Table milling machine Schröder Table length 2480 mm Extendable table support Milling spindle in the machine diameter 30 mm incl. milling spindle diameter 40 mm with 4 rollers feed wood with mechanical spindle brake by foot lever Weight approx. 800 kg
with pneumatic bending beam support (compressed air required) with manual Knoll roller shears, with Knoll profiling and pressing head Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 4020 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: grey/blue Dimensions: 4465 x 4320 x 1255 mm Machine weight: 2400 kg Upper bolster stroke: 110 mm with roller scissors Bending angle: 145 degrees Machine number: 15000057
Key data: 3020 mm, 2 mm
with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm
Specifications: - Max. working width 2020 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment pre-selectable 0 - 135 ° - Upper bolster clamping via eccentric lever + foot pedal - Largest opening width / stroke of the upper beam 100 mm - Height adjustability of the lower beam 25 mm - Space requirement approx. W 2950 x H 1200 x D 800 mm - Weight approx. 1450 kg
Key data: 3020 mm, 3 mm
one. Bending cheek presentation, foot pedal Sheet width: 3020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: white/blue Total power requirement: 32 A Upper beam stroke: 200 mm Bending angle: 145 degrees Dimensions: 4300 x 2600 x 1900 mm Machine weight: 3960 kg Machine number: 220478
Key data: 2500 mm, 2 mm
Cutting width 2,500 mm Sheet thickness 2 mm Manual backgauge 750 mm
Key data: 2500 mm, 2 mm
Working width 2,500 mm Max. sheet thickness - steel / stainless steel / aluminium 1.5 mm / 0.8 mm / 2.5 mm Bending angle preselection Foot switch
Offer 24482 Specifications: - Max. working width 1020 mm - Max. material thickness 4.0 mm - Cutting angle 2.4 ° - Single stroke – continuous stroke can be preselected -one. Back gauge up to 700 mm - Front angle stop - Front pull-out sheet metal support - Drive 400 V / 3.4 kW - Space requirement approx. W 1450 x H 1180 x D 1400 mm - Weight approx. 900 kg
Offer 24483 Specifications: - Max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment selectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - E. footswitch - Upper bolster drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg
Key data: 3020 mm, 2 mm
Motor bending machine, with manual depth stop (with stop fingers and milling in the lower beam), control via angle stop potentiometer, (control currently under repair) Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.00 mm Sheet thickness aluminium: 3.00 mm Sheet thickness front: 1.50 mm Back gauge: 6 - 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg without roller scissors Machine number: 190029
Folding machine Manufacturer: Schröder Type: MAK II - 2500 Year of Make: 1997 Control: POS 500 Bending length: 2,500 mm Sheet thickness: max. 2.5 mm Weight: approx. 3,700 kg
Key data: 3000 mm, 3 mm
with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 3020 mm, 2 mm
with NC control, motorized backgauge, with Sheet metal holding device pneumatically operated, single and continuous stroke, with pneumatic hold-down, suitable for cutting aluminum, extendable Sheet metal support at the front, cutting gap lighting, pneumatic connection necessary, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Colour: grey/blue Total power requirement: 400 V Machine weight: 1600 kg Dimensions: 3800 x 1500 x 1800 mm Cutting gap adjustment: no Connected voltage: 16 A Pneumatic hold-down device Cutting angle adjustment: no Fixed cutting angle Adjustable back gauge: yes Machine number: 123106 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Specifications: - Max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - Stroke rate up to 34 1/min - Backgauge with positioning control Pos100 - Table height approx. 850 mm - Front angle stop - 2 front support arms - Rear space protection with light barrier - E-foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg
This machine in operation is part of a butter making line, currently it produces 5 tons/hour. It will be available in August 2024 without its control cabinet but possibility to have the refrigeration unit (group year 2020, gas R449A). Machine in excellent condition and very well maintained.
