Model
(Manufacturer: WMW)
C-frame Stand-up Press WMW Power: 3 tone Mounting height: 355 mm Stroke: 280 mm Stumbling speed: 0.1 m/sec. Machine Weight: 400 kg Country of origin Germany
Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW
Internal circular grinding machine with plan grinding equipment, second-hand internal and face grinding machine, used Type / type: SI 6/1 x 315 Manufacturer / make: WMW Year / year of make: 1983 schleifbarer the protection of workpiece diameter / grinding diameter: inner / internal 20... 400 mm; outside / external 500 mm maximum workpiece diameter workpiece protection /. maximum diameter of work piece: 500 mm Max grinding depth / maximum grinding length: 315 mm schleifbarer angle of cone / cone grinding: 60 ° Internal grinding motor power / power drive motor grinding of internal: 7,5 kW Internal grinding spindle speeds / rev's of internal grinding spindle: 2640... 16500 RPM Power cylindrical grinding device / power drive of face grinding attachment: 4 kW Power work-piece motor / power drive of workpiece engine: 1.5 kW Workpiece spindle speeds / rev's piece of work s ...
Band width 250 mm, stuffenlos adjustable speed Btto 600 kg
+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...
see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
We can offer several thread rolling machines with cylindrical dies, any size.
Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t
Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used
Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t
max. load: - kg : - weight: - kg 10 off used machine shoes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: für Stangen und ... : für dickwandige Rohre working area: 30 - 80 mm Ø main drive: 38 kW : Ein- und Auslauf total wight: 12 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.
Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible.
Table size X/Y: 630mm/345mm, table clamping surface X/Y: 700mm/300mm, travel X/Y/Z: 400mm/250mm/300mm, spindle mount: SK40, speed: 2240rpm, feed X/Y/Z: 1250mm/min, distance spindle-table: 400mm, quill stroke: 80mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/2650mm/2300mm, weight: approx. 1700kg. On-site inspection is possible.
Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.
Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.
Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.
Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.
Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.
grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50
bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm
