FANUC Arc Mate 120iC/12L robotic welding station was built in 2016. This system enables fully automatic welding of workpieces using MIG/MAG and TIG methods. The machining process is performed by a reliable industrial robot, which, in combination with two positioners, enables the machining of parts with even the most complex shapes. The robotic welding station is fully complete and consists of the following components: – robot arm: FANUC Arc Mate 120iC/12L – controller: FANUC R-30iB – welding positioner: PEH 1-250 (2 pcs.) – welder: LINCOLN POWER WAVE S500 – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500/45 – cooling unit: LINCOLN COOLARC 50 – welding torch cleaning station: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN 4R100 AUTODRIVE – welding wire reel cassette – light curtains: SICK – operator’s panel (2 pcs.) – control cabinet – cover ...
Spindle speeds up to 10,000 rpm, High-pressure system through the spindle with 15 bar, Tool magazine with a capacity of 21 holders, Chip conveyor belt, X-axis movement 700 mm Y-axis movement 400 mm Z-axis movement 330 mm Max. weight of the workpiece 300 kg Table: Outer length 850 mm Outer width 410 mm The machine is energized.
Laser power: 3,000 watts Type: A04B-0820-B342 Weight system: 750 kg Dimensions LxWxH: 205 x 75 x 120 cm Equipped with: -Stabilizer - Fanuc Power Converter DTU60/2/0/5S - CNC control Fanuc Series 31i-LB
FANUC Arc Mate 100iC robotic welding station was built in 2019. The system configured for fully automatic MIG/MAG welding of workpieces is the perfect solution for the production of e.g. electrical cabinets, metal structures or agricultural equipment. The machining process is performed by a powerful industrial robot which, in combination with a rotary table, enables the machining of workpieces with even the most complex shapes. All the components of the workstation are integrated inside a single structure, making it easy to install or reposition. The MOTOFIL ROBOTICS MONOBLOC MCT1110 robotic welding station consists of the following parts: – robot arm: FANUC Arc Mate 100iC – controller: FANUC SYSTEM R-30iB – welding source: KEMPPI A7 MIG Power Source 450 – welding positioner – wire feeder: KEMPPI A7 MIG Wire Feeder 25-LH-EUR – ABICOR BINZEL torch cleaning device with ...
FANUC LR Mate 200i Automation Robot + Controller R-J2+ Handheld The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a wide range of manufacturing and system processes. The LR Mate 200's tabletop design allows it to be used in a wide range of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design wraps all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration when powered on. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end effector connector integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an ...
Table size: 850 x 410 mm X/Y/Z travels : 700/400/330 mm Rapid traverses rates (X/Y/Z): 54 m/min CNC: Fanuc 31i model B5 Tool magazine capacity : 21 Max. table load: 300kg Spindle speed range: 100-10000 rpm Distance btwn table & spindle nose (min./max.): 150-480 mm Noise level:
Key data: 7 KW, 1500 1/min
used, comes from a fully functional plant Model: aiI 12/7000 Type: A06B-1408-B103 Year of manufacture: 03/2006 S1 11 kW / 1500 - 6000 rpm / max. 54 A 7.5 kW / 7000 rpm S2 30min S3 60 15 kW / 1500 - 6000 rpm / max. 64 A 11 kW / 7000 rpm Space requirement LxWxH: 620 x 350 x 300 m
Fanuc R-J3iB control cabinet for R2000 robot Scope of delivery: only control cabinet as shown in pictures. No warranty because spare parts carrier. Used goods – normal signs of wear present, yet fully functional. More details and pictures on request. The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT.
Power: Maximum 1000 cycles per hour. hand-held programmer is not included. - Articulated robot with four axes of movement. - Output up to 550 cycles per hour - depending on load capacity - with a swivel range of 2x180° as standard. - Low space requirement - Compact in design, the Robogrip can also be accommodated in small areas and low halls. - Precise and product-friendly motion sequences -Wide range of applications - Packing, palletizing, sorting - The robot can be used for numerous different purposes. - The Robogrip also performs demanding combination tasks reliably and safely. - Individual equipment Numerous different gripping tools are available for the Robogrip. This makes it easy for you to put together your individual robot that meets your requirements one hundred percent. -Low maintenance The Robogrip is characterized by low maintenance requirements and high av ...
