MATEC 30 HV CNC machining center was built in 2001 in Germany by Matec Maschinenbau GmbH. The machine, designed for precision machining of oversized workpieces, is equipped with a number of reliable components with excellent specifications. This includes a tilting work head, a 24-position tool magazine and a chip extraction unit. All this is complemented by the intelligent BOSCH CNC control, in which advanced machining programmes are created in just a few steps. The MATEC CNC vertical machining center weighs approximately 15000 kg. Technical specifications of the MATEC 30 HV CNC milling machine - CNC controller: BOSCH TYP 3 OSA - feed in the X/Y/Z axis: 3000/600/800 mm - maximum spindle rotational speed: 9000 rpm - minimum spindle rotational speed: 20 rpm - spindle drive power: 16 kW - tilting work head - rotation angle of work head: ± 90° every 1° - 24-position tool magazi ...
Key data: 1300 mm, 600 mm, 800 mm
Auction 509 / Pos-No.: 15 Description: 5-axis CNC milling machine Make: Matec Type: 30HVK Year of Make: 2010 Serial No.: 1054 Description: Travel X/Y/Z - 1,300/600/800 mm, rotary table, Ø 630 mm, with spindle cooling unit, sep. Hydraulic power unit, control, Fabr. Heidenhain, tool changer, chip discharge, belt filter system, plus 1 tool trolley, equipped with approx. 60 tool holders, type HSK 63, workbench, approx. 1,500 x 700 mm, tool clamping device, substructure, 7 pull-outs, contents of machine accessories, tool cabinet, metal, 2-door, approx. 1,200 x 1,800 mm, content of clamping devices, cutting tools Good day this item is part of an insolvency online auction. The starting price is € 20,000.00 net (plus 18% buyer's premium, plus gross VAT).
Key data: 2000 mm, 800 mm, 1100 mm
Auction 509 / Pos-No.: 13 Description: 5-axis CNC milling machine Make: Matec Type: HV30 Year of Make: 2014 Serial No.: 1474 Description: Travel paths X/Y/Z-2,000/800/1,100 mm, rotary table, Ø 800 mm, with tool changer, belt filter system, spindle cooling, air filter, chip discharge, workbench, approx. 1,500 x 700 mm, substructure, contents of machine accessories. Tool holders, telescopic pull-out cabinet, 8 pull-outs, content tool holders HSK A63, control, Fabr. Heidenhain, Type D640 Good day this item is part of an insolvency online auction. The starting price amounts to € 57,000.00 net (plus 18% buyer's premium, plus gross VAT).
Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS
Control: Siemens Sinumerik 840D Travel: X-axis: 2,500 mm Y-axis: 600 mm Z-axis: 800 mm Table size: 3,000 x 635 mm Pendulum operation: 2x 1,250 mm Tool magazine: 36 - compartment Tool holder: HSK 63 Kessler motor spindle: 15,000 rpm Accessories Conveyor Partition Clamping hydraulics 3D Probe Heidenhain TS 460 Coolant Filter - Automatic door Oil skimmers
Key data: 3000 mm, 800 mm, 1100 mm
Matec 30 HV / 5 axes, Year of manufacture 2003, Control Bosch Type 3 Osa, Travel X/Y/Z 3000/800/1100 mm, Spindle speed up to 12,000 rpm, Mounting HSK 63, NC swivel milling head +/- 90°, Work table 3500 x 835 mm, integrated rotary table Ø 630 mm, IKZ 70 bar, Paper belt filters, Conveyor clamping hydraulics, NC Rotary Table, annual. Maintenance
Control Heidenhain iTNC 530 Speed [rpm] 18000 Travel X/Y/Z [mm] 3000/825/800 Tool pick-up HSK 63 General: Year of construction 2012 Travel X/Y/Z 3,000/825/800 (700) mm Speed 18,000 rpm Tool holder HSK 63 Spindle: Motor spindle technology Speed 18,000 rpm Power 3.0 kW Torque 191 Nm Tool holder HSK 63 NC rotary table: Technology Hirth-toothed swivel head B-axis +/- 95° Indexation 1° Workbench: Clamping area 3,500 x 900 mm Hole grid 720 x M16 + 540 x 16F7 Tool magazine: Technology Chain Magazine Tool Changer Double Gripper Number of stations 80 pieces Tool diameter max. 130 (70) mm Tool length max. 380 mm Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool breakage detection LASER Workpiece Measurement Radio Probes Renishaw Setup operation Electronic handwh ...
Control Heidenhain iTNC 530 Speed [rpm] 18000 Travel X/Y/Z [mm] 3000/825/800 Tool pick-up HSK 63 General: Year of construction 2012 Travel X/Y/Z 3,000/825/800 (700) mm Speed 18,000 rpm Tool holder HSK 63 Spindle: Motor spindle technology Speed 18,000 rpm Power 3.0 kW Torque 191 Nm Tool holder HSK 63 NC swivel head: Technology Hirth-toothed swivel head B-axis +/- 95° Indexation 1° Workbench: Clamping area 3,500 x 900 mm Hole grid 720 x M16 + 540 x 16F7 Tool magazine: Technology Chain Magazine Tool Changer Double Gripper Number of stations 80 pieces Tool diameter max. 130 (70) mm Tool length max. 380 mm Equipment / Accessories: Displacement measuring systems Directly in all axes Chip disposal chip conveyor Coolant supply IKZ system, 40 bar Tool breakage detection LASER Workpiece Measurement Radio Probes Renishaw Setup operation Electronic han ...
