MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...
Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!
MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...
Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...
The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry., Capacity: 600 crates/h 10 strokes/min., Power: 5,5 kW, Current: 10 A, Voltage: 400 V, Frequency: 50 Hz, Length: 3000 mm, Width: 1540 mm, Height: 2600 mm, Weight: 1100 kg, Formats: 24 x 0,33 L Vichy, Running direction: Right-left, Operation / Control: Simatic S7-99, Base construction: Frame, height-adjustable, Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet
x-travel:3000 mm y-travel:1000 mm z-travel:1200/1300 mm spindle motor:32 kW spindle taper: ISO:50 spindle turning speed range:20 - 8000 U/min feed range:1-30000 mm/min rapid traverse feeds:30 m/min total power requirement:80 kW
This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information.
This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us.
Manufacturer: Matec Model: A20 Year of Manufacture: 2011 Type of Machine: Condition: used Control: Heidenhain TNC 530 Technical Specifications: - Travel (X/Y/Z): 1100 x 560 x 560 mm - Tool Changer: 20-station automatic - Spindle Taper: SK40 - Coolant System: Through-spindle coolant supply - Extraction System: FX7002 Recent Maintenance & Upgrades: - Spindle Overhaul: Completed in 06/2023 - Spindle Belt Replacement: Recently replaced - Spindle Motor Replacement: Completed in 01/2023 Find more here - / Contact us at -
Manufacturer: Model: Year of Manufacture : Condition : Used Specifications: - X-axis travel: 2000 mm - Y-axis travel: 600 mm - Spindle taper: SK40 - Tool changer: 36-position automatic tool changer - Coolant system: Through-spindle coolant supply Find more here - / Contact us at -
This 4-axis Matec MATEC 30 HV/K was manufactured in 2016, featuring a robust vertical machining center design. It includes a Heidenhain iTNC530 control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information.
This MATEC 30 HV (2003) Universal Machining Centre was manufactured in 2003 in Germany. It is controlled by a BOSCH TYPE 3 OSA Control unit. This CNC traveling column milling machine (3+2 axes) is equipped with a main spindle type DMS 112 with speed range up to max. 12,000 min/-1 and drive power 30 kW. It has a NC swivel head (Sauter) with swiveling +/- 90 ° and graduation +/- 3 arc seconds. In addition it runs with a tool changer with 48 positions and a HSK A63 tool holder. The table is a NC rotary table with a clamping surface of 3,500 x 835 mm and 7 T-slots. IKZ 70 bar, paper belt filter and chip conveyor (ejection height 1200mm) and 3D radio measuring probe come with the machine. The machine is prepared with a 4th axis interface. The condition of the machine is very good - it is still in production and maintenance service has been applied regularly according to manufacturers stand ...
Manufacturer: Matec Model/Type: 30 L Year of Manufacture: 2004 Power Requirements: - Voltage: 400V - Power Consumption: 62 kW Find more here - / Contact us at -
x-travel: 4000 mm y-travel: 600 mm z-travel: 800 mm control: Heidehain 430 Weight: / kg voltage: 400 V turning speeds: 9000 U/min max. table load: 2700 kg rapid traverse: 30 m/min feed: 30 m/min Cone: SK40 total power requirement: 48 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm Control: Heidenhain TNC 426 tool changer for ... units: 48 turning speeds: 9000 U/min feed: 3000 mm/min rapid traverse: 30 m/min total power requirement: 15 kW svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