General: Year of construction 2008 Control System R-30iA Mate
FANUC M-710iC/70 robotic station for laser cutting and welding was built in 2017. The offered station is complete and includes the following components: – FANUC M-710iC industrial robot – IPG YLS-4000-S2T fibre laser source – FANUC SYSTEM R-30iB controller – 2-position rotary table with horizontal rotation – 2-axis L” type positioner – semi-automatic head changing system – HIGHYAG BIMO-FSC laser cutting head – IPG Photonics FLW-D30 Vertical oscillating laser welding head with HD camera – KLIMAWENT UFO-4-M/N-1/R filtering system – wire feeder (4 reels and equipment for 0.8 mm and 0.6 mm wire) – portable teach pendant FANUC A05B-2255-C101 – control system – metal construction with cabin Laser machining of workpieces is performed by a specially designed FANUC M-710iC/70 robot arm, distinguished by the best permissible load and inertia in its categ ...
Key data: 700 mm, 400 mm, 330 mm
Vertical CNC Machining Center/Drill Tapping Center CNC control Fanuc 16i-MB Table size 410 x 850 mm Table load 250 kg Number of pallets: 1 X-axis travel 700 mm Y-axis travel 400 mm Z-axis travel 330 mm 4. Axis (rotary table) 4+5 Spindle mount MAS BT 30 Spindle speed 10,000 rpm Magazine capacity 21 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.
FANUC ROBODRILL ALPHA D21 LiB5 CNC machining center manufactured in 2017 achieves outstanding efficiency and precision, even during the most demanding workpiece machining. The machine features an extremely stable design with a large working area, inside of which it incorporates, among others, a rotary table and an extremely powerful high-speed spindle. This is further complemented by the intuitive FANUC Series 31i-MODEL B5 CNC control, whose excellent optimisation and multitude of functions allow to maximise the efficiency of the machining process, while ensuring excellent results. To this date, the FANUC ROBODRILL CNC milling center has operated for a total of 1911 hours and has been used only for machining stainless steel. The total weight of the machine is 2200 kg. Technical specifications of the FANUC ROBODRILL ALPHA D21 LiB5 milling center - feeds in the X/Y/Z axis: 700/400/330 ...
Inv. Num. : 5559 Type: ARC Mate 100iB Producer: Fanuc Created: 2007 Parameters: Control system: FANUC SYSTEM R-30iA Duty cycle: 2000 h Maximum arm reach: 1373 mm Number of axles: 6 pieces Maximum load capacity: 6 kg Source: MIGATRONIC FLEX 4000 Nominal current: 7 A Accuracy: 0.08 mm Machine weight: 135 kg External Wire Feeder Cleaning station Base Control panel and control panel Simple table design
Inv. Num. : 4060 Type: ARC Mate 120iB Producer: FANUC Created: 2007 Parameters: Control System: R30iA Hours: 985 h Axles: 6 Payload: 20 kg H-reach: 1667 mm Repeatability: ± 0.0800 mm Source: Kempi – KEMPARC SYN300 Mains voltage: +-10%: 3x400 Power: 320 A Weight: 220 kg Accessories: Robot with 2 separate workstations: Danubius positioner and clamping table Dust extraction: POC 20 Table Metal Fence
Used industrial robot including control system in very good condition, Ready for immediate use Suitable for welding/spot welding, machine operation, material handling and much more. Payload: 120 kg Reach: 2413 mm Axles: 6 With its six axles, the Fanuc S-420F is capable of precisely moving heavy payloads of up to 120 kg. Due to the wide range of possible applications, there are practically no limits to the Fanuc S-420F. It offers consistent cycle times and handles heavy lifting, spot welding, and pick & place effortlessly. Absolutely professional machine from the market leader for automation FANUC - yet easy to use / program. Despite its large working area, the robot requires a comparatively compact footprint. The Fanuc S-420F RJ2 is designed for ground mounting and weighs a whopping 1600 kg. Movement Speeds: J1 90 °/s (1.57 rad/s) J2 90 °/s (1.57 rad/s) J3 90 ...
X,Y,Z Travel 700,400,330 mm Table size 850x410 mm Spindle speed 10000 rpm Number of tools 14 With 4th axis KITAGAWA rotary table Controller Fanuc 31i
Control Fanuc ... 31i - B5 Clamping table surface ... 850x410mm Axis X ... 700mm Axis Y ... 400mm Axis Z ... 330mm Spindle speed ... 0-24000/min. controlled axes ... 5 cooling ... 35bar Spindle mounting... BBT30. Rapid traverse ... 54m/min Main engine power ... 4.7/14.2kW Max. table load ... 300kg L x W x H ... 2100x2165x2800mm Machine weight ... 2300kg Magazine slots ... 21 + Robot FANUC LR Mate 200iD The machine is in good condition, possible to test under electricity.
