Saw blade diameter: 450mm, stroke: 240mm, machine dimensions X/Y/Z: approx. 1000mm/1350mm/1900mm, weight: approx. 1200kg. Cutting range at 90°: round material: 150mm, flat material: 300mm/95mm, square material: 140mm/140mm. Cutting range at 45°: flat material: 210mm/95mm. Including roller conveyor and NC stopper. On-site inspection is possible.
miter: ja clamping: ja kW mechanical: Senkung weight of the machine ca.: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning speeds: 40/80 U/min : 0025 voltage: 380 V clamping: ja kW miter: ja weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm.
Saw blade diameter: 275mm, power: 1.9kW, speed: 80rpm, cutting range (flat): 140mm/70mm, cutting range (miter): 100mm/70mm, max. pipe cutting capacity: 3 inches, solid material cutting capacity: 80mm/60mm, square material cutting capacity: 50mm/50mm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1500mm, weight: approx. 300kg. On-site inspection is possible.
Saw blade diameter: 275mm, cutting range round (90°): 100mm, cutting range flat (90°): 160mm/80mm, speed: 40rpm - 80rpm. On-site inspection is possible.
Saw blade diameter: 350mm, speed: 3400rpm, cutting capacity at 90°: 120mm/75mm, cutting capacity at 45°: 90mm/65mm, machine dimensions X/Y/Z: approx. 700mm/900mm/1000mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
saw blade diameter: 275 mm cutting diameter: bis 90 mm cutting range flat: 120 x 75 mm turning speeds: 40/80 U/min miter cut: 45°/90°/-45° ° weight of the machine ca.: ca. 150 kg Manual saw blade feed Accessories: Coolant device Underframe with 2 drawers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mitre cold circular saw EISELE type VMS 300Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995Sawing range at 90 (round) 100 mmSawing range at 90 (flat) 120 x 80 mmSawing range at 45 (round) 90 mmSawing range at 45 (flat) 80 x 80 mmSaw blade diameter 300 mmSaw blade speed 40 / 80 rpm. 2 stepsMitre cut +45 to 90 to -30Engine power 1 and 1.2 kWNet connection 400 volts, 50 Hz- coolant device- mounted saw blade approx. 270 mmSpace requirement L x W x H 700 x 700 x 1600
Mitre Cold Circular Saw EISELE Type VMS-III-S-PVTyp No. 430 Fabr. No. 2371 Year of construction 1991Saw range at 90 (round) 120 mmSaw range at 90 (flat) 150 x 110 mmSaw range at 45 (round) 100 mmSaw range at 45 (flat) 120 x 100 mmSaw blade diameter 350 mmSaw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right, infinitely variableMotor power 2 and 2.6 kWNerg connection 380 volts, 50 Hz- two cutting speed levels over 2 motor speeds-
saw blade diameter: 315 mm cutting diameter: 90 mm stroke: mm turning speeds: 40/80 U/min total power requirement: 1,5 kW weight of the machine ca.: 650 Kg dimensions of the machine ca.: 0,9 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 275 mm cutting diameter: 80 mm stroke: mm turning speeds: 58 U/min total power requirement: 0,5 kW weight of the machine ca.: 70 Kg dimensions of the machine ca.: 0,5 x 0,5 x 0,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: mm cutting diameter: mm stroke: mm turning speeds: 10/20 U/min engine: 380 V / 12 A total power requirement: kW weight of the machine ca.: 1-100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 275 mm capacity 90 degrees: round: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 600 x 600 x 700 mm machine weight ab.: 198 kg power capacity: 1,4 / 1,9 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mitre Cold Circular Saw EISELE Type VMS 300 Mesh No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm Sawing range at 90 (flat) 120 x 80 mm Sawing range at 45 (round) 90 mm Sawing range at 45 (flat) 80 x 80 mm Saw blade diameter 300 mm Saw blade speed 40 / 80 rpm 2 stages Mitre cut +45 to 90 to -30 Motor power 1 and 1.2 kW Power supply 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm space required L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used
Mitre Cold Circular Saw EISELE Type VMS-III-S-PV Type No. 430 Colour No. 2371 Year of construction 1991 Saw range at 90 (round) 120 mm Sawing range at 90 (flat) 150 x 110 mm Sawing range at 45 (Round) 100 mm Sawing range at 45 (Flat) 120 x 100 mm Saw blade diameter 350 mm Saw blade speed 17 + 34 rpm. Mitre cut 45 to the left, 90 and up to 30(60) to the right infinitely variable motor power 2 and 2.6 kW mains connection 380 volts, 50 Hz - two cutting speed levels over 2 engine speeds - hydro-pneumatic saw slide lowering infinitely variable - pneumatic material clamping - saw carriage on very stable rectangular guide - electric coolant pump in the machine substructure space requirement L x W x H 1100 x 710 x 1850 mm Weight 460 kg good condition; used
saw blade diameter: 275 mm cutting diameter: 90 mm stroke: 120 mm mitter cutting - all-position: 90 - 30 ° turning speed range: 40 / 80 U/min voltage: 380 V total power requirement: 1,4 kW weight of the machine ca.: 290 kg dimensions of the machine ca.: 0,80 x 0,90 x 1,30 m - Fab.-No.: V25188 - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pivoting cross-cut and mitre saw Graule Eisele LMS II with roller support table for wood, aluminum and plastics., cutting height: about 120 mm, cutting width: approx. 80 mm, Roller conveyor length: 350 cm each
Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used
Pneumatic fitting shears or fitting punch Pressta Eisele BST for cutting and shortening fittings, straps and various other metal fittings. · Very good original condition., Max. fitting size approx.:: 17x7mm, stop length: 260 cm
saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: square: 140 mm capacity 45 degrees: flat: 280 x 30 mm turning speeds: 6 / 12 / 24 / 48 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 450/500 mm cutting diameter: mm stroke: mm total power requirement: 3,6 kW weight of the machine ca.: 1130 t dimensions of the machine ca.: m - Circular saw - semiautomatic - hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Circular Saw - Feed Unit Make EISELE Type SU 073Fabr. -No: 0739 built in 1988Max. Feed length: 920 mmBaking height: 65 mmOpening width of the vise: 200 mmDimensions: 1350 x 900 x 1150 mmWith- double repeating deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
cutting diameter: 440 mm weight of the machine ca.: 780 kg miter: feed: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
