We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 502)
used
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
Press screw REG-MAC for drying foils and fibres, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw
used
Channel baler PAAL KONTI 325 B Year of manufacture 1990 + 39,929 operating hours Electric drive 104 kW (2x 52 kW) Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm without feed belt Weight approx. 31 t Mounting of the master cylinder on the pressure plate is defective (welded) Knives and counter blades are worn out or no longer available Duct/pressure plate guide (side walls, floor and rails) is worn The table of the printing plate has already been welded several times Printing plate rollers are worn Main control block is leaking Hold-down is knocked out Status light display is faulty Net price ex site 12,900,-- € + VAT Sale from location D - BL Mecklenburg-Vorpommern Code No. Q80
used
Channel baler Paal Pacomat III-50D, built in 2022, very good condition Technical data: Manufacturer: Kadant Paal Type Pacomat III-50D Year of construction 2022 Operating hours approx. 1500 Pressing force 50 t Connected load 24 kW Filling opening 1250 x 1020 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 6.4 t/h 60 kg/m³ approx. 8.6 t/h 80 kg/m³ approx. 12.7 t/h Bale weight up to 650 kg Transport dimensions approx. 8172 x 2030 x 2500 mm (LxWxH) Machine weight approx. 12000 kg Materials: paper, cardboard, foil The press is still in use until the beginning of December and can be viewed in operation The condition is very good. It was only used for paper / die-cutting residues. The complete operating instructions including electrical/hydraulic circuit diagram and CE declaration are available. The conve ...
used
Automatic channel baler / baling press Presona LP40 EH1 – 40 t, year 2012 + self-propelled stretch wrapper for pallet wrapping (robopack). POL-SERVICE Majcher – manufacturer and supplier of plastics processing machinery with over 30 years of experience. We offer an automatic horizontal channel baler Presona LP40 EH1 from 2012, designed for baling cardboard, waste paper, film, plastics, PET bottles, foams, and other recyclable waste. The machine is equipped with a pre-press and operates in a line with a belt conveyor (visible in the photos). Technical data (Presona LP40 EH1): Main cylinder pressing force: 40 t (approx. 400 kN) Pre-press force: approx. 20 t Max. oil pressure: 200 bar / 20 MPa (as per the machine nameplate) Theoretical volumetric capacity: approx. 290 m³/h Working volumetric capacity: up to approx. 140–160 m³/h (depending on material) Mass throughput: appro ...
used
Channel baler Presona LP 80 VH1 with vorbulator, built in 2006, revised Technical data: Manufacturer: Presona Sweden Type LP 80 VH1 Year of construction 2006 Press force 78 t Drive power 55 kW Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight approx. 450-600 kg Throughput at bulk density of 30 kg/cbm: 9-12 t/h 50 kg/cbm: 14-17 t/h 100 kg/cbm: 16-25 t/h MSW: 20-27 t/h 5-fold vertical bonding Weight approx. 25000 kg Note: The press was revised by us. The following work was carried out: Press cleaned and repainted Piston rod revised Steel construction on the press body New Hardox wear plates press floor Exchange of: Shaft Wire Control Chain Wire Pull Wire Pull Pins Wire guide rollers Wheels Slide rails Hydraulic hose lines Hydraulic seals Oil Temperature Sensor Photocells Filling Chute Please note: All technical data refer ...
used
Channel baler PAAL KONTI 325 E Year of manufacture 2007 Electric drive 109 kW Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm Wirbulator Wire Setup Personal security system Control cabinet Weight 28 t very good condition = completely overhauled Net price ex location 79,900,-- € + VAT Sale from location D - BL Saxony Code No. Q75
used
• 170 tonne closing power • Channel 1,150 × 1,100 mm • 2 × 55 kW pump motors (110 kW total), 415 V / 50 Hz • 3,000 litre hydraulic tank (ISO 46 oil) • Automatic wire tying • Serial no. 2399/1 • Infeed conveyor included – pit-fed steel slat conveyor with overhead feed section to the hopper • Bale discharge tray • Originally installed by RCP Recycling Systems, Telford • CE marked • Already removed and ready for loading at our Wymeswold site, Leicestershire A 1999 Macpresse MAC 111 automatic channel baler, sold with its infeed conveyor. The MAC 111 is a heavy-duty Italian-built baler for high-volume baling of cardboard (OCC), mixed paper, plastics and other recyclables, with a large 1,150 × 1,100 mm channel and twin 55 kW pump motors. The baler and conveyor have already been taken out, so there is no dismantling for the buyer to arrange. Photos were taken before removal. We ...