Key data: 370 mm, 270 mm, 254 mm
Machine Details Stock-No. 1105-03942 Type of machine Wire Eroding Machine Make FANUC Type Robocut Alpha oid Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time to be agreed Freight basis ex site Price Technical details table length 700 mm table width 400 mm Control Fanuc 310 S WA X-Axis 520 mm y-axis 370 mm U-axis +/- 60 mm V-axis +/- 60 mm Conical angle (100mm) +/- 30° Z-Axis 410 mm max. workpiece sizes 600 x 420 mm max. workpiece height 400 mm max. workpiece weight 400 kg Rapid traverse 0.9 m/min interval size of the actuator 0,001 mm wire dia. 0.1 - 0.30 mm wire speed 0 - 15 m/min wire clamping 200 - 2.500 g total power requirement ~ 14 kVA weight of the machine approx. 2.5 t dimensions of the machine approx. 3.2 x 2.5 x 2.1 m Accessories Documents electr. Hand Wheel
Inv. Num. : 6191 Type: H 3000/1000/2 TIG 50 Producer: FANUC Created: 2021 Parameters: Parameter: Industrial robot FANUC ARC MATE 100iD 8L with a reach of 2032 mm 2x single-axis positioner with FANUC counter bearing, load capacity 1000 kg REER safety light barriers Welding source TIG Migatronic 500 A Welding bundle and torch ABICOR-BINZEL 500 A (water-cooled) TIG IT Software Automatic Path Correction Electrode search
Key data: 500 mm, 400 mm, 330 mm
achine details Stock-No. 1105-03933 Type of machine Machining Center - Vertical Make FANUC-STAMA Type Robodrill T14 ifb Year of manufacture 2010 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time by arrangement Freight basis EX WORK Technical details x-travel 500 mm y-travel 400 mm Z-Travel 330 mm table surface area 650 x400 mm turning speed range - milling 10000 rpm power capacity - milling spindle 7,5 kW tool taper BT 30 No. of tools in the magazine 14 pieces feed range 1-12000 mm/min rapid motion -longitudinal/cross/vertical 36 m/min total power requirement 10 kW Weight of the machine approx. 2200 kg dimensions of the machine approx. 2000x2400x2600 mm Additional information CNC FANUC 31 i MB 10000 rpm spindle
FANUC Arc Mate 100iC robotic welding machine manufactured in 2014, is designed for welding workpieces with even the most complex shapes. The FANUC robotic welding system is equipped with: – robotic arm: FANUC Arc Mate 100iC (2 units) – 3-axis manipulator: PEHh-3-450 – controller: FANUC SYSTEM R-30iB – welding source: LINCOLN ELECTRIC Power Wave S350 (2 units) – light curtains – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500 (2 pcs.) – torch cleaning device: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN ELECTRIC 4R100 (2 pcs.) – wire reel cassette with clamping system (2 pcs.) – operator’s panel – water cooler: LINCOLN ELECTRIC COOLARC-50 (2 pcs.) – control cabinet – attaching fixtures (2 pcs.) – strain relief hanger and cable relief (2 pcs.) – covers with service door and lock with safety switch – platform (2 pcs.) In order to ...
Robot cell for leak testing consisting of: Robot FANUC LR Mate 200iC/5L – 2008, Table for measurements, equipped with 8 light curtains, 2 Innomatec devices for leak testing, type LTC – 502. The cell has a safety system and CE
Robot Fanuc LR Mate 200iB R-J3iB Control R-J3iB Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 717mm radius Year of construction: 2003
Robot Fanuc LR Mate 200iC/5L R30iA Control: R30iA Year:11/07 Number of axes: 6 Max. payload: 5Kg Max. working range: approx. 892 mm Scope of delivery : Robot,Control,Cable,Teach Panel
Robot Fanuc Arc Mate 100i Control: R-J3 Number of axes: 6 Year of construction: 1999 Max. payload: 6 kg Max. working range: approx. 1368 mm Scope of delivery : Robot, controller, cables, teach panel, instruction manual, wiring diagrams
FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis: ...
