A balancing machine for motor armatures is sold. Type 421 RBTU Ciao 420 Year 2017 Price VHB VAT reclaimable Balancing machine for commutato-anchors Process-optimized balancing in manual production systems Manual loading and unloading Process reliability thanks to fully automated internal workflow Easy operation: Fully visualized operator guidance with the CAB 870 measuring device Easy installation: Fast commissioning and support by local service personnel in the worldwide service network Application Measure and compensate for the imbalance of wound commutato-anchors of different sizes as well as similar rotors. Use of the machines in series production for production volumes of up to approx. 1 million anchors p.a. Imbalance compensation by milling in one or two planes into the sheet metal package. Compensation procedure Slot milling for component balanci ...
Key data: 40 kg, 1100 mm, 630 mm
Stock number: 3973 BALANCING MACHINE Manufacturer: SCHENCK, Type: R 2 N Machines NO.: ARD 0537, Year of manufacture: 1974 Specifications: Max. diameter 630 mm mm Max. tool weight 0.3 - 40 kg. Max. workpiece length 1100 mm Steuerung New Control VMI APT Balancing Spindle speed 450 - 1800 rpm Length: 1300 mm, Height: 1200 mm, Width: 500 mm, Weight: 800 kg
Inv. Num. : 7512 Type: H 30 BU Producer: SCHENCK Created: 1994 Parameters: Maximum load capacity: 700 kg Max Speed: 2300 1/min Maximum distance between tailstock tips: 1330 mm
SCHENCK hydraulic power unit type PP250A B Used hydraulic power unit. Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 250 l/min Tank capacity 1.3 m³ Year of manufacture 1996 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent ...
Key data: 50000 kg, 9000 mm, 2800 mm
Measuring device CAB 920 PTO shaft drive + belt drive Workpiece length 9m, 4 Further rails to extend the workpiece length to 15m are included. Class B guards Last reviewed September 2022
SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Tank capacity 1 m³ Year of manufacture 1991 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding agent, we ...
SCHENCK hydraulic power unit type PP165 B Used hydraulic power unit Ready to connect and ready for use. Used for servo hydraulics Incl. comprehensive and serviced components (see pictures). Aggregate rental possible. Other power units and hydraulic components available on request (sale/rental). Nominal pressure 315 bar Nominal flow rate 165 l/min Fuel tank capacity 0.95 m³ Year of manufacture 1987 All machines can be viewed in Kassel by arrangement. We would like to point out that the machines offered are used machines and not new machines! The sale of used goods is only to tradespeople within the meaning of § 14 BGB under exclusion of any warranty and return in the actual condition. Upon purchase, you will receive an invoice with VAT (19%). Pick-up in 34123 Kassel, free loaded with forklift. You are also welcome to have the machine picked up by a forwarding a ...
Key data: 50000 kg, 9000 mm, 2800 mm
Bearing center distance 5050 mm Measuring device CAB 920 PTO shaft drive + belt drive Workpiece length 9m, 4 Further rails to extend the workpiece length are included (6m can be extended) Class B guards Last reviewed February 2021 4 Further rails for extending the workpiece length are included
Inv. Num. : 7512 Type: H 30 BU Producer: SCHENCK Created: 1994 Parameters: Maximum load capacity: 700 kg Max. speed: 2300 1/min Maximum distance between tailstock tips: 1330 mm
The machine is in good general condition and is equipped with the following accessories. 1 set of racks with castors 1 set of bearing stands with prisms 1 piece test rotor Various spare parts Operating instructions with spare parts list Price on request
excitation force: 114 kN Motor power approx. 5.5 kW
complete unit with cardan shaft comes from a vibrancy sieve
Nominal flow rate: 165l/min, max. pressure: 315bar, tank volume: 1m³.
balancing body min/max.: 0,1 - 1 kg balancing body diameter w/o machining unit: 300 mm balancing body diameter with machining unit: - total power requirement: 0,7 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 10,61,2 m No. 0304 Vertical balancing machine SCHENCK Z 35 E Working range: max. test piece 300 Control: Test piece weight 100 g - 1 kg Drive: .7 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This SCHENCK DISTEC was manufactured in 2019. It offers reliable performance for your industrial needs. Contact us for more information.
workpiece weight: 30 kg workpiece length: 150 mm dia. on complete length: 500 mm electrics - voltage/frequency: 400/50 V/Hz balancing speed variable: 600-1000 U/min Control: CAB 870 Overall size: 2,7x1,2x1,8 mm weight of the machine ca.: 2,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
workpiece weight: 300 kg workpiece length: 1500 mm dia. on complete length: 450 / 1280 mm electrics - voltage/frequency: 400 / 50 V/Hz balancing speed variable: U/min Control: CAB 700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection
Size: 2.000 x 5.500 mm - Deck: 0,8 mm Stainless steel screen deck - Included: Electrical Motor and springs
workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Schenck-Lauer electrics - voltage/frequency: 400 / 50 V/Hz dimensions: 4,1 x 4,2 x 2,5 m connected load: 12 kVA flange diameter: 250 mm weight: 4,5 t Balancing machine for rotors - Turbocharger fuselage groups - hydraulic measuring station - Compensation station - Pulsation measuring table - Chip extraction - Measuring instrument CAB 950T - feeding device - Schenck/Lauer Control on Dase of Windows The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
