This 3-axis Bernardo Variomill FU 2000E Servo was manufactured in 2020. It features a table size of 2000 x 500 mm, spindle taper ISO 50, and a spindle speed range of 30 - 2050 rpm. The machine offers a maximum table load capacity of 1800 kg and includes rapid traverse rates up to 2200 mm/min in X/Y axes. Consider the opportunity to buy this Bernardo Variomill FU 2000E Servo vertical machining centre. Contact us for more information.
Horiz. Mitre band saw, double mitre band saw BERNARDO type MBS 315 DG-VR PROBandsaw for metalworking with swivelling saw bracket.New machine built in 2023Fabr. No. 20231800Sawing area at 90 Round 255 mmSawing area at 90 Square 255 x 255 mmSawing area at 90 Rectangle H160 x 310 mmSawing area at 45 Round 185 mmSawing area at 45 square 180 x 180 mmSawing area at 45 Rectangle H230 x 170 mmSawing area at 60 Round 115 mmSawing area at 60 Square 115 x 115 mmSawing area
Band width: 150mm; Band length: 2740mm; Veneer grinding device: no; Oscillation: yes; Roll diameter: 115 mm; Swivel grinding unit: yes / 90Â - 0Â; Work table: 900 x 305 mm; Additional table: 290 x 260 mm; Belt speed : 16 m/sec. m/sec.; Suction port: 100mm; Motor power: 3kW/400V; Machine length: 1540 mm; Machine width: 750 mm; Weight: 220 kg; Properties Oscillating abrasive belt ensures a high stock removal rate and a clean sanding pattern Large work table with integrated T-slot to accommodate the mitre stop Easy sanding belt change by means of a quick-release lever Spring-loaded belt tension, thus automatic compensation of belt length differences Infinitely swivelling grinding unit for vertical and horizontal grinding Graphite coating on the back wall of the sanding belt increases the sliding properties of the sanding belt Additional emergency stop on the sanding unit fo ...
Carriage length: 2500 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 90 mm; Pre-scorer: yes; Height adjustment of saw blade: manual; Saw blade swivel adjustment: manual; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 3150mm; Speeds: 4000 / 6000 rpm; Motor power: 5.5 kW; Extraction connection: 100 mm; Machine length: 2660mm; Machine width: 2000mm; Weight: 650 kg; The Classic 2500 C circular saw with swivel saw blade meets all the requirements of the modern trade and is the ideal machine for cost-conscious small and medium-sized businesses. Both the robust construction and the generous dimensioning of the machine offer the best working conditions when cutting solid wood or large panels, ...
Carriage length: 3200 mm; Cutting width at width stop: 1250 mm; Cutting width at cut-to-length fence: 2800 mm; Cutting depth: 90 mm; Pre-scorer: yes; Height adjustment of saw blade: manual; Saw blade swivel adjustment: manual; Adjustment of width stop: manual; Display Saw Blade Angle: Scala; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Saw blade diameter: 315mm; Speeds: 4000 / 6000 rpm; Motor power: 5.5 kW; Extraction connection: 100 mm; Machine length: 3300mm; Machine width: 2000mm; Weight: 650 kg; The Classic 3200 C circular saw with swivel saw blade meets all the requirements of the modern trade and is the ideal machine for cost-conscious small and medium-sized businesses. Both the robust construction and the generous dimensioning of the machine offer the best working conditions when cutting solid wood or large panels, a ...
sheet width: 2050 mm plate thickness: 4 mm pre-bending: 3,5 mm roll diameter: 150 mm engine output: 2,2 kW machine weight ab.: 1.550 kg dimensions: 3300 x 1100 x 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal flow rate: 2000 m³/h; Spahnsack volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; The powerful and mobile FT 200 N extraction unit improves the performance of your woodworking machines and helps you to keep the workplace free of chips and dust. During continuous operation, the powerful drive motor ensures a constant extraction performance High ease of use thanks to the quick-change system of the chip bags Scratch-resistant surface thanks to high-quality powder coating Steel fan impeller insensitive to the suction of small pieces of wood Modern design and optimal price-performance ratio filter bag chip bag driving device
power capacity: 0,75 kW degree: 45° Grad turning speeds: 10.000 U/min milling height: 4,0 mm motor: 400 Volt range L-W-H: 560 x 300 x 450 mm weight: 44,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 3,0 mm tube diameter: 60,0 mm motor: 230 Volt total power requirement: 1,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1,0 t throat: 95 mm table length: 120 mm table width: 120 mm total power requirement: manuell kW weight of the machine ca.: 17 kg. dimensions of the machine ca.: 270x130x330 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
through-put width: 580 mm working heigth: 615 mm discs: 570 x 260 mm Air consumption: 400 l/min. air pressure: 2,7 - 5,5 bar weight: 125 kg Box Width: 1200 mm Furnishing: - Working space: 1220 x 615 x 580 mm LxWxH - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 124 mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1.010 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
through-put width: 820 mm working heigth: 810 mm Air consumption: 680 l/min. air pressure: 8,6 bar weight: 160 kg : 148 Liter 0: Arm Loch 180 mm air clutch: 3/8 Zoll Furnishing: - Working space: 1110 x 820 x 810 mm LxWxH - very stable construction - Jet head (grain size 0.149 - 0.250 mm can be used) - Container for blasting material - dust extraction - foot switch - Lighting in the work area - Operating instructions in German - Transport dimensions / packed: 1350 x 1000 x 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 5,0 t throat: 215 mm workpiece height max.: 445 mm Mandrel diameter: 50 x 50 x 645 mm table plate: Ø 275 mm total power requirement: manuell kW weight of the machine ca.: 160 kg. dimensions of the machine ca.: 370 x 550 x 810 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
