Model
(Manufacturer: OKUMA)
OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...
Very nice, well-maintained CNC lathe with a lot of accessories. Bar Feeder Multi 3000 (samsys) Tip wide: 500, W-520mm, ATC 12, Spindle: 45 - 4500rpm,
Control: OSP-P 300S X-axis: 690 mm Y-axis with stroke: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80-fold Equipment: - Collision avoidance system - Tool monitoring system - Tool measuring device - Tool calibration - Sub-spindle with tailstock function - Renishaw touch probe - Door automation - NC bezel support with bezel SMW SLU-Z 3.2 - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022
OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...
Inv. Num. : 8325 Type: LU 25-M Producer: OKUMA Generated: Parameters: Max. turning diameter: 420 mm Maximum feed in the Z-axis: 1250 mm Maximum spindle speed: 3500 1/min Spindle bore: 72 mm Tool magazine: 12 10 pieces Length: 4500 mm Width: 3000 mm Height: 2200 mm Weight: 7300 kg Equipment: Conveyor C-axis Tailstock Powered tools Tool probe Oil mist extraction
Inv. Num. : 8324 Type: LU 15-M Producer: OKUMA Generated: Parameters: Maximum turning length: 350 mm Max. turning diameter: 340 mm Maximum turning diameter over bed: 530 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Number of Stacking Positions: 12 10 Equipment: Conveyor Powered tools Axis C Tool probe Oil mist extraction
Swing Over Bed .. 20.87 Swing Over Saddle ... 16.14 Distance Between Centers 39.37 Max Turning Diameter 13.39 Max Working Length .. 39.37 Axis Travel: XA10.24 ZA40.00 XB 5.51 ZB38.00 C Axis .. 360 Degree Spindle Speeds .. 38 ~ 3,800 RPM Speed Ranges Infinitely Variable X Auto Range Nose . Option A2-8 Big Bore Bore Diameter ... 3.14 Turret Upper Multitasking ... V-12 NC Turret Lower ... V8 (VDI) Indexing Time Non-Lift .. 0.18 Sec Live Tool Speeds 45 ~ 4,500 RPM Feedrates X/Z/C . 787/984/200 Tailstock Quill Diameter 3.54 Quill Bore Taper MT#5 Quill Travel 4.72 Main Drive Motor ... 30-HP 304 Ft-LB Torque Live Tool Motor . 9.5 HP Machine Weight .. 19,360 LBS Equipped With: Okuma OSP-200LA With Machining Navi L-G Spare M-Codes, 4-Sets Pitch Error Compensation Feed Hold During Threading Thread Start Point Offset Helical Cutting Spindle Synchronized T ...
Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar
Key data: 420 mm, 1250 mm
OSP100L Chuck 15 102mm hole through chuck Chipconveyor Some toolholders
CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package
Key data: 600 mm, 460 mm, 460 mm
Control: OSP-E100M Travel: X-axis: 600 mm Y-axis: 460 mm Z-axis: 460 mm Max. workpiece weight: 500 kg Clamping surface: 1,000 x 460 mm Mount: SK 40 DIN ISO 69871 Tool magazine: 32 – compartment Spindle speed: max. 15,000 rpm Accessories - IKZ / Interior cooling -Conveyor - USB drive
CNC lathe Okuma LB 300- M OSP-U100L Turning length: 500 mm Turning diameter: 500 mm Speed: 3,200 rpm Tool turret 12 places (driven) Tool holder: VDI 40 Spindle passage: 135 / 100 mm Equipment: -Conveyor - Preparation for bar loading magazine - Automatic door - Touchsetter - OneTouch IGF - Forkardt Chuck 3QLCKS 315-135 - A large number of jaws
Control: OSP 7000 X-axis travel 5,000 mm Y-axis travel 3,700 mm Z-axis travel 800 mm Working area 2,500 mm x 5,000mm Max. load of the table 33 tons Tool holder SK 50 MASBT Accessories: Attachment head – exchange station (AAC) Straight attachment head 5-axis attachment head Automatic tool length measurement Glass scales in X, Y and Z axes Tool changer with 50 magazine slots Cooling water tank Conveyor Machine weight: 56 tons
Key data: 1000 , 900 , 1000
CNC controller: P 200 Axes X-axis travel mm: 1.000 Y-axis travel mm: 900 Z-axis travel mm: 1.000 Rapid traverse m/min: 60 Distance spindle nose - table surface mm: 70-1.070 Feed rates m/min: 60 DISTANCIA ENTRE CENTRO HUSILLO - SUPERFICIE de la MESA : 50 - 950 PRECISIÓN DE POSICIONAMIENTO EJES X Y Z (mm): 0,004 Worktable Number of pallets: 2 Table dimensions mm: 1.000 X 1.000 Tiempo indexacion palet (90º - 180º): 2,0 - 3,0 APC time s: 7 División estandar Grados: 1º Motor de accionamiento mesa KW: 1,9 Spindle Spindle speed rpm: 6.000 Spindle torque Nm: 606 Tool system Tool holder: BT-50 Tool magazine slots: 100 Max. Tool Diameter: 140 With occupied neighboring places mm: 100 Max. Tool Length mm: 450 Max tool weight kg: 25 Tool-to-tool time s: 1.9 Chip-to-chip time s: 4.4 Equipment Chip conveyor Rigid table with integrated rotary table Air or water throu ...
