Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid
Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works
Stainless steel tank standing 13,000 liters - 2 pieces in stock, Including insulation and agitator propeller. So far, they have been used for milk production. Approximate dimensions: Diameter: 2,100 mm, height incl. feet approx. 4,000 mm, height feet approx. 500 mm. Price ex works, delivery possible
Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 20,000 litres Diameter: approx. 2,000 mm Length: approx. 6,840 mm Weight: approx. 4,000 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer pu ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 25,000 litres Diameter: approx. 2,000 mm Length: approx. 8,390 mm Weight: approx. 4,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer pu ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 30,000 litres Diameter: approx. 2,000 mm Length: approx. 9,940 mm Weight: approx. 5,500 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer pu ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 40,000 litres Diameter: approx. 2,500 mm Length: approx. 8,720 mm Weight: approx. 7,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer pu ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 50,000 litres Diameter: approx. 2,500 mm Length: approx. 10,700 mm Weight: approx. 9,200 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer p ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 60,000 litres Diameter: approx. 2,500 mm Length: approx. 12,680 mm Weight: approx. 10,700 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 80,000 litres Diameter: approx. 2,900 mm Length: approx. 12,780 mm Weight: approx. 15,750 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer ...
Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2 • Installation of the liquid fertilizer ...
used
100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...
Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...
50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...
60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...
80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN ...
90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...
100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in ...
Used and new cantilever racks and pallet heavy-duty racks are offered. We will be happy to make you an individual offer. Please let us know the following: - length and height of the desired shelf, - number of specialist levels, - Professional loads.
Camshaft for DEUTZ 628 8-cylinder engine used Information on request We also have other DEUTZ camshafts in stock.
currently in stock: 1 pcs. 500 mm x 6m 1 pcs. 500 mm x 10 m 1 pcs. 500 mm x 12 m it is subject to prior sale!
PET filling line - capacity: 10.000 bph – 1,5 L Year of manufacturing: 1999 – 2006 Control system: Siemens S7 Working hours: 26588 h (total on compressor) consisting of: Blowing machine Blowmax 10 year of manufacturing: 1999 incl. Chiller OHF 1250 Omega year of manufacturing: 1999 Preform dumping, feeding and orientation device year of manufacturing: 1999 High pressure compressor Ateliers Francois CE46BSG 40 year of manufacturing: 1999 Air conveying system year of manufacturing: 1999 Krones Bloc consisting of: Bottle rinser Krones Variojet 2160-054-126 with 54 rinsing stations year of manufacturing: 1999 Bottle filler Krones VP-L60-113 / SV10 / S LM wiht 60 filling valves and 10head screw capper year of manufacturing: 1999 Cap feeding system Gassner year of manufacturing: 1999 Labelling machine Krones Canmatic 600-10 RM year of m ...
- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)
Choose a suitable roaster and stay flexible! We can offer various roasters as follows: - Short-term rental of min. 1 year - long-term rental incl. maintenance contract - discounted takeover option after expiry of the contract. - Roaster color can be determined individually. - Roasters are delivered, installed and your staff trained. - Entsteiner, Afterburner and Coffee Loader can also be ordered on request. - and much more! Contact us and find your perfect equipment! We have many ways to meet your exact needs. Get the all-in package and you don't need to spend time in the maintenance etc. of used roasters. Focus on your business and roasting process!
Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or U-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe condi ...
used
used
