Key data: 65 mm
CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.
Key data: 65 mm
CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.
GENERAL Project No.: 905732 Quantity: 1 pcs. Manufacturer: TRAUB Type: TNL 18 Control: Traub TX 8i-s Year of Make: 2011 Condition: Used machine Spindle Approx (hrs): 28381 Program run approx. (hrs.): 36646 DESCRIPTION TURN Max. turning diameter 20 mm Max. speed main spindle 10000 1/min Max. power main spindle at ED 10-40/100% 3.7/2.2 kW Max. torque main spindle at ED 10-40/100% 23.5/14 Nm Spindle aperture main spindle 20 mm Axes on the main spindle unit Z/C Workpiece spindle stroke main spindle 205 mm Max. rapid traverse speed in X/Y/Z Main spindle unit -/-/40 m/min Hollow clamping cylinder on the main spindle Max. speed of sub-spindle 10000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Max. torque sub-spindle at ED 10-40/100% 23.5/14 Nm Spindle passage sub-spindle 20 mm Axes on the sub-spindle unit X/Z/C Travel in X/Y/Z sub-spindle unit 100/- ...
Key data: 395 mm, 450 mm, 4000 1/min
Control Traub TNX 8H Max. turning diameter 395 mm Max. turning length 450 mm Standard turning diameter 275 mm Circumferential diameter over face slide 395 mm Circumferential diameter over bed 520 mm Max. speed of the main spindle 4,000 rpm Drive power 11 kW Usable rod diameter 40 mm Accessories: Chip conveyor, chuck diameter 160 mm, tool cabinet Remarks: 72,000 hours engine, available at short notice by arrangement
used
Max. rod Ø: 42mm Chuck ø: 40mm Diameter over face slide: 160mm Speed range: 10-5000 rpm 12-station turret (non-driven) 12 Conveyor Bar feeder FMB turbo 3000 Max. pole length: 3m
Control Traub ... TX 8 i Turning diameter ... 680mm Turning length ... 1000mm Inclined bed Spindle bore ... 100mm powered tools ... 12/12 Axis X ... 320mm Axis Z ... 1070mm Axis C ... 0,001° Rapid traverse of the X axis... 15m/min Rapid traverse of the Z axis ... 20m/min Spindle speed ... 1-2240 rpm Max. spindle torque ... 682Nm Main engine power ... 31kW Speed of driven tools ... 1-3150 rpm Machine weight ... 6800kg L x W x H ... 5500x2300x2150mm
Traub TNC 42/65 With gantry loader ( can be dismantled ) Top maintained and immediately ready for use. For purchases made until 01.12.2024, we can grant a 10% discount.
Inv. Num. : 7973 Type: A 15 Producer: TRAUB Created: 2021 Parameters: Maximum spindle speed: 6500 1/min Spindle bore: 15 mm Length: 1300 mm Width: 1000 mm Height: 1600 mm Weight: 700 kg
Traub TNX 65/42 CNC rod lathe/ BJ 2007/ TX8i-S control/ incl. chip conveyor, coolant lubricant preparation and extraction
Key data: 26 mm, 28 mm, 225 mm
Traub System TX 8i control system Max. rod diameter 26 mm Machinable length 225 mm Travel 250 mm Max. spindle speed 8,000 rpm Sub-spindle, driven tools Machine weight / space requirement / machine height 4 t / 3.71 m x 1.3 m / 1.63 m Accessories: LNS Hydrobar loading magazine; without tool accessories Note: The hard drive needs to be replaced,
Fully functional Traub Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
Fully functional Traub lathe built in 1972 Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
CNC Swiss Automatic Lathe with Bar Feeder - Main spindle with C-axis - Holder for driven guide bush max. passage 26 mm - Sub-spindle with C-axis - Workpiece ejection device - Tool carrier at the bottom with 12 driven tool carriers - Tool carrier at the top with 12 driven tool carriers - x3 transverse axis for front apparatus/sub-spindle - Front apparatus 5-way with Z3 carriage - Tapping side processing station - Workpiece removal device - Hinged belt chip conveyor - Coolant system - Setup for deep drilling - Fire protection device for processing with cutting oil - Traub Tool Monitoring TX8i - FMB bar loading magazine
CNC Swiss lathe TNL12/7 with bar loading magazine and fire protection equipment for oil processing Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment Bar Feeder Coolant Setup Conveyor Production time: 36150 h
Attention: Axle amplifier X3 axle defective and CPU bar loader missing/defective. Production time: 34293 h Spindle runtime: 36396 h Switch-on hours: 55709 h Control Traub TX8i Structure of the machine: - Turret = 6 driven tool stations - Front apparatus = 4 driven tool stations - Residual apparatus = 3 tools driven stations Main spindle: max. 12,000 1/min Sub-spindle: max. 12,000 1/min Fire protection equipment (disabled) Bar Feeder Coolant Setup Conveyor
Article number: 22-99-015 Manufacturer: Traub Very good general condition Machine workshop tested Delivery time: Immediate prior sale reserved Year of construction: ca.1984 L x W x H: approx. 800x600x1300mm Weight: approx. 300kg Control: conventional Chamfer diameter from - to: approx. Ø 20-60mm Accessories Support bracket Other accessories on request Price and other technical data on request
TRAUB TNS 65 D / 5 - Axis CNC Lathe -COMPLETE TECHNICAL DATA see Data sheets -Control TX8 D -Built in 1994 -C - Axis -Rod passage 65mm -Hydraulic bar loading magazine -Various powered tools -Tool holder -Three-jaw chuck -Documentation
