Model
(Manufacturer: DECKEL)
Engraving Machine LID GK21 Work table: 350 x 200 mm Stencil table: 450 x 230 mm < > travel: 150 mm y travel: 300 mm z travel: 350 mm speed range: 475 to 9500 rpm motor: 0.07 / 0.07 55 kW 140 / 2790 rpm 380 V 3AC 50 Hz used, checked! Dimensions: 1200 x 1100 x 1550 mm
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 52185/08 Year of construction 1968 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stages Motor power 1.0 and 1.4 kW pole-switchable Mains connection 380 volts, 50 Hz - Feed in the X and Z axis - Two motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table coolant device in the machine foot - adjacent control cabinet counter holder with counter bearing for horizontal milling SK 40 Space requirement L x W x H 1200 x 1100 x 1600 mm Weight approx. 1000 kg Very good condition; used
Univ. swivel, tilt and turn table DECKEL suitable for FP 2L or FP 3L or FP 4L No. 2314-0301 Year of construction: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping grooves 16 mm, distance 90 mm - clamping plate horizontally rotatable to the right and left can be rotated up to 45 degrees- can be tilted from/to the machine +/- 15 degrees - swivel +/- 15 degrees permissible load max. 1000kg Weight: 400kg good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 2101 - 0778 Year of construction 1979 Travel paths manual X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps feed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchable mains connection 380 volts, 50 Hz - infinitely variable feed in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Vertical milling head swivel and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine foot - Electrical plan available , space requirement L x W x H 1350 x 1100 x 1700 mm , weight 770 kg , good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 2101 - 0875 Year of construction 1979 Travel paths manual X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps feed X and Y-axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable mains connection 380 volts, 50 Hz - infinitely variable feed in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Vertical milling head swivel and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray to be placed on the machine foot - Electrical diagram available Space requirement L x W x H 1350 x 1100 x 1700 mm Weight 770 kg Very good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 33064 Year of construction approx. 1960 Travel distances X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.1 and 1.4 kW Mains connection 380 volts, 50 Hz - Feed in the X and Y axes - Pinole shift on the vertical milling head - Fixed angle table - Coolant device with mechanical pump in the machine base - adjacent control cabinet with cable plug connection Space requirement L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine newly painted in the original shade of grey; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel distances X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 0.8 and 1.1 kW Pole switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axis - Coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm - Vertical milling head +/- 90 swivelling - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg Good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW Pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axis - Coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm - swivel, rotary and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used
Engraving milling machine DECKEL type G1L Pantograph, pantograph machine No.: 75021 Year of construction approx. 1970 Milling table 500 x 200 mm Stencil table 530 x 320 mm Spindle speed approx. 4000 - 15000 rpm 8 steps Gear ratio 1:1 to 1:50 infinitely adjustable Tool holder 4 mm Collet Motor power 0.85 kW Mains connection 380 volts, 50 Hz. - pantograph - letters and number sets - various burrs - mobile on fixed rollers - operating instructions - adjacent accessory cabinet L x W x H 600 x 380 x 800 mm space requirement engraving machine L x W x H 1000 x 700 x 1300 mm Weight engraving milling machine 270 kg Weight accessory cabinet 60 kg (with contents) good condition; used
CNC milling machine DECKEL type FP 3 A Colour No. 2206 - 0325 Year of construction 1980 CNC route control GRUNDIG CNC 2101 Travel distances X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm 21 steps Feed speed 5 - 500 mm/min. Stepless Rapid traverse speed 1200 mm/min. Motor power Spindle drive 2 / 4 kW pole-switchable Mains connection 380 volts, 50 Hz - CNC route control GRUNDIG CNC 2101 - mechanical handwheels for all three axes - universal swivel-tilt turntable - hydro-mechanical tool clamping - coolant device in the machine base - control cabinet adjacent (L x W = 600 x 430 mm)Space requirement L x W x H 1800 x 1700 x 1950 mm Weight approx. 2000 kg good condition; used
Univ. tool milling machine DECKEL type FP 1 Masch. Nr. 51265/08 Year of construction approx. 1967 Travel distances X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 stages Motor power 1.0 and 1.6 kW pole-switchable Mains connection 380 volts, 50 Hz feed rate in the X and Z axis - Spindle speed over 2 motor speeds and 8 gear stages - Pinol shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg Good condition; used
