265 offers

The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:

 

presses
Entry date: 26.03.2024
item-No.: 162685099

used

HERBOLD Meckesheim GmbH TOP SELLER
Location: 74909 Meckesheim Land-de

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

presses
Entry date: 05.03.2024
ankerimg
item-No.: 162687087

used

HERBOLD Meckesheim GmbH TOP SELLER
Location: 74909 Meckesheim Land-de

Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Entry date: 13.11.2026
item-No.: 162755950
New in: 1990

used

HVFJ
Location: Mecklenburg-Vorpommern Land-de
Price: VB 12.900 €

Channel baler PAAL KONTI 325 B Year of manufacture 1990 + 39,929 operating hours Electric drive 104 kW (2x 52 kW) Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm without feed belt Weight approx. 31 t Mounting of the master cylinder on the pressure plate is defective (welded) Knives and counter blades are worn out or no longer available Duct/pressure plate guide (side walls, floor and rails) is worn The table of the printing plate has already been welded several times Printing plate rollers are worn Main control block is leaking Hold-down is knocked out Status light display is faulty Net price ex site 12,900,-- € + VAT Sale from location D - BL Mecklenburg-Vorpommern Code No. Q80

Entry date: 06.11.2026
approved
dealer
item-No.: 162755364
New in: 2022

used

check RDA Recycling Machinery GmbH
Location: 28816 Stuhr/Bremen Land-de

Channel baler Paal Pacomat III-50D, built in 2022, very good condition Technical data: Manufacturer: Kadant Paal Type Pacomat III-50D Year of construction 2022 Operating hours approx. 1500 Pressing force 50 t Connected load 24 kW Filling opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, foil The press is still in use until the beginning of December and can be viewed in operation The condition is very good. It was only used for paper / die-cutting residues. The complete operating instructions including electrical/hydraulic circuit diagram and CE declaration are available. The co ...

Entry date: 05.11.2026
item-No.: 162755341
New in: 2012

used

POL-SERVICE JACEK MAJCHER
Location: 35-31 Rzeszów Land-pl
Price: 75.000 €

Automatic channel baler / baling press Presona LP40 EH1 – 40 t, year 2012 + self-propelled stretch wrapper for pallet wrapping (robopack). POL-SERVICE Majcher – manufacturer and supplier of plastics processing machinery with over 30 years of experience. We offer an automatic horizontal channel baler Presona LP40 EH1 from 2012, designed for baling cardboard, waste paper, film, plastics, PET bottles, foams, and other recyclable waste. The machine is equipped with a pre-press and operates in a line with a belt conveyor (visible in the photos). Technical data (Presona LP40 EH1): Main cylinder pressing force: 40 t (approx. 400 kN) Pre-press force: approx. 20 t Max. oil pressure: 200 bar / 20 MPa (as per the machine nameplate) Theoretical volumetric capacity: approx. 290 m³/h Working volumetric capacity: up to approx. 140–160 m³/h (depending on material) Mass throughpu ...

Entry date: 02.11.2026
approved
dealer
item-No.: 162755026
New in: 2006

used

check RDA Recycling Machinery GmbH
Location: 28816 Stuhr/Bremen Land-de

Channel baler Presona LP 80 VH1 with vorbulator, built in 2006, revised Technical data: Manufacturer: Presona Sweden Type LP 80 VH1 Year of construction 2006 Press force 78 t Drive power 55 kW Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight approx. 450-600 kg Throughput at bulk density of 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW: 20-27 t/h 5-fold vertical bonding Weight approx. 25000 kg Note: The press was revised by us. The following work was carried out: Press cleaned and repainted Piston rod revised Steel construction on the press body New Hardox wear plates press floor Exchange of: Shaft Wire Control Chain Wire Pull Wire Pull Pins Wire guide rollers Wheels Slide rails Hydraulic hose lines Hydraulic seals Oil Temperature Sensor Photocells Filling Chute Please note: All technical data refer ...