Traub TNK 36, Year of manufacture 2012, TX 8i S control, Absolute measuring system, Coolant device 7 bar, Breuning loading magazine 7m, Spindle insert tubes, Sub-spindle, Revolver 12-speed,
used
Traub TNX 65 - 42, Year of manufacture 2008, Control TX 8i - S, Bar machining up to 65 mm, 3 turrets 10 speed with Y axis, all turret stations driven, Sub-spindle, 2 x C axis 0.001°, Conveyor Cooling lubricant cleaning system, workpiece handling, without loading magazine, a lot of accessories,
- Ø over bed: 360 mm - Ø over carriage 160 mm - Max. spindle speed: 3,150 1/min - Revolver with 8 stations - Travel distance: X= 205, Z= 850 mm - Dimensions LxWxH: 3300 x 2100 x 1800 mm - Weight: 3,500 kg
Equipment of the machine: - Powered tools, used - Filter system -Conveyor - Collets, used - Control TX8i Technical data: - Main and counter spindle - 1 turret with 12 stations, all powered - Clamping diameter: 36 mm - Spindle speed 6300 rpm - Tool holder front: 5 - Tool holder back: 5 - Feed Y1 axle: 20 mm - Feed X-axis: 50 mm - Feed Z-axis: 100 mm - X3 axis - Z4 axle
CNC lathe TRAUB TNS 30 D With TX8D controller Year of construction: 1987 Spindle bore: 30 mm Circulation O over face slide: 200 mm X axis : 140 mm Z axis : 220 mm Speed range: Max. 8,000 rpm With the following accessories: Full protection cabin with interior lighting 2 x 12-speed turret VDI 30 ( 6 driven stations ) 14 driven tools VDI 30 8 tool holders VDI 30 1 pc additional control for training Coolant system 1 collet chuck hydraulic with foot switch Conveyor Operating instructions THE MACHINE IS IN TOP CONDITION THE MACHINE COMES FROM A VOCATIONAL SCHOOL
Control TX8i Max. rod diameter 65 mm Turning length 450 mm Spindle speeds 5,600 min-1 Main and counter spindle 2 x 10-speed turret with attached revolver Competition. 2 x C-axis Workpiece discharge device with conveyor belt Conveyor Coolant cleaning system HAINBUCH Tension Top LNS Short Bar Loading Magazine Quick Load Servo 3 Various tool holders (fixed and driven)
Immediately available from location : CNC lathe TRAUB Type TND 300 Built in 1991 CNC control TX 8 F Spindle bore 42 mm Circulation over bed 400 mm Circulation via flat carriage 170 Revolver 12 speed 6 powered tools Tailstock Turning length 500 mm Lining 160 mm Drive power 18 kw Spindle speeds 56 – 5600 rpm Drive driven tools 3 / 5 kw Speed driven tools 6000 rpm Conveyor Coolant system Weight 3.8 tons Dimensions: 2498/1990/2005 mm Prior sale and errors excepted. The machine is sold as it stands in the hall. The buyer can view the machine under power with connection options. Currently, it is not energized.
Key data: 360 mm, 800 mm, 5000 1/min
High Quality CNC Lathe Traub TND 360 We offer a precision CNC lathe from the renowned Traub brand. The Traub TND 360 was manufactured in 1981 and allows for efficient and accurate machining, which meets current requirements Technical details: - Diameter: 360 mm - Turning length: 800 mm - Tailstock: MT 3, hydraulically operated - Revolver: 8 stations - Power consumption: 380V, 32 kW This CNC lathe stands out for its reliability and precision, allowing versatile machining of workpieces. The machine needs an inspection due to an unknown problem in the control system. It is also in very good condition and has been regularly maintained. The price is net, free to load. The Traub TND 360 can be viewed by prior appointment. If you have any questions, just call or write. 016096679844 Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Technical specificat ...
General: Year of construction 2011 Control Traub TX 8i-s Spindle: Spindle speed max. 10,000 rpm Power 3.7 kW Rod passage 20 mm Revolver: Tool stations top 8-fold Rear apparatus 7-fold Dimensions and weight: Dimensions: 3,060 x 1,460 x 2,250 mm Weight approx. 4,000 kg Other equipment and accessories: Coolant supply 3/8 bar (tank 500 l) Workpiece discharge into parts hopper Conveyor Attachments Bar Loading Magazine High Accuracy Package Turret Smoke and mist separator company Büchel Automatic CO2 extinguishing device Bar feeder IEMCA Elite 220/32
Traub TNS 65 D / 5-axis CNC lathe / control TX 8 D FOR COMPLETE TECHNICAL DATA, SEE Data Sheets E2j9tbm -Control - Type TX 8 D -C - Axis -Rod passage approx. 65mm -Hydraulic bar feed
Curve Controlled Turret Bar Automatic Turning Machine max bar passage 26 mm max. speed 4750 rpm 6-fold star turret max. stroke of the turret slide 80 mm Coolant device Gearbox 2 Double Vertical Support 2 side supports with steel brackets - Reverse machining driven - Oil protection cover - Bar weight feed
Key data: 340 mm, 750 mm
Traub TNA 400 Y, Built in 1997, Control TX 8 H, Turning length 750 mm, Swivel Ø 340 mm, Revolver 12-speed, Conveyor Tailstock C axis, Addressed. Tools Y axis +/- 50 mm, good condition, approx. 20,000 spindle hours,
General: Year of construction 2006 Control Traub TX8i Travel X 50 mm Z 100 mm Working spindle max. 6,300 rpm Rod passage 36 mm Torque 21/32 Nm Other equipment and accessories: High-pressure system with belt filter 30 bar Conveyor Bar feeder FMB turbo 3-36-3200-C Preparation of the extraction device
