We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Offer 26247 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Smallest bending radius 1.25 x sheet thickness - Smallest inboard height 6 x sheet thickness - Automatic follow-up control for a complete workflow - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 80 mm - Upper bolster drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - various bending rails, - Honeysuckle tool divided approx. 1900 mm - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg
used RAS double folding machine, the RAS XXL-Center 75.06 is a Automatic swivel bending centre for the efficient production of long roof, wall and façade profiles, which independently pull in sheet metal, position it and move it upwards bends at the bottom. Thanks to automated processes, simple programming via Bendex and optional cutting module, it enables an economical One-man operation with reduced personnel costs and high productivity. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (max.) 750 mm Back gauge (min.) 6.5 mm Colour grey/yellow Total power requirement 3 kW Dimensions 9,400 x 3,000 mm Weight 12500 kg Roller scissors none Bending angle (max) 300 deg ...
used RAS beading and flanging machine, foot switch, without rollers with the following equipment: - 7" touch controls - Learning function - Right-left run - UnLock security feature - Program management Machine is checked by a specialist, cleaned and is then fully functional. Test run is carried out. Sheet thickness max. steel/thickness 1.75 mm Throat depth 255 mm Farbe/Colour grau/gelb Total power requirement/electric power 1.5 kW Weight/Weight 60 kg Dimensionsf/Space requirement 1200 x 800 x 1600 mm Roller center distance 63 mm Voltage 230 V
used RAS channel folding machine, with seal set, auto-pilot Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Sheet thickness max. steel 0.5 - 1.0 mm Smallest duct cross-section 100 x 100 mm Throughput speed approx. 15 m/min Support height up to approx. 700 mm Support length inlet/outlet approx. 1500 mm Support Arms 2 x 3 Working height approx. 800 mm Machine length approx. 5350 mm Machine width approx. 1000 mm Weight approx. 710 kg Drive power max. 5.5 kW Machine number 8826
Offer 26238 Technical data: - Max. working width 3190 mm - Max. material thickness at 40 kg/mm², strength 6.3 mm - Cutting angle 1.2 ° - CNC - Cutting gap adjustment - Strokes 30 to 64 1/min - Stand projection 100 mm - Table height approx. 800 mm - Number of hold-downs 16 pcs - Back gauge 5 - 1000 mm - 3 pieces front support arms 1500 mm - E – Footswitch - Rear tilting roller table - Drive 400 V / 18.5 kW - Space requirement approx. W 3900 x H 1800 x D 2100 mm - Weight approx. 6800 kg - with : - CNC control RAS system - Rear tilting roller table / sheet metal hold-up - Rollable material collection container - Electronic rear space protection / light barrier
used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10
Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Motor-controlled back gauge with folding cams up to 1500 mm Multiple program sequences with different bending angles and lifting heights possible Multibend 2000 controller Bending rail ground Weight: 1,700 kg
Offer 26153 Technical data: - Max. projection 200 mm - Roller center distance 50 mm - Max. material thickness at 40 kg/mm² strength 1.25 mm - Space requirement approx. W 300 x H 1150 x D 500 mm - Weight approx. 25 kg - Various corrugated rollers
Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual back gauge up to 550 mm side stop and table extensions Knife sharpened 1600 kg
Large working width: 4000 mm for sheet metal with a strength of 40 kg up to: 3 mm Table width: 470 mm Back gauge adjustment: 1000 mm Fixed cutting angle: 1°30' Column projection: 200 mm Hydraulic drive: 380 V, 7.5 kW Space requirement: 4650 x 1830 x 1420 mm high Weight: 5.7 t
Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg
Working lenght 2540 mm Material thickness max (400 N/mm²) 2.5 mm Upper beam upstroke max 280 mm Gauging system (rectangular) 6-1550 mm Gauging system (T-shape) 6-3050 mm
used RAS 62.30 folding machine TurboBendPlus, a proven and reliable machine for professional sheet metal processing on roofs, walls and façade. The machine is ideal for tinsmiths, roofers, plumbers, locksmiths and metalworkers who rely on precise work results, robust technology and economic work. The RAS 62.30 impresses with its robust design and the high quality of the manufacturer RAS. It is ideally suited for everyday use Use in the trade and in the workshop. Used machines of this class offer an economically attractive opportunity to combine high-performance technology at a good price. The machine is equipped with a motorized depth stop, that facilitates precise and comfortable work. In addition, it has a segmented upper beam with a height of 110 mm, which makes the machine particularly can be used flexibly for different bending and bending work. This used RAS 62.30 is th ...
Large working width: 3060 mm for sheet metal (at 40 kg strength) up to: 4 mm Kl. Bending radius: sheet thickness x 1.25 Kl. Inboard height: sheet thickness x 6 Opening width of the upper beam: 220 mm Adjustability of the lower/bending beam: 90 mm Max. bending angle: 180° Lifting speed down/up: 40/60 mm/s Hydraulic drive: 380 V, 7.5 kW Weight: 4.3 t Space requirement: 4150 x 1800 x 2500 mm
Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motorized backgauge with hinged cams up to 2500 mm with stop extension (disassembled) Motorized bending beam adjustment Multibend 9001 controller Segmented upper beam tool with automatic tool clamping (height 100 mm) Operating instructions Weight: 5800 kg
Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg
Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm
with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3
Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm
Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons
Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold
sheet width: 4000 mm plate thickness: 2,5 mm distance between columns: 4060 mm stroke: 300 mm total power requirement: 3 kW weight of the machine ca.: 5.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 6040 mm plate thickness: 2 mm total power requirement: 10 kW weight of the machine ca.: 7.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3200 mm plate thickness: 4 mm Opening width of the upper beam: 400 mm Bending Angle: 0-180 ° total power requirement: 7,5 kW dimensions of the machine ca.: 5000x2200x2560 mm weight of the machine ca.: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting length: 3150 mm plate thickness: 4 mm cutting angle: 1,45 ° no. of strokes: 35-80 Hub/min column arm: 200 mm Number of hold downs: 16 Stück rear stop: 5 - 1000 mm table height: 750 mm total power requirement: 7,5 kW weight: 4.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1630 mm plate thickness: 3 mm total power requirement: 2 kW weight of the machine ca.: 1300 kg dimensions of the machine ca.: 2360x1250x1280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 3 mm total power requirement: 4 kW weight of the machine ca.: 3.300 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 2,5 mm Opening width of the upper beam: 200 mm Bending Angle: 0-180 ° engine output: 2,6 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 3150x1200x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate thickness: 2,25 mm distance between columns: 2040 mm total power requirement: 7,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,2x1,7x1,1 m SN-No. 380/6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 2040 mm plate thickness: 3,5 mm distance between columns: 2100 mm sheet width: 2040 mm output: 3,7 kw weight of the machine ca.: 2,3 t Baujahr: unbekannt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.