peripheral equipment (e.g. heating, conveying, drying) used for sale

Sawn timber sorting and packaging line 2.90-5.20m Sequence description Dispensed Home & Dispensers Side goods are collected separately by means of conveyor belts into two stacks on top of each other. The storage tanks are emptied via the separation conveyor to the board feeder and board turner. At the Zuteil-u. The operator is located at the turning station, who is responsible for monitoring and assessing the quality of the boards. All boards are inspected from two sides and then electronically measured, this is done according to length, width, thickness and thickness. Quality in transverse transport. About the Wende-u. The cut goods are sent to the sorting conveyor, after which they are sorted into the 30 boxes At the end, stray sorting conveyors are transported away by conveyor belt. The belt boxes are emptied by lowering and disengaging the belts. Subsequently, the respectiv ...

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW

Vibrating screen, motor approx. 5kW

WEIMA WL5 chipper-shredder Loading inlet 1000x800mm Rotor width 800mm 15kw main motor Number of knives 19 Rotor diameter 252mm 15/12mm sieve Autoreverse Outlet spigot 200mm DTR documentation Weight about 1500kg Net price

Conveyor for wet pieces in laquer lineLength: 3 m.Width: 1,3 m.Cleaning brush at the bottomMotorised feedworks

Length 6.04 m.Roll width 40 cmRoller diameter 75 mmBelt driveCenter distance of the rollers approx. 50 cmWorking height adjustable 85 - 95 cmElectrical cabinet not included

Workpiece dimensions up to approx. 5 m. length, 250 mm widthSliding blocks for possible loading with singulatorTransverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x4 perpendicular stop rollers4 non-driven feed rollers1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/sWorking height 70 cmElectrical cabinet not included

In line panel rotatorMax. panel sizes: 5200 x 1350 mmMax. panel thickness: 60 mmWorking height: ca. 900 mm6 cycles/min

hydraulische lifting tabledimensions of the table (single): 1100 x 1450 mmheight min/max: 400 mm / 2000 mmmaximum charge: 1000 kg

curved conveyor beltbend 90°width carpet 500 mmtotal width 700 mmmin/max height 890/990 mmlength inner size 2800 mmengine 0.55 kW

Motor: 5.5kWSpeed: 300t/minSuction: Dia 25cmInlet: 30x 20cmWith mounting bracketWith control box

Lamier FL 7B 4kw extraction system Power 4kw Number of bulk bags 2pcs Diameter of bags fi600mm Number of filter bags 32pcs Diameter of filter bags fi 200mm Filter bag length 1550mm Bag shaking system Inlet port diameter 300mm CE Certified Dimensions: height 370cm, width about 260cm, depth 110cm

Suction nozzle diameter: 120 mm; Volume flow: 1900 m³/h; Negative pressure: 2500Pa; Scout bag volume: 1 x 1426 m³; Filter cleaning: manual; Motor power: 1.1 kW; Dimensions: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg;

Suction nozzle diameter: 260mm; Nominal volume flow: 7700 m³/h; Scout bag volume: 2 x 290 l; Filter cleaning: manual; Motor power: 4.8 kW; Dimensions: 1900 x 670 x 2800 mm (L x W x H); Weight: 88 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick-release fasteners for filter and chip bagFine filter bag double-woven

Blowing diameter: 300mm; Spähne bags: 4; Filter Holes: 16; Filter cleaning: manual; Dimensions: approx.: 1900 x 670 x 2800 mm (L x W x H);

Suction nozzle diameter: 200 mm / 2 x 100 mm; Nominal volume flow: 1900 m³/h; Scout bag volume: 1 x 110 l; Filter cleaning: manual; Motor power: 1.5 kW; Machine height: 1000 x 500 x 2100 mm (L x W x H); Weight: 39 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick release fasteners for filter and chip bagFine filter bag double

Suction nozzle diameter: 200mm; Nominal volume flow: 2800 m³/h; Scout bag volume: 2 x 120 l; Filter cleaning: manual; Motor power: 2.2 kW; Dimensions: 1500 x 500 x 2100 mm (L x W x H); Weight: 53 kg; For milling, planing and sawdust (not suitable for dust)180Â rotatable extraction unit enables extraction guidance from below or aboveStable metal fan wheel as standard with high-quality chassis for better stability and easy manoeuvringQuick-release fasteners for filter and chip bagFine filter bag double-woven