Entry date: 30.10.2026
item-No.: 162754867
New in: 2007

used

HVFJ
Location: Sachsen Land-de
Price: VB 79.900 €

Channel baler PAAL KONTI 325 E Year of manufacture 2007 Electric drive 109 kW Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm Wirbulator Wire Setup Personal security system Control cabinet Weight 28 t very good condition = completely overhauled Net price ex location 79,900,-- € + VAT Sale from location D - BL Saxony Code No. Q75

Entry date: 30.10.2026
approved
dealer
item-No.: 162754862
New in: 1999

used

check Acorn Recyclers
Location: LE12 5TY Loughborough, Leicestershire Land-uk
Price: 55.000 GBP

• 170 tonne closing power • Channel 1,150 × 1,100 mm • 2 × 55 kW pump motors (110 kW total), 415 V / 50 Hz • 3,000 litre hydraulic tank (ISO 46 oil) • Automatic wire tying • Serial no. 2399/1 • Infeed conveyor included – pit-fed steel slat conveyor with overhead feed section to the hopper • Bale discharge tray • Originally installed by RCP Recycling Systems, Telford • CE marked • Already removed and ready for loading at our Wymeswold site, Leicestershire A 1999 Macpresse MAC 111 automatic channel baler, sold with its infeed conveyor. The MAC 111 is a heavy-duty Italian-built baler for high-volume baling of cardboard (OCC), mixed paper, plastics and other recyclables, with a large 1,150 × 1,100 mm channel and twin 55 kW pump motors. The baler and conveyor have already been taken out, so there is no dismantling for the buyer to arrange. Photos were t ...

Entry date: 30.10.2026
approved
dealer
item-No.: 162754860
New in: 2026

used

check Acorn Recyclers
Location: LE12 5TY Loughborough, Leicestershire Land-uk
Price: 35.000 GBP

• Fully automatic horizontal channel baler • Automatic wire tying system • Schneider Magelis touchscreen operator panel • Separate motor control cabinet with emergency stop, door interlocks and hours meter • Lockout station fitted for safe maintenance • Enclosed hydraulic power pack • Operational – may require some minor repairs. Sold as seen • Already removed – loading provided at our Wymeswold site, Leicestershire. Buyer arranges haulage A heavy-duty Dutch-built Bollegraaf HBC 110 channel baler, suited to high-volume baling of cardboard, paper, film and other recyclables. Bollegraaf is one of the best-known names in recycling balers, and the HBC range is built for continuous production use. The machine has been removed and is ready to load. Viewing is welcome before purchase. We run balers, granulators and shredders on our own site at Wymeswold, near ...

presses /Baling presses
Entry date: 30.10.2026
approved
dealer
item-No.: 162754855
New in: 2026

used

check Acorn Recyclers
Location: LE12 5TY Loughborough, Leicestershire Land-uk

• Available with conveyors (£18 for the pair) An AUSONIA vertical baler. Vertical balers have a small footprint and are loaded from the front, which makes them a good fit for shops, warehouses and factories producing steady volumes of cardboard, paper or film that do not justify a horizontal baler. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

presses /Baling presses
Entry date: 30.10.2026
approved
dealer
item-No.: 162754852
New in: 2008

used

check Acorn Recyclers
Location: LE12 5TY Loughborough, Leicestershire Land-uk

A 2008 Garbage Gorger MSK baler. Balers like this compact cardboard, paper, film and other dry recyclables at the point they are produced, which frees up floor space, reduces collections and makes the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

presses /Baling presses
Entry date: 30.10.2026
approved
dealer
item-No.: 162754849
New in: 2010

used

check Acorn Recyclers
Location: LE12 5TY Loughborough, Leicestershire Land-uk

A 2010 IPS baler, model AT-754-HS-30. Balers like this compress cardboard, paper, plastic film and other dry recyclables into dense bales, reducing collections and storage space and making the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

presses /Baling presses
Entry date: 30.10.2026
approved
dealer
item-No.: 162754848
New in: 2007

used

check Acorn Recyclers
Location: LE12 5TY Loughborough, Leicestershire Land-uk

A 2007 Anis Trend baler, model ATS 110-75S-9CT-150T. Balers like this compress loose cardboard, paper, plastic film and other dry recyclables into dense, stackable bales, cutting the number of collections a site needs and turning a bulky waste stream into a saleable material. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.