used
• Fully automatic horizontal channel baler • Automatic wire tying system • Schneider Magelis touchscreen operator panel • Separate motor control cabinet with emergency stop, door interlocks and hours meter • Lockout station fitted for safe maintenance • Enclosed hydraulic power pack • Operational – may require some minor repairs. Sold as seen • Already removed – loading provided at our Wymeswold site, Leicestershire. Buyer arranges haulage A heavy-duty Dutch-built Bollegraaf HBC 110 channel baler, suited to high-volume baling of cardboard, paper, film and other recyclables. Bollegraaf is one of the best-known names in recycling balers, and the HBC range is built for continuous production use. The machine has been removed and is ready to load. Viewing is welcome before purchase. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we ...
used
• Available with conveyors (£18 for the pair) An AUSONIA vertical baler. Vertical balers have a small footprint and are loaded from the front, which makes them a good fit for shops, warehouses and factories producing steady volumes of cardboard, paper or film that do not justify a horizontal baler. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.
used
A 2008 Garbage Gorger MSK baler. Balers like this compact cardboard, paper, film and other dry recyclables at the point they are produced, which frees up floor space, reduces collections and makes the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.
used
A 2010 IPS baler, model AT-754-HS-30. Balers like this compress cardboard, paper, plastic film and other dry recyclables into dense bales, reducing collections and storage space and making the material easier to sell. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.
used
A 2007 Anis Trend baler, model ATS 110-75S-9CT-150T. Balers like this compress loose cardboard, paper, plastic film and other dry recyclables into dense, stackable bales, cutting the number of collections a site needs and turning a bulky waste stream into a saleable material. Before buying a second-hand baler it is worth checking the bale size and weight against what your outlet accepts, the condition of the hydraulics and rams, the power supply you have available and how the machine will be fed. Well-made bales of cardboard, paper or film are cheaper to move and can often earn a rebate rather than a disposal charge. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.
used
12 pieces ring dies Paladin 2400 CAV for pelletizing mill Andritz type Paladin 2400-250/ 2R BM Perforation 16/22 mm Pockets milled out for special rolls Material X46Cr13 unused = new Price per unit net ex location 6,250,-- € + VAT Sale from BL Brandenburg Code Q17
used
Baler Bramidan Model HDX50 Type PEV Year of manufacture 2005 Electric drive 5.5 kW Pressing force 50 t Filling opening 1,090 x 610 mm Bale size 1,200 x 800 x 1,100 mm Stroke 1,210 mm Cycle duration avg. 22 s 4 lacing + lacing ribbon or steel wire Automatic bale ejection Dimensions: Length 1,965 mm x Width 1,365 mm x Height 2,540 mm Weight 2.5 t Sale against bid from location D - BL Thuringia Code No. Q53
used
Channel baler Paal Konti 275 D, built in 2001 with vorbulator and chain belt conveyor Paal KEM-1500, built in 2005 Technical data: Manufacturer: Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20900 as of 10/2026 Pressing force 75 t Total connection 106 kW Filling opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveying speed: 0.29 m/s Nominal width 1500 mm Wheelbase 17500 mm Length of feed belt: approx. 10000 mm Length of climbing section: approx. 9000 mm Gooseneck: approx. 1000 mm Slope angle: 28° Materials: paper, ...
used
Technical data Maximum pressure: 80 tons Year of Make: 2002 Press force: 90.9 t/m² Number of bindings: 4 - horizontal Channel cross-section: 1100 x 800 mm Dimensions of the tailgate: 160 x 102 cm Bale weight: approx. 500 kg Weight: approx. 16,5Tonen Power connection: 400 V/75kW Bale tying: automatic Press capacity under operating conditions: max 285 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 9.9 tons/hour Theoretical throughput to density 65 kg/m3: approx. 18.5 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel Automatic rod for cleaning the blades from stuck material Choice of the length of the finished bale Press plate stably guided on the large rollers ...
used
Technical data Maximum pressure: 8 tons Power connection: 400V/4kW Press force: 3.23 kg/cm² Year of Make: 1991 Bale size: 550x450x350 mm Productivity: - Bale weight: 30-60 kg Price: on request Machine is fully functional after technical supervision.
used
Technical data Maximum pressure: 20 tons Power connection: 380V / 2.2kW Pressing force: 2.6 kg/cm² Productivity: approx. 6 bales/hour Bale size: 1100x700x800 mm Price: on request Bale weight: approx. 200 kg Year of Make: 1991 Machine is fully functional, after the technical inspection.Price also includes the paint renovation
used
Technical data Maximum pressure: 50 tons Power connection: 400V / 4 kW Press force: 5.2 kg/cm² Year of construction: 2013 Bale size: 1200x800x1100 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical inspection and after renovation