Model
(Manufacturer: STAHL)
Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition
Built 1997 format max 520 x 840 mm min 100 x 150 mm Folding capacity max 180 m/min Equipment: o Flat pile feeder o Zaehlgeraet 1. Folding unit: o 4 folding bags 2nd folding unit: o 4 folding bags
Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment o flat pile feeder 1st folding unit: o 4 buckle plates o Festa foldingrolleradjustment o noise prevention ; working condition
Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min
1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min
1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min
1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min
1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min
1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min
1 factory-tested single girder overhead travelling crane lifting capacity 5000 kg Span around 10,000 mm Hook way max. 5.000 mm Make steel Year of production/workshop test 1983/2016 Crane equipped with steel monorail trolley, freely movable floor control Working speeds: Hoist 0.5/3.4 m / min Trolley gear 16.0 m / min Crane chassis 4.0/16.0 m / min
1 factory-tested, very well-preserved single-girder crane with angle trolley load approx. 4,000 kg Load trolley CA 5,000 kg Wingspan approx. 7.100 mm Make steel Year of production / workshop testing 1986/2016 Crane radio control equipped with angle trolley for a perfect hook road, Working speeds: Hoist 0.5/3.25 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 10.0/40.0 m / min
Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long
feeder: • pallet feeder • machine number (feeder) 34103/88 • counter EVZ 30 1st folding unit: • pre-slitter shafts • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • working width max. 94cm • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit • working width max. 66cm • 2 buckle plates • rear-mounted slitter shafts • noise prevention Still in operation: No Available: sofort
Size: 490 mm Equipments: 4 buckle plates 1 Knife vertical pile feeder
E-chain hoist, electric hoist, crane STAHL type Si T 201-10/2,5No.: 1202373 year of construction 1989Load capacity 250 kgHook travel = lifting height 3.5 metersLifting speed 10 m/min. Fine lifting speed 2.5 m/min.2 load strands = 250 kgCable length of operating bottle approx. 1.4 metersMains connection 400 volts, 50 Hz.- Suspension eye on the top of the craneWeight: 22 kgGood condition; used
Electric carriage, electric trolley for chain hoist, crane trolley, chassis, trolley for double T-beams STEEL type GU-A035400Fab.Nr. 0104671 year of construction 1986Load capacity approx. 1100 kgRoller diameter approx. 80 mmTrack width from 65 mm to 110 mmTravelling speed 12.5 m/minEngine power 0.42 kWNe-connection 380 Volts, 50 Hz.Weight 20 kgGood condition; used
E-chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1Fab. No. 1524132 Year of construction 1997Load capacity 2000 kgHook travel 4 metersMain lifting speed 4 m/min. Fine stroke speed 1 m/min. Load Trains 2Cable Length Operating Bottle approx. 0.9 metersNominal Power 1.6 kW / 0.36 kWNenncurrent 4.3 A / 2.5 ANetching Connection 400 Volts, 50 Hz- Suspension Eye on the Top of the Crane- Emergency StopWeight 75 kgGood Condition; used
E-chain hoist, electric hoist, crane STAHL type R 12Fabr. No. 3437532 year of construction 1979Load capacity: 1250 kgHook travel: 2.4 metersLifting speed: 8 m/min. Fine lifting speed: 2 m/min. 2 load trains = 1250 kgEngine power: 1.25 / 0.25 kWNetz connection 380 volts, 50 Hz- chassis self-made - without chain bagsGoods condition; used
CEE Load Circuit Breaker, Load Switch STEEL 25-300-574-0-S 25 A 220 - 500 V AC explosion-proof ! New ! Dimensions: 260 x 170 x 155 mm
CEE Command Transmitter, Command and Signaling Device STEEL 8030/13 2 x Push Buttons Push buttons are missing ! 1 x Indicator Light explosion-proof ! New ! Dimensions: 210 x 80 x 90 mm
CEE Command Transmitter, Command and Signaling Device STEEL 8030/13 2 x Pushbuttons 1 x Indicator Light explosion-proof ! New ! Dimensions: 210 x 80 x 90 mm
CEE Command Transmitter, Command and Signaling Device FANAL EX - AL10 ( EX-AL10 ) D011302 D011102 1 x Key Switch 1 x Pushbutton explosion-proof, aluminium housing ! New ! Dimensions: 180 x 90 x 130 mm
CEE Command Transmitter, Command and Signaling Device FANAL EX - AL10 ( EX-AL10 ) 1 x Key Switch 1 x Indicator Light explosion-proof, aluminium housing ! New ! Dimensions: 180 x 90 x 130 mm
CEE Plug, Plug Safety Plug STEEL 8575/12-506 16 A-6h 200 / 415 V 50 / 60 Hz 3P + N + PE explosion proof ! New !' Dimensions: 160 x 65 x 65 mm
Switch socket, socket STEEL 8575/11-506 16 A-6h 240/415 V explosion-proof ! New ! Dimensions: 270 x 110 x 160 mm
Electric chain hoist STEEL R 2 ( R2 ) Payload: 50 kg Lifting speed: 8 m/min Voltage 380 V used, tested ! Dimensions: 420 x 370 x 300 mm
Overhead crane with trolley, overhead crane STAHL ZL-C 125-13,60 E built: 1989 Lifting capacity: 12,500 kg Crane track average: 13,600 mm Track average cat: 1,400 mm Crane travel: 40 / 10 m/min Trolley travel: 20 / 5 m/min Stroke: 5 / 0.8 m/min hook path: approx. 5.8 m with test book and documentation ! dismantled ! used, tested ! Dimensions: mm
