straightener. Decoiler Max. passage width - 300 mm Material thickness - 0.4-10 mm Straightening rollers -9 pcs Feed rollers - 2 pcs Coil outer diameter. 1200 mm Inside - clamping range - 420-520 mm Coil weight - 1200 kg max. processing. Cross section - 800 mm2 Dimensions - 800 x 1600 x 1600 mm, Btto 1200 kg
bandwidth 90 mm, masses 0.8 x 0.8 x 2.2 m , Btto 320 kg/ pcs
Tech. Data VS 4 maximum strip width 250 mm, maximum advance length 400 mm Max band thickness 2.5 mm maximum band cross-section 600 mm2 Holding power sled pliers - up to 1,6 t Holding force holding pliers - up to 1 t Thrust - up 0.4 t Damping - hydraulic Feed accuracy +-0.01 mm (distance) Tech. Data VS 3 Max. Band width 160 mm maximum advance length 230 mm Max. Band thickness 2.5 mm, max. band cross-section 400 mm2 Holding force slide clamp up to 900 kg Holding pliers up to 600 kg, feed capacity 240 kg complete with instructions, control, cam
Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min
material width:300 mm coil weight:0,5 t coil internal diameter:420 - 520 mm coil external diameter:1400 mm weight:0,6 t dimensions (WxDxH):0,8 x 1,2 x 1,7 m expansion:pneumatic
Two Wenzke rewinders are available. 1) Wenzke PM 1000/DC-S (heavy version), max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1995. 2) Wenzke PMS 500, max. outside diameter: 2800mm, inside diameter: 800mm, winding width: 700mm, max. pipe diameter: 75mm PE, year of manufacture: 1988. Documentation partially available. On-site inspection is possible. Individual sale possible.
material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m
Press force: 1000kN, rapid traverse force: 100kN, retraction force: 100kN, overrun time: 0.053s, power: 18.5kW, table dimensions X/Y: approx. 1000mm/800mm, clearance: 600mm, max. stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. Stroke without tool: 420mm, external control: Provit, machine dimensions X/Y/Z: approx. 1800mm/2200mm/3700mm, control panel dimensions X/Y/Z: approx. 800mm/800mm/1600mm, external control cabinet dimensions: approx. 1600mm/500mm/1200mm. Without feed unit. On-site inspection is possible.
Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible.
coil weight: 2 x 0,15 t clamping range: 265 - 485 mm band width: 200 mm Thickness of sanding paper: 0,1 - 4 mm total power requirement: 0,25 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 0300 mm coil weight: 0,400 t coil internal dia.: 280 - 580 mm coil outside - diam. ca.: 1200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Driven by electric motor Restriction discs at the front and rear Loop control via sensor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
coil weight: 2 x 0,15 t clamping range: 265 - 485 mm band width: 200 mm Thickness of sanding paper: 0,1 - 4 mm total power requirement: 0,25 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 1,2 x 0,9 x 1,2 m - motorized double-turn coiler - newly painted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
