442 WMW used machine for sale

MAX DIAM 250 X 2000

MAX CAPASITY 63 T, DIAMETER ROLLING 110

Sell a used cylindrical grinding machine from WMW model SU 125x200. The machine ran until it was dismantled in production. The dimensions of the machine are LxWxH 1300mm x 2100mm x 1400mm. The weight is 2500kg. Incl. coolant device and operating instructions. As shown in the photos. If you have any further questions, please contact us. The machine can be viewed by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. The return is excluded. All information without guarantee.

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

MAX DIAM 200

MAX DIAM 250 MAX LENGHT 800

ROLL DIAMETER 70

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Bevel gear generator ZFTKK 500/3V

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Key data: 160 t

Inv. Num. : 8057 Type: PYE 160 Producer: WMW Generated: Parameters: Compressive force: 160 t Total power requirement: 7.5 kW Ram stroke: 500 mm Machine weight: 6000 kg

Approx. 1750 mm long Eccentric approx. 290 mm Comes from 160 to Presse

I am offering Thread rolling machine WMW UPW 12,5.1 after full overhaul. Machine has new hydraulic pump. All electrical motors were recycled. New electrical system was installed on machine. The chain and oil in the variator were changed. The condition of machine is absolutely perfect. Technical data: - Minimum / maximum diameter of the rolled detail: 3/100 mm; - Maximum rolled thread pitch: 4 mm; - Maximum rolled pitch with notched teeth: 1.6 mm; - Maximum rolled length of the thread made by the plunge method: 125 mm; - Maximum rolled length of the thread made longitudinally: 2000 mm; - Minimum / maximum distance of rolling spindles, including stroke: 130/240 mm; - Height of rolling spindles above the machine bed: 160 mm; - Maximum diameter of rolling tools: 195 mm; - Diameter of rolling spindles: 63 mm; - Rolling force infinitely adjustable: from 0 to 12500 kg; - Rolling sp ...

I am offering Thread rolling machine WMW UPW 25 x 100 after full overhaul. New electrical system with Schneider electric components was installed(full documentation and schematics). Machine has a new hydraulic pump, valves and distributor. All electrical motors were electrical checked and all bearings were changed. All bearings of the clutch were changed. Bj77Rbchcjg The chain and oil in the variator were changed. The condition of the machine is absolutely perfect. Model: UPW 25.1 Pressure:25 t Workpiece diameter min/max:10/100 mm

Cylindrical grinding machine WMW SA5x630 incl. plenty of accessories -Tip width 630mm -Tip height 140mm -Measuring equipment -Grinding wheel puller device -Coolant device -Work light -Extensive range of grinding wheels and grinding wheel flanges Hxgasfso -Documentation Dimensions: LxWxH 3x2x2 meters / Weight 4000Kg

Thread milling machine GFL400-2000 with change gears

HBM BF80

MAX CAPASITY 25 TONS

Key data: 250 mm, 1 t, 1200 mm

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Inv. Num. : 7595 Type: UPW 12.5x70 Producer: WMW Created: 1964 Parameters: Power consumption: 5 kW Max. thread diameter: 70 mm Maximum power: 12.5 t Machine weight: 1900 kg

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Key data: 63 1/min, 25 mm, 200 mm

Manufacturer: WMW Type: BKR 25 x 4 AI Stock number: 1023 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 25 mm Morse taper of spindle: MK 4 Connected load: 10.2 kW Weight: 3000 kg

Key data: 63 1/min, 32 mm, 200 mm

Manufacturer: WMW Type: BKR 32 x 4 AI Stock number: 1022 Number of Spindles: 4 Spindle spacing: 475 mm Table working surface: 450 mm x 1900 mm Drilling capacity in steel: 32 mm Greatest distance between table and spindle: 710 mm Table surface: Morse taper of spindle: MK 4 Drilling spindle stroke: 200 mm Connected load: 12.4 kW Weight: 3080 kg

max diam 670 , max modul 12

Gearwheel Shaping machine WMW Modul ZSTTK 1250x24

Key data: 355 mm, 1600 mm, 355 mm

Manufacturer | Manufacturer: WMW Type | Type: DLZ 355 x 1600 Stock number | Stock Number: 1009 Turning Length | Turning length: 1600 mm Circumferential diameter over bed | Swing diameter over bed: 355 mm Spindle bore | Spindle bore: 35 mm Tip Height | Center height: 180 mm RPM | turning speed: 112 - 2500 rpm Engine Power | Drive power: 5.5 kW Weight Machine | Weight of machine: 2,2 t

Manufacturer: WMW Type: ZFWZ 500 x 5 Stock number: 1010 Wheel diameter - max.: 500 mm Wheel width: 180 mm Module - max. 5 Module - min. 0.5 Total power requirement 3.5 kW Machine weight approx. 1950 kg Table bore: MK 5 Distance between milling cutter and workpiece 10 - 200 mm Speed range: 50 - 200 rpm Table diameter: Ø 250 mm Control: conventional

Grinding lenght 6000 mm Grinding diameter 1050 mm

Horizontal Bracket Milling Machine Universal milling machine WMW Heckert FU 250 x 1000 • Table LxW: 1,250 x 335 mm • Spindle: 28 – 2800 rpm • Tool holder: SK 40 • Rapid traverse in: X-Y-Z • 3-axis digital display • Coolant device • Task lighting • Connected load 6 kW • Accessories: according to picture • Dimensions: L x W x H.: 1800 x 1600 x 1900 mm • Weight: 1,700 kg Good condition flawless operation Currently still with 400V collar plug -> will be converted to CEE plug on request Includes a wide range of accessories A function video can be sent via WhatsApp. The machine can be viewed in our showrooms at any time. You are very welcome - metalworking machines and accessories on more than 1000 square meters On-site loading with forklift no problem

Key data: 690 mm, 400 mm, 500 mm

Universal milling machine from WMW, type FW Good general condition Mechanically flawless function Milling Machine - Horizontal Make:WMW Fritz Heckert Type: FW 250x1000/2 Year of construction: approx. 1980 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2,800 net free loading Technical details: x-travel: 690 mm Y-travel: 400 mm z-travel: 500 mm Table Mounting Surface:: 1250x250 max. table load: 1500 kg Spindle speeds:: 18 steps/step 55-2800 rpm Height above floor: 1350 mm Feed rate: 10-630 infinitely variable m/min Tool holder: SK40 Total power requirement: 6.3 kW Machine weight approx.: 2.0 t Machine dimensions LxWxH: L:1.8xW:1.7xH:2.0 m The work table can also be adjusted manually. The projection of the counter-holder boom = 500mm, the total length = 1050mm. with end pos ...