Volcanoring mini with WOK attachment The inventor and developer of the Volcanoring has been working with logs and their pyrolytic combustion for 40 years. By installing a log wood stove with heat exchanger in his house, he learned about the primary and secondary air ducting for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties in wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated downwards by the heat radiation before it reaches the fire. As a result, the wood burns at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature ...
Key data: 3 mm, 1 mm, 700 mm
Matec 30 HV machining centre Control: Heidenhain iiNC 530 Year of manufacture 2005 Travel: X-axis 3,000 mm Y-axis 1,000 mm Z-axis 700 mm B-axis: +-106° Tool magazine: 48-fold Tool holder: HSK 63 Motor spindle: 18,000 rpm Accessories - Paper belt filter 450L - Handwheel electronic - IKZ 20 bar -Aspirator -Conveyor - 3D touch probe - Minimum quantities of lubrication system
Key data: 1300 mm, 600 mm, 700 mm
Matec 30 L, Year of construction 2011, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,
Briquetting press MATEC F-Cube 20 new Dimension press LxWxH: 130x74x112 cm weight 233 kg Briquette square 30x30 mm Capacity approx. 10-25 kg briquettes / hour Size feed funnel approx. 0.33 m3 Motor hydraulic pump 2.2 kW, 3x 400 V, 50 Hz Electricity consumption approx. 1.1 kWh How we work Continuous operation Year of construction 2021 Additional options: - Extension line for briquettes with stand -Auto. Start-stop system for operation with level monitoring - Sensors for level monitoring - Hydraulic oil 30 liters - 3 m cable with Euro plug 16 A - Flange adjustment filter-hopper press The spec. Density of briquettes is about 900 kg / m3. The maximum wood moisture content is 15%. The measured noise level is 62 dB. New machine, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden ...
Volcanosquare MATEC The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached. ...
Volcanoring MATEC mini The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached. ...
Volcanoring MATEC V.1.0 The inventor and developer of the Volcanoring has been dealing with logs and their pyrolytic burning for 40 years. By installing a log firing system with heat exchanger in his house, he got to know the primary and secondary air ducts for optimal burning of wood with minimal smoke development and minimal ash accumulation. On this basis, Ari Schär developed the Volcanoring with comparable properties for wood burning. This grill draws the air via an adjustable hole system in the base area of the bowl. The incoming air is preheated by the heat radiation downwards before it comes to the fire. As a result, the wood burns off at a temperature of around 1000°C and leaves very little ash with little smoke development when the burning temperature is reached. When firing, the smoke development is correspondingly greater than when the operating temperature is reached ...
Vertical CNC machining center Manufacturer Matec Type HV 30 Year of construction 2000 Control Heidenhain TNC 426 Schwenkopf ( B-axis ) 3° degrees shepherd toothing Travel X/Y/Z 3000/600/800mm SK40 24-fold tool changer Speed range 20 - 15,000 rpm is throttled to 12,000 rpm Machine has milled 100% plastic coolant tank has never seen emulsion. It is in very good condition.
Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request
Matec 50 HV/NC 5-Axis (Traveling Column) CNC Vertical Machining Center Table size 1150 x 510 mm. NC rotary table (integrated) 1000 mm Travel X-axis 4000 mm. Travel Y-axis 1000 mm. Travel Z-axis 1300 mm. Number of tool places 48 pieces. Maximum speed of the working spindle 8,000 rpm. Tool holder HSK 100 A CNC control Heidenhain i TNC 530 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.
Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618 ...
Magnetic drum MATEC For iron capture Length about 400 mm Drive about 0.37 kW Gearbox engine with tin slide Weight about 150 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Scratch chain conveyor MATEC For wood chip extraction -Trogwidth 300 mm -Troghheight 450 mm -Troglänge about 5500 mm -Steel sheet 4 mm -Creation below once about 65 ° -Discard height from ground about 4500 mm -single-stranded chain guide links A-A 80 mm -Conveyor slats plastic height about 130 mm -Drive snail gearbox engine electric 1.5 kW, 3x400 V, 50 Hz Weight about 1100 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Drum chipper MATEC economy THS 600-2/6 -Catchment level / nominal height 200 mm, hacker feeder height Max 300 -Catchment width 600 mm -Rotor diameter 600 mm -Number of rotor blade 2 -Number counter Blade 2 -Screen of change of perforation 50/50 -Steak size nominal TMP quality 25/25 mm -Feed rollers top 2 -Feed rollers down 2 -Geared motor indent above 2.2 kW -Geared motor indent below 2.2 kW -Weight approx. 2000 kg -Hacker main motor 45 kW/3 x 380 V -Feeding speed nominal approx. 24 m / min. New machine, ready for use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 ...
Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...
The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...
The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following data also made of HARDOX. The content of flower pots, flower boxes, baked together grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diameter ...