Key data: 1530 mm, 4 mm
Schröder MHSU 1500/4,0 - Motorized guillotine shears - Motorized backgauge 750 mm - Hold-down device with hard rubber strip to protect polished sheet metal - Extended extendable support table - All-steel knife 2-flute - Punctures at a distance of 10 mm parallel to the lower knife over the entire course of the table - Selector switch for single and continuous stroke - Rear compartment protection according to CE via 3-beam light barrier and side protective grille -Foot switch - Year of construction 2013 Specification - Effective length: 1530 mm - Capacitance (Rm 400 N/mm²): 4.0 mm - Cutting angle: 2.7° - Stroke rate: 34 rpm - Drive power: 4.0 kW - Nominal power: 5.0 kVA - Power supply: 3x 400 V - Dimensions WxHxD: 2100 x 1410 x 2600 mm - Weight: 1250 kg
Key data: 1550 mm, 6 mm
Type HSS 1500 x 6 mm Specifications: Cutting length 1540 mm Sheet thickness in St 6 mm Projection 250 mm Back gauge up to 750 mm
Offer 23476 Specifications: - Max. working width 1020 mm - max. material thickness 3.0 mm - Cutting angle 2.7° - electr. Footswitch - Single stroke – continuous stroke can be pre-selected - Manual backgauge up to 500 mm - Front pull-out sheet metal support - Drive 400 V / 2.5 kW - Space requirement approx. W 1450 x H 1200 x D 1400 mm - Weight approx. 900 kg
Used drawing press SCHRÖDER, type: Hamax 800 incl table For machine filling of fresh or cured meat parts into artificial casings.
offer 22557 Specifications: - working width 4020 mm - material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment electronically preselectable 0 - 135 ° - largest opening width / stroke of the upper cheek 250 mm - controlled mot. Height adjustment of the bending bar 50 mm - Height adjustment of the lower wall 50 mm - Upper cheek drive 400 V / 2.2 kW - Bending cheek drive 400 V / 3 kW - with - 3 axis positioning control POS 500 - controlled backgauge 10 - 1000 mm - Space requirement with backgauge approx. W 4900 x H 1650 x D 2400 mm - Weight approx. 4500 kg
Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm
Type: NT 620 To work with boneless meat Loading width: 620 mm Product height: 130÷220 mm Steaker head: 700 steaker needles (2 х 350) El.connection: 400/440 V, 50/60 Hz El.connection value: 8,0 kW ; 17 А Machine dimension in mm: Length: approx. 2200 Width: approx. 1250 Height: approx. 2200
Schröder Curing Oven - Width: 130 cm - Depth: 160 cm - Height: 190 cm Good condition fully functional can be visited and tried on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before buying and tested under electricity. Please ask questions before purchasing to avoid ambiguity. For general questions or an appointment for a visit, I am always available at the telephone number below or above. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.
Warehouse number: 3726 SHEET METAL BENDING MACHINE Manufacturer: SCHROEDER , Type: 2500 x 2.5 mm Machine NO.: 6290, Year of construction: 1987 Specifications: Size bending length 2550 mm Size sheet thickness 2.5 mm Program-controlled backgauge. Siemens - 1000 mm Control Siemens Fabr. Touchscreen Mechanical. Accessories: Length: 2000 mm, Høhe: 1700 m0, Width: 3100 mm, Weight: 2600 kg
working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm
SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.
Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.
Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz
Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany
Type: UTK 18 200-2a-2e Power: 2 X 11 kW + 1 X 7.5 of kW, 380 V, 50 Hz Perslucht: max 20-25 bar Weight: 4,000 kg YOM 1985 Scraped surface heat exchanger for heating, temperature holding and cooling of liquid, vegetable, high viscous and crystalline products. Previous used for heating, holding (volume ± 85 ltr) and with steam cooling of food products (sauces) and ammonia (NH3, 125 ltr., 17 bar,-20 ° C / 45 ° C). 2 independent ammonia system. Constant quality of the product, continuous running and inline cleaning system (CIP).