x-travel: 800 mm y-travel: 300 mm z-travel: 400 mm tool taper: SK 40 fixed table: 400 x 1000 mm addition table: 260 x 1000 mm turning speed range: 40 - 2000 U/min feed range: 10 - 500 mm/min total power requirement: 3 kW weight of the machine ca.: 2000 kg dimensions of the machine ca.: 1775/1880/1850 mm • fixed angle table, • 5 tool tapers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1200 mm y-travel: 400 mm z-travel: 400 mm total power requirement: 5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 3 x 2 x 2 m No. 4427 Universal tool milling machine DECKEL FP 4 L / 2707 Working area: 1200 x 400 Fixed angle table Control: 3-axis digital display Weight approx. 3.5 tons Space requirement 3 x 2 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour - 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5267: Universal tool milling machines Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm table-size: 440 x 1000 mm spindle taper ISO: 40 turning speed range: 40 - 2000 U/min feed range: 8 - 400 mm/min rapid traverse:: 1200 mm/min total power requirement: 2,2 kW weight of the machine ca.: 2,0 t dimensions of the machine ca.: 1,7 x 1,6 x 1,8 m Tool milling machine - 3-axis digital display - SK 40 tool holder - Long bed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable Mains connection 380 volts, 50 Hz - Infinitely variable feed in the X- and Z-axis - Spindle speed over 2 motor speeds and 8 gear stages - Quoil displacement on the vertical milling head 60 mm - Vertical milling head swivels and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition; used
x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm control: Dialog 11 turning speed range: 20 - 5000 U/min tool taper: SK 40 table surface area: 900 x 520 mm feed stepless: 2 - 4000 mm total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3,5 x 3,2 x 2,5 m Control: GRUNDIG CONTOUR 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table dimensions: 600-210 mm Spindle diameter: mm Weight: 750 kg : 2000 um x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm : ja : : 2 Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm digital readout: Heidenhain 3 Achsen spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min table-size: 650 x 375 mm weight of the machine ca.: 1,5 t dimensions: ca. mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engraving machine DECKEL GK21 work table: 350 x 200 mm stencil table: 500 x 300 mm x travel: 150 mm y travel: 300 mm z-travel: 350 mm speed range: 750 to 9500 rpm motor: 0.37 kW 1390 rpm 220 / 380 V 3AC 50 Hz with extensive accessories ! used, checked! Dimensions: 1350 x 1180 x 1610 mm
Engraving milling machine DECKEL type G1L Pantograph, pantograph Masch. Item no.: 75021 Year of construction approx. 1970 Milling table 500 x 200 mm Stencil table 530 x 320 mm Spindle speed approx. 4000 - 15000 rpm. 8 levels Gear ratio 1:1 to 1:50 infinitely adjustable Tool holder 4 mm Collet Motor power 0.85 kW Mains connection 380 volts, 50 Hz. - pantograph - letters and sets of numbers - various burrs - mobile on fixed rollers - operating instructions - adjacent accessory cabinet L x W x H 600 x 380 x 800 mm Space requirements Engraving milling machine L x W x H 1000 x 700 x 1300 mm Weight engraving milling machine 270 kg Weight accessory cabinet 60 kg (with contents) good condition; used
XY table, machine table, milling table DECKEL Working area: 400 x 400 mm for KF12 stroke: 50 / 50 mm plate thickness: 30 mm groove width: 12 / 21 mm used ! Dimensions: 560 x 440 x 125 mm
Clamping plate, clamping table, machine table, T-slot plate DECKEL Working area: 700 x 250 mm for KF12 plate thickness: 60 mm groove width: 12 / 21 mm used, tested ! Dimensions: 700 x 250 x 60 mm
Clamping plate, clamping table, machine table DECKEL Working area: 600 x 430 mm for KF12 plate thickness: 25 mm groove width: 12 / 21 mm used, tested ! Dimensions: 600 x 430 x 60 mm
CNC milling machine DECKEL type FP 3 A Fabr. No. 2206 - 0325 Year of construction 1980 CNC line control GRUNDIG CNC 2101 Travel X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle holder SK 40 Pinol stroke 100 mm Spindle speed 25 - 2500 rpm. 21 steps Feed speed 5 - 500 mm/min. infinitely variable rapid traverse speed 1200 mm /min. Motor power Spindle drive 2 / 4 kW pole switchable Mains connection 380 Volt, 50 Hz - CNC line control GRUNDIG CNC 2101 - mechanical handwheels for all three axes - Universal swivel-tilt-turntable - Hydro-mechanical tool clamping - Coolant device in the machine foot - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement L x W x H 1800 x 1700 x 1950 mm Weight approx. 2000 kg good condition; used
x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm Control: total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps spindle speed horizontal 60-1200 rpm. 12 steps Motor power 0.8 and 1.1 kW pole switchable Mains connection 380 volts, 50 Hz - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm- Vertical milling head +/- 90 pivotable - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg good condition; used
table length: 800 mm table width: 400 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm spindle stroke: 100 mm turning speeds: 40-2000 U/min Table area: 380x800 mm Feed: 10-500 mm/min Feed: 10-500 mm/min Rapid movement: 1500 mm/min spindle taper: ISO: 40 digital readout: Elesta total power requirement: 3 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,2x1,2x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
