Pile Cutting Machine, Pile Cutter, Face Cutter SCHNEIDER Type Senator 155Rubber, Paper and Veneer ScissorsMasch. No. 60178 Year of construction 1968Cutting length 1550 mmCutting thickness approx. 125 mmInsert height 140 mmBack gauge max. 1550 mmMotor power Knife drive 5.5 kWNeching connection 380 volts, 50 Hz- 2-hand operation for stroke release- automatic pressing by hold-down presses the stack of paper onto the table- Manual hold-down and stroke release via foot switch (works)- Kickback (back gauge) up to
max. envelope size: 36 x 36 cm max. speed: 15000 /h Envelope feeder Schneider SF-80 Can be used on single-sheet or stream feeders Format max. 360 x 360 mm Format min. 100 x 100 mm Speed max. up to 15,000 cycles/hour Incl. height-adjustable delivery belt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981
Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981
A table milling machine with two spindles or twin milling machine from Schneider type SH/D2 including feed and accessories. The double spindle allows two work steps to be carried out in one pass without changing tools. Speed: 3,000 / 4,000 / 6,000 / 8,000 / 10,000 rpm, table size: 1,900 x 850 mm, Spindle ø: 30 mm, clamping length: 125 mm, Right spindle: Pivotable
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tenon cutting and slotting machine Schneider type SK-Z 2 for cutting, sawing and milling tenons and slots in the Woodworking., milling motor: 9,2 kW, table size: 1,120 x 450mm
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressure power: 10 bar Pressure power: 960 l/min. tank: 500 l cylinder: 1 St. output: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Motor output: 4 kW Weight: 190 kg Receiver: 270 L Effective free air delivery: 520 L/min : 650 L/min Max. pressure: 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully equipped line with: Lift, Jogger and Stacker.
Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Application height 140 mm Backgauge max. 1550 mm Motor power Knife drive 5.5 kW Mains connection 380 volts, 50 Hz - 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control - Backgauge adjustment via servo motor (motor and control has been retrofitted) Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used
Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981
Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981
Suction: 250 l/min. Filling capacity: 150 l/min On / switch-off: 10 bar container volume: 50 l turning speeds: 2.850 U/min Sound power level: 95 dB total power requirement: 1,8 kW dimensions: 910x470x780 mm weight: 38 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suction: 410 l/min. Filling capacity: 295 l/min On / switch-off: 8/10 bar Heads / stages: 2/1 container volume: 50 l voltage: 230 V / 50 Hz engine output: 2,2 kW turning speeds: 1000 U/min Sound power level: 97 dB dimensions: 950 x 410 x 875 mm weight: 64 kg - easy to move thanks to castors and long grill - mobile, V-belt driven piston compressor - Compressor for work up to 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 bar : 660 l/min. : 520 l/min. turning speeds: 1000 U/min container volume: 90 l power capacity: 4 kW voltage: 400 V weight: 102 kg dimensions: 1110x495x1015 mm - Mobile piston compressor with horizontal tank - Compressed air tank equipped with safety valve, container pressure gauge and condensate drain valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 bar : 510 l/min. : 390 l/min. turning speeds: 1240 U/min container volume: 90 l power capacity: 3 kW voltage: 400 V weight: 80 kg dimensions: 1100x495x895 mm - Mobile piston compressor with horizontal tank - Compressed air tank equipped with safety valve, container pressure gauge and condensate drain valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
