnetDimensions L x W x H: 500 x 200 x 125 mmWeight: 25 kggood conditionSuitable in cutting tool mold making for tapered back-ground cutting plates or mold inserts.; used
Magnetic table size: 700 x 400mm, grinding wheel: Ø 210 - 400mm, grinding wheel width: 50 mm, main spindle speed: 1500 - 5700min-¹, weight: 7.6t, with documentation and accessories, on-site inspection is possible.
Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible.
With documentation, has been maintained regularly, an inspection is possible.
used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,, 4 pieces with 0.9 mm cutting thickness
Rear grinder JUNG type HA 20 Device No: 3344 Profile depth: max. 15 mm Angle adjustment: 0 to 2 Magnetic plate: 115 x 115 mm Clamping range: 110 x 75 mm Height magnetic plate: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Current consumption: 1 ampere Operating voltage: 24 volts, direct voltage (V/DC) - mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg Good condition Suitable in cutting tool mold making for conical background cutting plates or mold inserts.; used
: 450 mm Länge x-travel: 500 mm workpiece height: . mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,, 4 pieces with 0.9 mm cutting thickness
grinding length: 350 mm magnetic clamping plate: 300 x 150 mm grinding width: mm weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
centre height: 76 mm centre distance: 190 mm spindle bore: 21 mm taper MK: 3 weight of the machine ca.: 40 kg dimensions of the machine ca.: 720 x 210 x 215 mm collets: tailstock: dead centres: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rear grinder JUNG type HA 20 Device no.: 3344 Profile depth: max. 15 mm Angle adjustment: 0 to 2 Magnetic plate: 115 x 115 mm Clamping area: 110 x 75 mm Height magnetic plate: 119 mm Workpiece dimensions L x W x H: max. 60 x 100 x 50 mm Current consumption: 1 Ampere Operating voltage: 24 volts, DC voltage (V/DC) - mechanically switchable permanent magnet Dimensions L x W x H: 500 x 200 x 125 mm Weight: 25 kg good condition Suitable in cutting tool mould making for conical back-ground cutting plates or mould inserts.; used
Technical data Centre height: 76 mm Distance between centres: 160 mm Taper in spindle: 3 MT Overall dimensions machine: Length: 720 mm Width: 210 mm Height: 215 mm
grinding length: 400 mm grinding width: 150 mm workpiece height: 300 mm turning speed range - stepless: max. 2800 U/min work table:: 400 x 150 max. dist. between floorpl. and spindle-nose: 350 mm grinding wheel size: 200 mm feed: Tisch 2,0 - 20,0 m/min voltage: 380 V total power requirement: 2,6 kW weight of the machine ca.: 900 kg range L-W-H: 1300 x 1200 x 1500 mm Furnishing: - compact surface grinding machine - K. JUNG magnetic clamping plate S1 10/25 - Lots of spare grinding wheels - side control panel - K. JUNG sanding dust extraction - additional vice The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
internal diameter: 200 mm grinding depth: 250 mm swing diameter: 330 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