Entry date: 29.10.2026
item-No.: 162754788

used

HVFJ
Location: Brandenburg Land-de
Price: VB 6.250 €

12 pieces ring dies Paladin 2400 CAV for pelletizing mill Andritz type Paladin 2400-250/ 2R BM Perforation 16/22 mm Pockets milled out for special rolls Material X46Cr13 unused = new Price per unit net ex location 6,250,-- € + VAT Sale from BL Brandenburg Code Q17

presses /Baling presses
Entry date: 28.10.2026
item-No.: 162754641
New in: 2005

used

HVFJ
Location: Thüringen Land-de
VS

Baler Bramidan Model HDX50 Type PEV Year of manufacture 2005 Electric drive 5.5 kW Pressing force 50 t Filling opening 1,090 x 610 mm Bale size 1,200 x 800 x 1,100 mm Stroke 1,210 mm Cycle duration avg. 22 s 4 lacing + lacing ribbon or steel wire Automatic bale ejection Dimensions: Length 1,965 mm x Width 1,365 mm x Height 2,540 mm Weight 2.5 t Sale against bid from location D - BL Thuringia Code No. Q53

Entry date: 27.10.2026
approved
dealer
item-No.: 162754570

used

check RDA Recycling Machinery GmbH
Location: 28816 Stuhr/Bremen Land-de

Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: pa ...

presses /Baling presses
Entry date: 26.10.2026
item-No.: 162754459
New in: 2002

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl
Price: 1 €

Technical data Maximum pressure: 80 tons Year of Make: 2002 Press force: 90.9 t/m² Number of bindings: 4 - horizontal Channel cross-section: 1100 x 800 mm Dimensions of the tailgate: 160 x 102 cm Bale weight: approx. 500 kg Weight: approx. 16,5Tonen Power connection: 400 V/75kW Bale tying: automatic Press capacity under operating conditions: max 285 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9.9 tons/hour Theoretical throughput to density 65 kg/m3: approx. 18.5 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel Automatic rod for cleaning the blades from stuck material Choice of the length of the finished bale Press plate stably guided on the large rollers  ...

presses /Baling presses
Entry date: 20.10.2026
item-No.: 162754171
New in: 1991

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl

Technical data Maximum pressure: 8 tons Power connection: 400V/4kW Press force: 3.23 kg/cm² Year of Make: 1991 Bale size: 550x450x350 mm Productivity: - Bale weight: 30-60 kg Price: on request Machine is fully functional after technical supervision.

presses /Baling presses
Entry date: 19.10.2026
item-No.: 162754054
New in: 1991

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl

Technical data Maximum pressure: 20 tons Power connection: 380V / 2.2kW Pressing force: 2.6 kg/cm² Productivity: approx. 6 bales/hour Bale size: 1100x700x800 mm Price: on request Bale weight: approx. 200 kg Year of Make: 1991 Machine is fully functional, after the technical inspection.Price also includes the paint renovation

presses /Baling presses
Entry date: 19.10.2026
item-No.: 162754053
New in: 2013

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl

Technical data Maximum pressure: 50 tons Power connection: 400V / 4 kW Press force: 5.2 kg/cm² Year of construction: 2013 Bale size: 1200x800x1100 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical inspection and after renovation

presses /Baling presses
Entry date: 19.10.2026
item-No.: 162754050
New in: 2004

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl

Technical data Maximum pressure: 54 tons Power connection: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of Make: 2004 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Bale tying only with wire Machine is fully functional, after technical inspection and after renovation

presses /Baling presses
Entry date: 19.10.2026
item-No.: 162754041
New in: 2006

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl

Technical data Maximum pressure: 16 tons Power connection: 400V / 4kW Press force: 2.08 kg/cm² Year of Make: 2006 Bale size: 1100x700x800 mm Productivity: approx. 3 bales/hour Bale weight: approx. 150-250 kg Machine is fully functional after technical supervision.

Entry date: 18.10.2026
item-No.: 162753972
New in: 2016

used

IDL-Systems GmbH & Co. KG
Location: 58730 Fröndenberg Land-de
Price: VB 6.000 €

HAN10R press container from 2016. The press was only used for paper/cardboard and was not outdoors most of the time. It is therefore in good condition. The press is equipped with an electric swivel lid. At the push of the head, this opens, you throw the waste into the press and press another button. Then the swivel lid closes and the press is started. The two rails in front of the insertion should only prevent the disposal of cardboard boxes that are too large. These can be unscrewed. The entire drum housing can be removed by loosening 8 screws. Then the press can be used normally. The press has published a current UVV of 22.09.2026 We will be happy to answer any further information. The press must be picked up in 58730 Fröndenberg. The sale is exclusively to commercial buyers. The price indicated is a net price (exw).

