Stainless steel storage silo: 100 m3. Total measurements: Height: 14 m, width: 4.12 m.
Electrical panel with power distribution switches to machines.
Transformer with concrete shed. Prepared 430 Kvass, house measures: 7x3 m.
Drying centrifuge: 1 x 0.5 m Ø diam. Engine: 30 Kw (40 hp) at 2940 rpm.
Hydraulic hydraulic filter changer. Diameter: 220 mm. Motor: 4 Kw. With head of 43 threads (spaghetti). Hydraulic group with accumulator and electrical panel.
Grinder mill with blades Soundproofed. Cutting chamber: 650x650 mm, motor: 37 Kw (50 hp). Stepped rotor. With electrical panel and 5 spare screens.
Hydraulic shear (guillotine) 80 TN force. Measures cut width: 1.400 mm, height: 1.500 mm, motor: 60 hp. With electrical panel.
Vertical mixing silo. Approximate capacity 56 m3, dimensions Ø3.590x8.370 mm of total height. Made of steel S-235 and built in sheet thickness 3 mm with perimeter rings of reinforcement UPN-80, support structure by means of 4 pillars HEA180 mm braced with HEA-120 profiles, inner thread of Ø300 mm, step 200 mm with shaft tube of 114.3x6.02 mm placed in tube-jacket of Ø 355x4,78 mm, registration on the side for visit and inspection and in the lower tube for emptying in case of jamming or breakdown, equipped with safety system, 4 inspection sights, two upper ventilation vents, maximum level indicator FILSA type MS-1, transmission by pulleys and belts with 22 kW motor at 1,000 rpm with safety protections, discharge pipe 200x200 mm connected to inner screw jacket of mixer with manual closure at the outlet mouth, Nozzle at the bottom of cone for complete emptying of machine, cat ladder with ...
Ripper 2 axes, Cutting chamber: 620x840 mm, 2 motors: 9.2 KW each. Electrical panel, hopper and foot. Newly revised with new bearings and all new blades and counter-blades (combs).
Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.
4-axis bullet breaker: 1.77 x 1.37, with 2 gearmotors: 5.5 kw, electric panel with automata and variable speed drive with automatic reversal. Feed hopper measurements: 2.35 x 1.75. Optional: On hopper of 1 m more removable height.
Worm Diameter: 300 mm, length: 5000 mm, discharge mouth: 320x320 mm, motor: 3 Kw
Full 16 mm dropper inserting machine, with winder, vibrator, dropper dispenser and double end winder.
Silo mixer: 7500 litres, motor: 11 Kw (15 hp). With pelican mouth and electrical panel.
Conveyor belt Length: 5.80 m, width: 0.65 m. Geared motor: 0.55 kw. Cold air tunnel and air cooling equipment with 2 compressors and radiators.
Vacuum cleaner for transporting solids. Motor: 15 Kw, diameter: 700 mm, width: 250 mm. Inlet tube: 200 mm, outlet tube: 200 mm.
Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.
Drying centrifuge: 1.2 m at 3000 rpm. Leg motor: 25 hp at 3,000 rpm.
Mixer silo: 9000 liters. Pelican mouth. Dryer with resistance group.
Silo mixer: 10000 litres, motor: 11 kW (15 hp), electrical panel. Size: 2,20 x 2 x 5,75 height.
Washing pond: 4 x 1.5 meters, stainless steel. Sludge extraction augers.
