We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Horizontal milling machine Steinel Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Horizontal milling machine Steinel SH1 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
380 V 16 A Collet mount, nut is missing. Length 40 cm Width 30 cm Height 50 cm Color: Gray
380V 16 A Length 0.67 m Width 0.96 m Height 1.50 m Table
380 V 16 A 63- 800 rpm Length 1 m Width 0.8 m Height 1.40 m Color: Green Machine is overhauled.
380 V 16 A Speeds 100 - 1250 rpm Length 1 m Width 0.8 m Height 1.40 m Table converted to pneumatic control.
Steinel SH4 milling machine. Good condition. With lots of accessories. The machine runs and does what it is supposed to.
Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...
Weighing fraes machine STEINEL SH5, table 700 / 200 mm, table lashing adjustment pneumatic
Stand drilling machine in row arrangement, used Gang drilling machine, used Type: BT 6.52 Manufacturer / make: Steinel Built/ new in: 1978 Drilling capacity / drilling capacity: 6 mm in St 60 Spindle cone/ spindle taper: MK 1 Drilling spindle discharge / distance center drill spindle to column: 204 mm Drilling stroke/ way of spindle: 90 mm Table clamping area/ table size: 800 x 390 mm Column diameter/ diam. of coulmn: 60 mm Drilling spindle speeds / speeds of drilling spindle: 1400 / 2800 / 5600 per min/ per minute Total connection value / rated power: 0.25 kW each => 1 kW Weight / weight: approx. 0.4 t
Two Steinel BZ20 milling machines are available. Travel X/Y/Z: 560mm/450mm/450mm, speed: 7000rpm, feed: 10000mm/min, tool holder: ISO30, tool positions: 40, rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control: Siemens System 8, weight: approx. 12000kg. Spare parts carrier.
Horizontal machining centre with 2-fold change table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 MFabr. No. 34 Year of construction 1988Travel range X: 500 mm, Y: 400 mm, Z: 320 mmClamping surface, table surface 500 x 400 mmTool holder ISO 40Spindle speed max. 6300 rpm. infinitely variableMain spindle drive 12 kWNet connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions- Changing table with 2 stations- Interface for data transfer- Coolant device with chip conveyorSpace requirement L x W x
Horizontal machining center with pallet changer STEINEL type BZ 24 FFZwith CNC control SIEMENS Sinumerik 850 MFabr. No. 77 Year of construction 1990Travel X: 630 mm, Y: 500 mm, Z: 500 mmTable size per pallet 400 x 400 mmPallet rotation B-axisSpindle speed max. 7100 rpm. infinitely variableTool holder ISO 40Power connection 380 Volt, 50 Hz, 80 Amp.- Tool changer with 60 tool positions and double-arm gripper- Pallet changer with 4 pallets- Horizontal pallet space for machining, axis movement =
Horizontal machining center with pallet changer STEINEL type BZ 24 FFZwith CNC control SIEMENS Sinumerik 850 MFabr. No. 58 Year of construction 1990Travel X: 630 mm, Y: 500 mm, Z: 500 mmTable size per pallet 400 x 400 mmPallet rotation B-axisSpindle speed max. 7100 rpm. infinitely variableTool holder ISO 40Power connection 380 Volt, 50 Hz, 80 Amp.- Tool changer with 60 tool positions and double-arm gripper- Pallet changer with 4 pallets- Horizontal pallet space for machining, axis movement =
Horizontal machining center with 2-fold changing table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Fabr. No. 34 Year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle Drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA- Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant device with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 ton. good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 ton. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg; used
x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm rotary table dia.: 270 mm rotary table tiltable: 0 - 24 ° spindle taper ISO: 30 spindle turning speed range: 31,5 - 7100 U/min feed speeds: 1 - 10.000 mm/min control: SINUMERIK System 8 no. of tools in magazin: 40 wotkpiece diameter with 2 vacant positions: 100 mm workpiece length: 255 mm weight of tools max.: 6 kg total power requirement: 32 kW weight of the machine ca.: 11,6 t dimensions of the machine ca.: m = 5 axis machining centre Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.