Control: OSP P200M Travel: X-axis 1,000 mm Y-axis 900 mm Z-axis 1,000 mm Pallet size: 630 x 630 mm Recording: MAS BT 50 Tool magazine: 200-fold Spindle speed: 6,000 rpm Accessories - 3D probes - Table button - Internal coolant supply - 2 compartment pallet changer -Conveyor - Coolant system
Control: OSP P200M Travel: X-axis 1,000 mm Y-axis 900 mm Z-axis 1,000 mm Pallet size: 630 x 630 mm Recording: MAS BT 50 Tool magazine: 200-fold Spindle speed: 6,000 rpm Accessories - 3D probes - Table button - Internal coolant supply - 2 compartment pallet changer -Conveyor - Coolant system
Key data: 300 mm, 1 mm
Control: OSP-P300L-R Turning length 1,000 mm Turning diameter 300 mm Spindle Passage 68 mm Turret: 12 seats – all powered Speed: 45 – 4,500 rpm Tool holder: VDI 40 Travel: X-axis: 235 mm Z-axis: 1,144 mm Accessories/Equipment -Conveyor - Chuck Ø 250 mm - Touchsetter -Tailstock -Coolant pump
Key data: 300 mm, 1 mm
Control: OSP-P300L-R Turning length 1,000 mm Turning diameter 300 mm Spindle Passage 68 mm Turret: 12 seats – all powered Speed: 45 – 4,500 rpm Tool holder: VDI 40 Travel: X-axis: 235 mm Z-axis: 1,144 mm Accessories/Equipment -Conveyor - Chuck Ø 250 mm - Touchsetter -Tailstock -Coolant pump
Key data: 340 mm, 950 mm
Manufacturer : Okuma Type : LB 3000 EX MY C 1000 Control : OSP P 300 L IGF Advance Year of construction : 2014 Duty cycle hours : approx. 18500 h Spindle hours : approx. 5000 h Availability : direct from location Specifications Turning diameter over bed: 580mm Max. turning diameter: 340mm Max. Workpiece length: 950mm Travel: X: 260mm, Z: 1,000mm Y: 120mm (+70/-50mm) C-axis: 360°/0.001° Spindle speed: 4,200 rpm Drive power: 22 kW Driven tool stations : 12 positions Driven tool stations Speed: 45–6,000 rpm Tool System : BMT 60 Okuma Weight: 6,600 kg • Dimensions L xWxH: 4,300x 2,041 x 2,444 mm Other equipment Mayfran chip conveyor NC tailstock Touch Setter tool preset Hydraulic 3-jaw chuck Röhm Duro NCCB 260/3 various tool holders not defined All prices are net plus VAT. VAT We expressly reserve the ...
OKUMA Multus B300-W Milling Turning Center TECHNICAL FEATURES: NC Type: OSP-P200L Distance between points: 900 [mm] Maximum diameter Turning Rate: 630 [mm] Permissible diameter above carriage: 630 [mm] Diameter allowed above the bench: 630 [mm] X-axis travel: 580 [mm] Y-axis travel: -80 / +80 [mm] Z-axis travel: 935 [mm] W-axis stroke: 1000 [mm] B-axis travel: -30 / +195 [°] B-axis indexing accuracy: 0.001 [°] Maximum rotational speed Milling spindle: 6000 [rpm] Milling Spindle Tool Attachment: HSK-A63 Maximum power Milling spindle: 11 [kW] Maximum torque Milling spindle: 65.7 [Nm] Tool magazine capacity: 60 Maximum length Tool Size: 300 [mm] Maximum diameter Tool Size: 130 [mm] Maximum weight per tool: 10 [Kg] X-axis fast feed speed: 40000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 26000 [mm/min] W axis fast feed speed: 20000 [m ...
