other machines for plastic used for sale

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted L tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h, depending on the type of plastic and wall thickness. Drive power 30 kw

Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30

The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput is between 500 kg – 1000 kg/h. The facility consists of: • Feed belt • Load-dependent control for the feed belt • Metal detection coil • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo Ce9vqix • Plastcompactor unit HV-70, which consists of storage silo feed auger, plastcompactor, central blower and cooling circuit • HERBOLD recutting mill type SML 45/100-S4-2 • Intensive cooling • Conveyor blower SZS II 630/200 • Screening machine • Undersize recirculation into the compactor silo • Material conveying type MFT with big bag station and automatic diverter to the on-site silo • Automatic exhaust air filter • Electrical circuit •Compressor.

Inclined conveyor belt on aluminium profile - MB Conveyors N-CPR (2 pcs.) Year of construction: 2011 Location: Lodz, Poland The inclined conveyor belt on aluminum profile, with regulation of height and angle of inclination Length of the inclined strap 200 cm, length of the horizontal strap 70 cm, width of the strap 44.5 cm Carriers with a height of 3.5 cm every 39 cm Height of the conveyor belt housing: 5 cm All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Conveyor belt in the form Z - MTF Technik 2L-HE Year of construction: Location: Lodz, Poland Conveyor belt in the shape Z Width of the carrying strap 31 cm Length of the inclined support strap 130 cm Length of the lower strap 80 cm Length of the upper strap 50 cm Carriers with a height of 3 cm every 60 cm Height of the conveyor belt housing: 8 cm Conveyor belt mobile on wheels All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Plastic compactor Main drive 132 kW Complete system with recutting mill, fine material separation and recirculation, electrical control

Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use

Conveyor belt / belt conveyor Belt width: approx. 1,400 mm Axle distance: approx. 8,000 mm Drive: 2.2 kW

rotorwidth: 300mm rotorØ: 450mm feed hopper: 250mm x 280mm rotor knives: 9 bed knives: 2; ready for operation

Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.

vertical smoothing unit, 900 mm 3 rollers, D = 355 mm 40 m/min pneumatic delivery of the rollers with cooling rollers, trimming station, extractor and chassis

complete package with perforated disc, siebronde, nozzle plate we also supply new nozzle plates according to your requirements Monofilament systems on request and specification

new unit, vertical designed roller sizes : D = 355 x 900 mm width with post-cooling rollers with edge-trim device with puller, comeplete unit moveable by motor

Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible.

A mould plate is pressed onto the desired material ( e.g. foam ) by means of the press and the desired product is obtained.

Year: 2008 - technically efficient, ready to work – after full service - chiseling up + down - PLC control - feeding table

This TTN 400 250 was manufactured in 2012. It features an XY table for product positioning and an electronic shuttle for 6-color printing. The machine includes a 4-color inkwell and multiple cups for versatile printing options. Ideal for those looking to enhance their printing capabilities. Contact us for more information.

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

CPE Gloves Stamping Machine exclude stamping mould, include silicon belt, stamping film holders (one set 2 pcs) and stainless steel surface for each machine

SPIROFLUX DryerW x L x H 80 x 55 x 160 cm

KTC mechanical shear (guillotine) for cutting plastic sheet up to 6 mm thick and 1440 mm useful width. Equipped with a 7.5 HP (5.5 kW) geared motor, it offers precise and repetitive cuts for plastics transformation processes. Ideal for extrusion or recycling lines. Robust design and reliable operation.

Robot milling machine

Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible.

A calendaring machine is available. Working width: approx. 1200mm. New rollers, a new toothed belt and a new motor have been fitted to the machine. New rubberized rollers, a new motor and the air system have been installed in the haul-off. An on-site inspection is possible.

Two rolling mills for thermosetting plastics are available. 1) 2x identical rolling mills Berstorff (Krauss Maffei), year of construction: 1959, drive wheel renewal: 2000, working width: 1200mm, roll diameter: 400mm. 2) Big bag frame with electric chain hoist. 3) Suction blower. 4) Engelsmann screening plant. 5) Glass fiber dosing devices. 6) Conveying units, control system and screws. 7) Krauss Maffei test laboratory roller for color determination. Without shredding units. Documentation available. On-site inspection is possible.

Year: 2001 serial number: 0940/01 operating pressure: 8 barThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.