Entry date: 07.10.2026
item-No.: 162753451

used

ARTechnic
Location: 43300 Bielsko-Biala Land-pl

Technical data Maximum pressure: 60 tons Year of manufacture: 2011 Pressing force: 78 tons/m² Number of bindings: 5 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1500 x 1100 mm Bale weight: 425-575 kg Weight: approx. 21 tons Power connection: 400 V Bale tying: automatic Press capacity under operating conditions: max 370 m³ / hour Press capacity at idle: max 940 m³ / hour Theoretical throughput: to density 30kg/m³) 11 tons/hour Theoretical throughput: to density 50kg/m³) 15 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press  ...

Entry date: 07.10.2026
approved
dealer
item-No.: 162753425

used

check RDA Recycling Machinery GmbH
Location: 28816 Stuhr/Bremen Land-de

Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time.  ...

Entry date: 02.10.2026
item-No.: 162753137
New in: 2014

used

ARTechnic
Location: Land-pl

Technical data Maximum pressure: 75 tons Year of manufacture: 2014 Loading opening: 1816 x 1036 mm Number of bindings: 4 horizontal Channel cross-section: 1100 x 1100 mm Oil tank: 1300l Power connection: 45 kW Weight: approx. 20 tons The press is equipped with a PET bottle perforator.

Entry date: 28.09.2026
item-No.: 162752817
New in: 2009

used

Ausmachinery
Location: Land-au
Price: 19.800 €

For sale is a RUF 5.5/83700 with 60x40mm briquette size used for steel. Machine is in very good condition. Power requirement is 400V AC 11kW 32Amp. Control system is Siemen's S7-200

presses /Baling presses
Entry date: 15.09.2026
approved
dealer
item-No.: 162752106
New in: 2012

used

check Brauner Recyclingtech GmbH
Location: 49324 Melle Land-de

Fully automatic baler Manufacturer: PAAL Type KONTI 325 G/S/k Operating hours: approx. 39,000 h Year of Make: 2012 Technical manufacturer data: Pressing force: 990 kN at 300 bar Specific pressing pressure: 120 N/cm² Drive power: 2 x 55 kW Pump capacity: 2 x 370 l/min. Total connected load: 150 kW / 260 A Volume output at idle: 800 m³/h Volume capacity at 35 kg/m³: 390 m³/h Performance at: 35 kg/m³ bulk density: approx. 13.50 t/h 60 kg/m³ bulk density: approx. 21.5 t/h 100 kg/m³ bulk density: approx. 33 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 3-fold horizontal Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Wirbulator 15 kW - Automatic 3-fold horizontal tying with 40 kg wire unwinding device  ...

presses /Baling presses
Entry date: 14.09.2026
approved
dealer
item-No.: 162752027
New in: 2010

used

check Mertens & Frowein GmbH
Location: Land-de

Technical data press: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2010 Operating hours 3,817 hours, as of August 2026 Number of bales pressed 36,001 bales, as of August 2026 Press force main press 1000 kN Specific pressing force 120 N/cm² Press force cutting edges free kick 121 kN Dimensions of the insertion tray 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 110 kW Current consumption, total 213 A Fuse 250 A slow blow Tying 5-fold horizontally, fully automatic throughput capacities with a Bulk density of 20 kg/cbm 12.86 t/hour Bulk density of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depending on t ...

presses /Baling presses
Entry date: 14.09.2026
approved
dealer
item-No.: 162752016
New in: 2010

used

check Mertens & Frowein GmbH
Location: Land-nl
Price: VB 9.500 €

Technical data press: Manufacturer: Presto GmbH & Co. KG Type CC 36 M Year of construction 2010 Operating hours 3,641 hours Press force main press 36 t Specific pressing force 467 N/cm² Dimensions of the insertion tray 1,080 x 1100 mm (L x W) Cycle time 34 seconds Filling volume / pressing cycle 0.85 m³ Theor. Throughput capacity 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale dimensions 1100 x 750 mm (W x H), length variable Drive power 15 kW Tying 4-fold vertical, semi-automatic, with polyester plastic yarn throughput capacities with a Bulk density of 35 kg/cbm 1.8 t/hour Bulk density of 60 kg/cbm 2.5 t/hour Bulk density of 100 kg/cbm 3.1 t/hour Transport dimensions excluding press 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight press approx. 4 t Remarks: The press was checked for funct ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)