Control: OSP-P300L Max. turning length: 1,250 mm Max. turning diameter: 420 / 310 mm Max. turning Ø over slide: 500 mm max. turning Ø over bed: 695 mm Max. speed: 3,000 rpm Tool holder: BMT 60 2 Tool Turrets A-turret: 12 tool positions (all driven) B-turret: 10 tool positions (all driven) Tailstock Conveyor 3-jaw chuck Touchsetter Reinforced coolant pump 8 bar Preparation of hydraulic bezel on lower turret
Top maintained and immediately ready for use. Okuma Space Turn LB300-M For purchases made until 01.12.2024, we can grant a 10% discount.
Key data: 150 mm, 350 mm
Machine Type: CNC Lathe Manufacturer: OKUMA Type: LB9 Control: OSP 500L-G Machine Status: Used Machine Delivery time: in stock Despite its age, this lathe is in very good optical and technical condition. Due to the very good machine equipment, the machine fits into many productions with its small space requirement. The machine has been thoroughly checked, checked, remeasured and is fully ready for production. Machinery -Conveyor - Turret direct mount -Tailstock - Touch-Setter - Dialogue programming Technical details - Number of controlled axes: 2 - Max. turning diameter: Ø 150 - Max. turning length (tailstock version): mm approx. 350 - Speed range of the main spindle: 1/min 150- 5,000 - Path facing slide (X-axis): mm 120 - Path bed carriage (Z-axis): mm 300 - Rapid traverse (X/Z): mm/min. 12,000 / 18,000 - Drive power: kW X=1 / Z=1.5 - Tool turret – number ...
Key data: 340 mm, 1000 mm
Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: immediately in stock ! Long turning length-1000 mm ! Towable Tailstock – Automatic G152 ! Partial hollow clamping device Machinery - Spindle motor VAC built 22/15 kW - Long turning length – 1000 mm - Towable tailstock – automatic G152 - 3-jaw chuck Forkardt, diameter 250 mm - Bezel preparation B-revolver - Partial hollow clamping device - Dialogue IGF - K-pump - Tool breakage / wear control -Conveyor Specifications - Max. turning diameter: 340 mm - Max. turning length: 1000 mm - X-axis travel: upper 260 mm (170+90); Lower 140 mm (90+50) - Travel Z-axis: upper 1,040 mm ; Lower 1.015 mm - Travel C-axis: 360° - Spindle – number of speeds: 2 – automatic - Bore diameter: 62 mm - A-turret (upper): 12 tools, all M- ...
Control: OSP-P200L max. turning diameter 550 mm max. turning length 600 mm Hollow spindle passage: 90 mm Spindle speed 3,200 rpm Main spindle: 30 kW A-turret: 12 seats (all driven) B-turret: 10 seats Tool holder: VDI 50 Accessories Schunk Chuck NC Rota 500 Chip conveyor Interlit Tailstock towable incl. external coolant system Door automation Touch Setter
Vertical machining center Manufacturer: Okuma Model No.: MC-4-VA CNC Control: OSP 5020M - Table dimensions: 1000 x 510 mm. - Maximum weight on the table: 500 kg. - Maximum weight on the table near the floor: 750 kg. - Longitudinal travel (X-axis): 650 mm. - Transverse travel (Y-axis): 410 mm. - Vertical travel (Z-axis): 450 mm. - Distance from the end of the spindle to the table: 200 mm. - Center distance to the column axis: 460 mm.
Key data: 340 mm, 600 mm, 3500 1/min
For sale Okuma CNC lathe type LR-15 with OSP control / Still under power to see. In good condition
Key data: 340 mm, 1020 mm, 3000 1/min
Okuma Genos L300E-MY CNC lathe with Y-axis and driven tools CNC Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle speed 25 - 3,000 rpm Spindle motor 15/11 kW X-axis travel 235 mm Y-axis travel +50 / -50 mm Travel Z-axis 1074 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Spindle speed driven tools 45 - 4500 rpm Number of driven tools 12 x Tool cone VDI Bar Feeder Irco-Breuning LNS Alpha SL 65S If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
Key data: 700 mm, 900 mm, 780 mm
For sale is an Okuma MA 500 HB from 2005. The machine is currently still in use and can be viewed under power (until the end of August 2024). More information on request.
Dear Ladies and Gentlemen, We have the following machine to offer: OKUMA EUROCENTER V50 Year of Make: 2002 Control: OSP U10M Machine hours (spindle running time): 18,074 Without vises and chuck
