Key data: 42 mm, 4 mm
- Working range pipe diameter 6 – 42 mm - Wall thickness max. 4 mm - Right bending direction - 2 bending planes (radius changer) - Pipe extension length 3,100 mm - Automatic bending sequence ( bending, twisting, longitudinal ) - CNC control - Software collision program Transpro-V2K - Max. radius 250 mm - Dimensions L x W x H approx. 4,000 x 1,600 x 1,500 mm - Weight approx. 3,000 kg + control console approx. 200 kg
Baujahr/ year: 2000/ überholt/ overhauled 2020 CNC: Transfluid bending collision software T Project Professional Incl. License key Transfluid bending soaftware T Project Proffessional Anti collision with license key Pipe diameters/pipe diam.: 40 168 mm Wall thickness / wall thickness: max. 11.5 mm Bending speed / bending speed: 7°/ sec Aufzugslänge/ arbor length 6000mm Radius/radius: min. 150mm Weight: approx. 26.5 t Connected load: approx. 35 kW Specifics Set of bending tools / set of tools for: Radius 2 x D 78 – 168.3mm bending mandrels Machine was completely overhauled in 2017 and equipped with a new control system equipped. / in 2017 machine fully overhauled and new control
Inv. Num. : 5263 Type: DB 642 ST Producer: Transfluid Created: 1999 Parameters: Minimum tube diameter: 6 mm Maximum tube diameter: 42 mm Maximum bending angle: 190 h Machine height: 1150 mm Machine length: 4000 mm Machine width: 650 mm
Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .
This Transfluid DB 650 ST-SPS was manufactured in 2017. It is a robust die bending machine designed for efficient handling and bending of pipes with lengths from 200 to 500 mm and diameters up to 60 mm. It features a bending angle of up to 190° and a high bending speed of 36°/sec, suitable for both steel and stainless steel pipes. For more information about this machine, please reach out to us.
Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
bending angle max. +/-: 180 + 10 ° tube: 4100 mm - Round tube steel up to 30 x 2.2 mm ² - Round tube stainless steel up to 30 x 1.5 mm - Square tubes 20 x 2.5 mm - Bending time 90 degrees: 1.5 sec (feed) - Length feed speed: 450 mm - Radius range max 125 mm - Free-standing bending head 850 mm long - Bending axis drive electrohydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 4-28 mm total power requirement: 1,5 kW weight of the machine ca.: t dimensions of the machine ca.: m - bending type: 4-28 mm - bending angle: 190° (ohne Rohr) - bending radius: 1,5 x D – 2,0 x D - nominal pressure: 250 bar - operating pressure: 3095 mm n. re. - delivery rate: 4,5 l/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 4-28 mm bending radius min.: 1,5 x D - 2,0 x D mm Control: Siemens LOGO delivery rate: 4,5 l/min bending angle max. +/-: 190 ° nominal pressure: 250 bar operating pressure: 3095 bar delivery rate: 4,5 l/min total power requirement: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tube diameter stainless steel: bis 42 x 2,0 mm tube diameter steel: bis 42 x 3,0 mm bending angle max. +/-: 180 + 10 ° section modulus: 4,1 ccm operating pressure: 6 bar total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 6100 x 2300 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 76,1 mm tube: 4500 mm bending radius max.: 200 mm bending device: rechts weight of the machine ca.: 1,7 t Control: electronic 1-axis control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
