thickness of jaw: 125 mm diameter: mm weight of the machine ca.: 39 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm : 50 mm clamping width: 180 mm weight: 37 kg dimensions of the machine ca.: 450 x 240 x 130 mm mechanical vice in great condition - with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm : 50 mm clamping width: 180 mm weight: 37 kg dimensions of the machine ca.: 450 x 240 x 130 mm mechanical vice in great condition - with crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulics full clamping cylinder RÖHM OVS 105 452-25 ( OVS105452-25 ) max 40 bar max 8000 rpm piston stroke 32 mm piston diameter: Ø 105 mm piston rod diameter: Ø 25 / 35 mm New ! Dimensions: 340 x 310 x 150 mm
diameter: 85 mm tool adaptor: SK 50 bore of diameter max.: 130 mm adjustment of the slide: 40 mm tool tapers in the slides: 20 mm weight: ca. 3 kg Wooden box with accessories: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine vice with table RÖHM jaw width: 125 mm jaw height: 45 mm wingspan: 12 ... 210 mm pneumatic clamping booster ! with turntable, 360 ° rotatable used, tested ! Dimensions: 440 x 300 x 145 mm
Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck RÖHM KFD-200/3HS 143888 outer diameter: Ø 200 mm Height without jaws: 110 mm Passage: Ø 66 mm Speed: max. 6500 rpm Flange diameter: Ø 200 / 170 mm bolt circle diameter: Ø 134 mm 3x screw M12 x 1.75 jaws individually adjustable by toothing ! with accessories ! New ! Dimensions ( lathe chuck ): 200 x 200 x 110 mm Dimensions ( packaging ): 230 x 230 x 240 mm
Machine vice with quick adjustment and force amplification RÖHM 160 mm jaw width: 160 mm jaw height: 54 mm wingspan: 0...110 / 210 / 310 mm wingspan in 3 steps ! used, tested ! Dimensions: 550 x 250 x 135 mm
Clamping claw, single clamping claw, 2 pieces RÖHM 149124 Type: T-Slot 18 DIN 650 ( M16 ) Groove width: 18 mm Dimensions( single clamping clamp ): 75 x 45 x 30 mm New ! 2 pieces ! Dimensions( packaging ): 145 x 110 x 50 mm
2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm jaws individually adjustable by toothing used, checked ! Dimensions: 335 x 170 x 160 mm
2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm Jaws individually adjustable by toothing used, checked ! Dimensions: 220 x 165 x 160 mm
Hydraulic full tension cylinder RÖHM OVS 85 ( OVS85 ) p: 75 bar n: 8000 rpm piston stroke: 32 mm piston rod diameter: Ø 30 mm New ! Dimensions: 340 x 210 x 120 mm
2 pieces, reducing sleeves RH RÖHM 262 MK5 : MK3 DIN 2185 Dimensions: 170 x 40 x 90 mm
diameter: 315 mm hollow: 100 mm weight: 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used
diameter: 250 mm hollow: 105 mm weight: / kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø105mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mm hollow: 75 mm weight: 40 kg - Four-jaw chuck RÖHM - Diameter Ø250mm - Passage: Ø75mm - Weight: 40kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-jaw-chuck diameter: 240 mm weight of the machine ca.: t for table usage: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 315 mm hollow: 100 mm weight: / kg Ø 315 mm Ø passage 100 mm Height without jaws 85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 260 mm numer of jaw: 4 Stück thickness of jaw: 35 mm hight of jaw: 60 mm height of plate: 80 mm tool adaptor: KK 5 DIN 55027 daylight: 68 mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm : 45 mm total power requirement: kW weight of the machine ca.: 40 kg dimensions of the machine ca.: m turn tilt plate: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm : 45 mm total power requirement: kW weight of the machine ca.: 40 kg dimensions of the machine ca.: m turn tilt plate: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm clamping capacity: 24 kN weight of the machine ca.: 31 kg mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bar: max. 75 bar piston stroke: 0 mm revolutions per minute: 0 U/min 2 pcs. available. Price is for 1 pc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mm hollow: 75 mm weight: 30 kg Ø: 250mm Passage: 75mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 250 mm hollow: 75 mm weight: kg Röhm four-jaw chuck Diameter 250 mm Through hole 75 mm Mounting cone approx. 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 400 mm = pneum. 3-jaw chuck make RÖHM, 400 mmø, with CAMLOCK flange, length of the pull rod 780 mm, ø of the pull rod 40 mm, with maintenance unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
