For sale is: 1 Piece Used Hydraulic Press Brake Manufacturer: Weinbrenner Type: GP100 Year: 2000 Pressing force: 1,000kN Working length: 2,050mm Clear stand width: 1.550mm Stroke: 600mm Control: Cybelec Hours: 35,000 Incl. rich tools, see contents 2 pieces of white cabinets. Several folders of documentation available for the machine, Elt plans, control Cybelec,... Very neat condition. The machine can be viewed in our warehouse in 09599 Freiberg.
Sell a press on behalf of the factory, which was fully functional until the plant was shut down. Pressing force 250 tons Length 3050mm Sheet thickness max 15mm A lot of accessories Dimensions transport approx. 3,2m 2m 3,5m high 20to Removal must be organized by the buyer. Crane rental nearby, it can be helped supportively.
Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration machine in mint cond ...
Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h
Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg
Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.
Pressing force: 110t, working length: 3000mm, stand distance: 2500mm, throat depth: 250mm, stroke: 100mm, installation height: 350mm, table height: 900mm, table width: 200mm, power: 11kW, weight: approx. 8500kg, operating hours: 89610h. On-site inspection is possible.
CNC Press Brake WEINBRENNER Type AP 80 / 2600Fabr. No. 758 A Year of manufacture 1979Machine without function - control problemsPressure capacity 80 ton. Working length 2600 mmPassage between the uprights 1600 mmProjection 250 mmTable height above floor 830 mmDistance table - ram 480 mmRam stroke 150 mmWorking speed approx. 11 mm/sExpress lowering speed approx. 80 mm/sReturn speed approx. 160 mm/sMotor power 7.5 kWNet connection 400 Volt, 50 Hz, 25 Amp.- CNC control
Capacity: 1250 t Folding length: 4100 mm Make Weinbrenner Type AP 1250 Year 1976 Heavy duty pressbrake Capacity (metric tons)Force = 1250 T Folding length (mm)L = 4.100 Down stroke or Up stroke 2 x 30 kW Tandem type Die height = 1.000 Throat = 450 mm Speed = 45 / 6 / 50 mm Between column = 3.050
pressure: 160 t chamfer lenght: 3550 mm stroke: 300 mm weight: 15400 kg dimensions: 4600x2600x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2550 mm plate thickness: 3,5 mm weight of the machine ca.: 3000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 t chamfer lenght: 3100 mm distance between columns: 2250 mm stroke: 250 mm dimension of ram: 3100 x 60 mm ram adjustment: 110 mm desk sze: 3100 x 150 mm : 250 mm voltage: 380 V current: 380 A weight of the machine ca.: 10000 kg dimensions of the machine ca.: 3100 x 1500 x 2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 200 mm dimension of ram: 3050 x 25 mm table surface area: 3050 x 85 x 900 mm : 250 mm weight of the machine ca.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 110 t chamfer lenght: 3500 mm weight of the machine ca.: 10600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4100 mm plate thickness: 20 mm distance between columns: 4100 mm Control: total power requirement: 45 kW weight of the machine ca.: 37900 t dimensions of the machine ca.: 4,9x2,6x2,8 m Rear sheet holding-up device Figure 26 in brochure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 250 t chamfer lenght: mm throat: mm stroke of ram: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 300 mm weight: 14000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 1250 t Folding length: 4100 mm Make Weinbrenner Type AP 1250 Year 1976 Heavy duty pressbrake Capacity (metric tons)Force = 1250 T Folding length (mm)L = 4.100 Down stroke or Up stroke 2 x 30 kW Tandem type Die height = 1.000 Throat = 450 mm Speed = 45 / 6 / 50 mm Between column = 3.050
