Model
(Manufacturer: DECKEL)
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.6 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Spindle speed over 2 motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 stages Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz feed in the X and Y axes - Pinol shift on the vertical milling head - fixed angle table - Coolant device with mechanical pump in the machine foot - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg good condition Machine new Painted in original grey tone; used
Univ. Swivel-tilt-rotary table DECKEL suitable for FP 2L or FP 3L or FP 4L Item no. 2314-0301 Year of construction: approx. 1975 Clamping surface: 1000 x 520 mm- 6 clamping grooves 16 mm, distance 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees- can be tilted from/to the machine +/- 15 degrees - swivelling +/- 15 degrees permissible load max. 1000kg Weight: 400kg good condition; used
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 52185/08 Year of construction 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.4 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Two motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table coolant device in the machine foot - adjacent control cabinet - counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm Weight approx. 1000 kg very good condition; used
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,44 x 1,8 x 2,05 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal engraving and copy milling machine make DECKEL type GK 21Machine -No: 56 974Worktable clamping surface: 200 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Table length: 750 mm Table width: 460 mm Longitudinal X: 400 mm Cross Y: 400 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11
Table length: 800 mm Table width: 500 mm Longitudinal X: 600 mm Cross Y: 500 mm Vertical Z: 500 mm CNC Brand: _Unknown / Other CNC Model: Dialog 11 Make Deckel FP4 CC Type FP 4 CC Year 1988 Dialog 11 Table length (mm)L = 800 Table width (mm)W = 500 Longitudinal X (mm)X = 600 Cross Y (mm)Y = 500 Vertical Z (mm)Z = 500 Sk40 / 80 / 6300 Rpm High class machine !
Table length: 800 mm Table width: 400 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Make Deckel FP4M Type FP 4 M Year 1987 Aktive digitaal Table length (mm)L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 500 Cross Y (mm)Y = 400 Vertical Z (mm)Z = 400 Sk 40 / 2500 Rpm 3 Axis HeidenHain
x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 3-axis-digital display ACU-RITE • 5 tool tapers, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. milling cutter diameter: 0.5 mm Max. milling cutter diameter: 17.5 mm Max. radius to grind: 10 mm Collet drill: 17.5 mm Relief grinding angle max.: 45 ° Grinding wheel speeds fix: 4500 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 0.55 kW Machine´s weight about: 125 kg Overall dimensions machine: Length: 660 mm Width: 570 mm Height: 1400 mm
x-travel: 1170 mm y-travel: 500 mm z-travel: 370 mm table load: 2 t spindle turning speed range: 25 - 2500 U/min feeds: 4 - 2000 mm/min rapid traverse:: 4000 mm/min taper ISO: 40 total power requirement: 12,5 KVA weight of the machine ca.: 4 t dimensions of the machine ca.: 2,3 x 1,9 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 0.7 t Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm control: Grundig Contour tool taper: SK40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle taper ISO: 40 x-travel: 710 mm y-travel: 600 mm z-travel: 445 mm Control: Heidenhain type: TNC355 mm table surface area: 1000x550 mm turning speeds: 6300 U/min quill stroke: 80 mm Feed: 1-3600 mm/min rapid traverse: 6 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm table surface area: 900x520 mm turning speeds: 4000 U/min tool taper: SK 40 Control: Heidenhain type: TNC 355 : elec. coolant: total power requirement: kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm control: Dialog 11 turning speed range - main spindle: 31,5-5.000 U/min power capacity - main spindel: 7,5 kW tool taper: SK 40 table surface area: Ø 500 mm Tool-Presetter:: 30 Stück feeds:: rapid travel ( X / Y / Z ): 6 m / min. m/min weight of the machine ca.: 4,3 t dimensions of the machine ca.: 3,5 x 2,4 x 2,2 L/B/H m Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
