Model
(Manufacturer: MAHO)
Travel X/Y/Z: 600mm/500mm/400mm, table dimensions X/Y: 900mm/600mm, spindle mount: SK40, speed: 6000rpm, tool positions: 24, feed: 6m/min, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 4000mm/4000mm/2700mm, weight: approx. 5000kg. On-site inspection is possible.
x-travel:600 mm y-travel:400 mm z-travel:400 mm total power requirement:16 kVA weight of the machine ca.:2,3 t dimensions of the machine ca.:2,4 x 2,2 x 1,9 m Number of working hours:9306 h complete electr. Setup, CNC control HEIDENHAIN, Coolant device, lighting, horizontal milling device with long milling spindles, half cabin, adjustable feet and techn. Documents.
x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min spindle taper ISO: 40 quill stroke: 50 mm range L-W-H: 1600x2000x1850 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min weight of the machine ca.: 1.8 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis MAHO MH1200S milling machine was manufactured in 1990. It features a travel range of 1200 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. Equipped with a PHILIPS 432 CNC control, it has a spindle speed of up to 6300 rpm and a 36-slot tool changer. The machine can handle a maximum workpiece weight of 1000 kg. Contact us for further details regarding this milling machine.
CNC Tool Milling Machine MAHO Type MH 400 EMasch. No. 43072 Year of construction 1989Travel distances X: 400 mm Y: 250 mm Z: 375 mmTable size 700 x 270 mmDistance spindle nose / table max. 410 mmTool holder ISO 40 with pulling bolt type BSpindle speed 80 - 4000 rpm. 18 stepsFeed speed 1-1500 mm/min. infinitely variableRapid traverse (X, Z and Y) 2.5 m/min. Pinole Shift Vertical 50 mmSpindle Drive 2.2 kWNex Connection 400 Volt, 50 Hz, 19 kVA- Swivel Control Panel with CNC Path Control PHILIPS 432-
Univ. Tool Milling Machine, Milling Machine MAHO Type MH 400 PMasch. No. 41364 Year of construction 1981Control Heidenhain TNC 125 (Active Digital)Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mmTravel paths with handwheel X: 400 mm, Y: 250 mm, Z: 375 mmTable size 690 x 270 mmSpindle holder ISO 40Tool clamping hydraulicSpindle speed 40 - 2500 rpm. infinitely variableFeed X and Z-axis 5 - 1000 mm/min. infinitely variableFeed Y-axis 5 - 670 mm/min. infinitely variableRapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinole Shift
X-travel: 500mm, y-travel: 400mm, z-travel: 350mm, quill stroke: 50mm, rotational speed: 20-5000/min, connected load: 10kVA, controls: Maho CNC 432, length: 2022mm, width: 3030mm, height: 1915mm, weight: 2.1t, operational hours counter: 29,578h, with documentation, without spare parts, mechanically and electrically the machine runs flawlessly, the control elements were recently overhauled.
Model: MH 1200 S Manufacturer: MAHO Type of machine : Milling machine Condition : Used Find more here - / Contact us at -
used
1991 Maho MH500 W The machine is no longer powered Precision pull-down vice including Complete documentation, Year of manufacture 1991. Machine inspection is available to prove it is fully functional. Find more here - / Contact us at -
x-travel: 700 mm y-travel: 450 mm z-travel: 500 mm Control: Phillips 432 head swivability - left: ° diameter: Drehtisch 600 mm total power requirement: 40 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. swivel, tilt and turn table similar to lid, Maho milling machine table Attachment table for Univ. tool barrel machine Table size 680 x 340 mm Groove width 14 mm Groove spacing 45 mm Rotatable 360 (1 turn on the handwheel = 4 on the table) Vernier 240 Graduations in minutes Tiltable +/- 30 (drive via square with threaded spindle)Swivel 30 (drive via square with threaded spindle) - 7x T-slot 14 mm - Mounting plate 320 x 220 mm Dimensions L x W x H 780 x 470 x 320 mm Weight approx. 180 kg Good condition; used
Univ. tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with handwheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm. infinitely variable feed X and Z-axis 5 - 1000 mm/min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinole shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 volts, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine - Coolant device in the machine base - Operating instructions Space required L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg Good condition; used
Control: Grundig x-travel: 700 mm y-travel: 500 mm z-travel: 400 mm weight of the machine ca.: 2,8 t documentation available: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: . mm Motor output: . kW Spindle diameter: . mm reus: . U/min Weight: . kg Year: . fabric-no.: 42965 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min spindle taper ISO: 40 quill stroke: 50 mm range L-W-H: 1600x2000x1850 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used
serial number: 82586 Control: Heidenhain 234 x-travel: 800 mm y-travel: 500 mm z-travel: 550 mm table size: 900 x 600 mm : max. 3.000 U/min tool adaptor: SK40 weight of the machine ca.: 2,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 500 mm z-travel: 650 mm tool taper: SK 40 quill stroke: 100 mm turning speed range - power take off spindle: 40-2000 U/min Feed: 5-2000 mm/min Rapid movement: 4000 mm/min Control: Heidenhain total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min weight of the machine ca.: 1.8 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 500 mm z-travel: 400 mm control: 432 spindle taper ISO: 40 turning speeds: 20-6000 U/min Tool changer: 24 total power requirement: 35 kW weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,6x3x2,925 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1250 mm y-travel: 1000 mm z-travel: 1000 mm taper ISO: 50 Table dimensions: 650 x 1000 mm spindle speeds: 32-1600 voltage: 380 V total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 700 mm y-travel: 500 mm z-travel: 600 mm size of pallet: 630 x 500 mm spindle taper ISO: 40 turning speed range: 20 - 6300 U/min feeds longditudinal/cross/vertical: 1 - 4000 mm/min rapid travel x/y/z: 10 / 8 / 10 m/min control: PHILIPS CNC 432 spindle motor: 15 kW total power requirement: kW weight of the machine ca.: 6,0 t dimensions of machine: 4,10 x 2,17 x 2,55 m acc.: hydr. swivelling head with hydr. tool clamping, chip conveyor, coolant, entire protection cabin with pallet changer (two pallets) and 60-pos. tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
