Key data: 300 mm, 750 mm
Year of manufacture: 1991 / 2023 revised by DEGUMA Make No.: 6552 Rollers: 750 mm roller width, 650 mm working width 300 mm diameter Cylindrical, smooth surface Working height: 1350 mm Note: on the roller bales there are several traces of indentation of screws Roll gap: 0.5 – 25 mm Rear roller speed: 2 – 26.5 min-1 Friction: switch for synchronization and fixed friction 1 : 1.82 Gap adjustment: electric gap adjustment Gap display: digital Material wiper jaws: 2-piece steel wiper jaws, foldable Surface temperature Roller: up to 220 °C Heating type: electric Heating capacity per roller: 18 kW Temperature control: electronic regulator with feedback Temperature sensor: RTD PT 100 Roller cooling: medium water, connection inlet Dmr. 12 mm, connection outlet Dmr. 22 mm, water pressure approx. 4 bar New rotary unions, without temperature contr ...
Key data: 110 mm, 350 mm
Year of Make: 1990 Make No.: 6439 Rollers: 350 mm roller width 110 mm diameter - Cylindrical, smooth surface - Height of the top of the roller to the floor: 1200 mm Roller temperature control: Electrically heated up to 300°C via electric heating rods; - Water-cooled via new spray lances and NEW rotary unions in both rollers; - Without temperature control unit Speed: Infinitely adjustable via frequency converter Adjustable roller: max. 22.5 rpm = 7.8 m/min Fixed roller: max. 27 rpm = 9.3 m/min Friction: Switchable friction ratio (friction or synchronization) - 1 : 1.2 or 1 : 1 Roller bearings: Bronze plain bearings Bearing Lubrication: Oil Circulation Lubrication Gap adjustment: Manual manual adjustment by crank - Parallel adjustment of both sides Gap Indicator: Mechanical Analog Dial Gauge Material wiper jaws: One-piece metal scrapers - Manu ...
Key data: 150 mm, 450 mm
Power supply Voltage V 380 Type of current three-phase current Frequency Hz 50 Amperage A 30 Connected load kW 18 Electrical fuse A 63 Cooling water requirement 1/min 10 Characteristics Roller diameter mm 150 Roller width mm 450 Working width mm 350 Batch volume dm³ 1 Drive Rear roller speed 1/min 20 Speed front roller 1/min 10 - 20 Friction 1 : 2 Drive torque Nm 2000 Drive power kW 8.0 Heating Surface temperature °C up to 220 Heating type: electric Heating capacity per roller kW 5.5 Total heating capacity kW 11.0 Temperature Control Electronic Controllers with recirculation Switching behavior PID Temperature Sensor Resistance Thermometer PT 100 Dimensions Machine length mm 1600 Overall length (incl. water connection) mm approx. 2000 Machine width mm 750 Machine height mm 1600 Working height mm 1200 Work surface requirements m x m ...
Key data: 200 mm, 450 mm
Rollers: 450 mm roller width 200 mm diameter Cylindrical, smooth surface Height of the top of the roller to the floor: 1340 mm Roller temperature control: water-cooled, spray lances in both chamber-drilled rollers, Without temperature control unit Speed: Infinitely adjustable via frequency converter Adjustable roller: max. 28 / 24 rpm = 17.6 / 15.1 m/min Fixed roller: max. 34 rpm = 21.3 m/min Friction: Switchable friction (switchable by lever) 1:1.2 and 1:1.4 Roller bearings: Bronze plain bearings Bearing Lubrication: Oil Circulation Lubrication Gap adjustment: Manual manual adjustment by ratchet; Separate setting for right and left side Gap Indicator: Mechanical Analog Dial Gauges Material wiper jaws: Two-piece metal wipers; not foldable • Strippers move with the adjustable roller when adjusting the roller gap and are therefore always in ...
Key data: 110 mm, 225 mm
Year of manufacture: 1963 / Control system renewed in 1985 Rollers: 225 mm bale width 110 mm diameter Cylindrical, smooth roller bales Temperature control: Chamber-drilled rollers, oil-tempered via rotary union and spray lances Speed: Infinitely adjustable Solid roller: 11 - 63 rpm = 3.8 - 21.8 m/min Adjustment roller: 11 - 63 rpm = 3.8 - 21.8 m/min Friction: Infinitely adjustable Bearing: Bronze Plain Bearing Lubrication: Electric oil circulation lubrication Gap adjustment: Manual with ratchets Material guide jaws: Two-piece with centre centreboard, non-folding Material tray: plastic tray below the rollers, can be pulled out by hand Motor: Two SEW three-phase brake motors with 2.2 kW each, 230/400 V, 50 Hz, 1395 rpm Transmission: Two PIV gearboxes (for speed control) in combination with two JAHNEL helical gearboxes Control: Conventional ...
Key data: 190 mm, 450 mm
available Lab Mill! Description attached !
Qty 1 x Schwabenthan 150mm dia x 350mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Even/friction selectable gear ratios, Motor mounted under frame. Complete with electrical controls and in good condition. O/a dimensions 2400 x 850mm.
Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm
A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible.