Suction nozzle diameter: 120 mm or 100 mm; Nominal volume flow: 1900 m³/h; Scouting bag volume: 1 x 0.1426m³; Filter cleaning: manual; Motor power: 1.1 kW; Machine height: 1000 x 500 x 1800 mm (L x W x H); Weight: 39 kg;

Suction nozzle diameter: 150 mm; Volume flow: 3000 m³/h; Negative pressure: 3500Pa; Air speed: 47m/s; Bulking bag volume: 2 x 0.1426m³; Filter area: 5m²; Filter cleaning: manual; Motor power: 1.5 kW; Dimensions: Weight:

Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: mororic; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also for

Suction nozzle diameter: 160mm; maximum volume flow: 2000 m³/h; Nominal volume flow: 1448 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 3000 pa; Filter area: 10.5 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 64 db; Scout bag volume: 160 l; Filter cleaning: mororic; Motor power: 3 kW; Machine length: 1800 mm; Machine width: 820 mm; Machine height: 2220 mm; Weight: 320 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also for

Suction nozzle diameter: 200mm; maximum volume flow: 3200 m³/h; Nominal volume flow: 2262 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2250 pa; Filter area: 16 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: pneumatic, jet cleaning; Motor power: 4 kW; Machine length: 2340 mm; Machine width: 880 mm; Machine height: 2190 mm; Weight: 385 kg; The Riedex vacuum dust extractors have been developed for the extraction of wood chips, wood dust and related substances

Suction nozzle diameter: 160mm; maximum volume flow: 2000 m³/h; Nominal volume flow: 1448 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 3000 pa; Filter area: 10.5 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 64 db; Scout bag volume: 160 l; Filter cleaning: pneumatic; Motor power: 3 kW; Machine length: 1800 mm; Machine width: 820 mm; Machine height: 2220 mm; Weight: 320 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also for

Suction nozzle diameter: 250mm; maximum volume flow: 5000 m³/h; Nominal volume flow: 3534 m³/h; Volume flow monitoring: pressure differential indicator; Filter area: 25.4 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 70 db; Scout bag volume: 480 l; Filter cleaning: mororic; Motor power: 5.5 kW; Extinguishing device: yes; Machine length: 3510 mm ; Machine width: 880 mm; Machine height: 2545 mm; Weight: 850 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also

Suction nozzle diameter: 300mm; maximum volume flow: 6000 m³/h; Nominal volume flow: 5089 m³/h; Volume flow monitoring: pressure differential indicator; Filter area: 31.8 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 70 db; Scout bag volume: 480 l; Filter cleaning: mororic; Motor power: 7.5 kW; Extinguishing device: yes; Machine length: 3245 mm ; Machine width: 1030 mm; Machine height: 2595 mm; Weight: 780 kg; The Riedex vacuum dust collectors have been developed for the extraction of wood chips, wood dust and related substances, but also

Suction nozzle diameter: 250mm; Volume flow: 4900 m³/h; Volume flow monitoring: pressure differential indicator; Negative pressure: 2740 pa; Filter area: 21.7 m²; Residual dust content: less than 0.1 mg/m³; Sound pressure level: 65 db; Späh bag volume: 320 l; Filter cleaning: pneumatic, jet cleaning; Motor power: 6.5 kW; Machine length: Machine width: Machine height: Weight:

Suction nozzle diameter: 1 x 200, 3 x 100mm; Nominal volume flow: 1760 m³/h; Residual dust content: 0.1 mg/m³; Chip collection volume: 240l; Filter cleaning: motorized; Motor power: 3 kW; Noise level: 78dB(A); Machine length: 1340 mm; Machine width: 900 mm; Machine height: 2170 mm; Weight: 178 kg; Clean exhaust air by separating dust in the cyclone separator and cartridge filter Effective cartridge filter with a large filter area, easy to remove for cleaning or changing Automatic filter cleaning for consistently high extraction performance Included

Suction diameter: 160 mm; Blow-out diameter: 160 mm; Volume flow: 2500 m³/h; Motor power: 2.2 kW; Weight: 50 kg; Very stable blower with steel impeller.

Suction diameter: 300 mm; Discharge diameter: 300 mm; Volume flow: 5400 m³/h; Motor power: 2.5 kW; Weight: 100 kg; Very stable blower with steel impeller.

Lot of new polyethylene (PE green) carriers for a block hoist in a sawmill., length: 450 mm, width: 40 mm, height: 50/70 mm, Hole spacing: 50 mm, number: 45 pieces