Price: -
New in: -
Manufacturer:
Model:
Type of machine:
item-No.::
Seller-item-No.:
Auctions:
used or new:
Radius search:
presses
date: 06.10.2026
approved
dealer
item-No.: 162753336
New in: 2023 new
approved TOP SELLER
Location: pl
Price: 39.900 €

Display press only - 159h Year of manufacture: 2023 Controls: Delem Da-66T with touch screen Pressing force: 36 t Bending Length: 1300mm Stroke: 150 mm Travel speed: 150 mm/s Working speed: 10 mm/s Return speed: 150 mm/s Installed power: 21 kW Power Supply: 400V/50Hz/3~ Tool clamp pressure: 50 bar Dimensions (L × W × H): 2050 × 2050 × 2310 mm Weight: 4350 kg

sheet metal working / CNC Hydraulic Plate Shear
date: 03.07.2023
item-No.: 12778822
New in: 1987 used
Location: de

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

sheet metal working / Hydraulic Shear
date: 03.07.2023
item-No.: 12778739
New in: 1981 used
Location: de

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

sheet metal working
date: 23.06.2025
item-No.: 162710709
New in: 1970 used
Location: de

Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.

presses
date: 23.06.2025
item-No.: 162710742
New in: 1979 used
Location: de

Pressing force: 110t, working length: 3000mm, stand distance: 2500mm, throat depth: 250mm, stroke: 100mm, installation height: 350mm, table height: 900mm, table width: 200mm, power: 11kW, weight: approx. 8500kg, operating hours: 89610h. On-site inspection is possible.

date: 24.05.2025
item-No.: 162711376
New in: 1979 used
Price: 3.000 €

CNC Press Brake WEINBRENNER Type AP 80 / 2600Fabr. No. 758 A Year of manufacture 1979Machine without function - control problemsPressure capacity 80 ton. Working length 2600 mmPassage between the uprights 1600 mmProjection 250 mmTable height above floor 830 mmDistance table - ram 480 mmRam stroke 150 mmWorking speed approx. 11 mm/sExpress lowering speed approx. 80 mm/sReturn speed approx. 160 mm/sMotor power 7.5 kWNet connection 400 Volt, 50 Hz, 25 Amp.- CNC control

sheet metal working
date: 23.06.2025
item-No.: 162721956
used
Location: nl

Capacity: 1250 t Folding length: 4100 mm Make Weinbrenner Type AP 1250 Year 1976 Heavy duty pressbrake Capacity (metric tons)Force = 1250 T Folding length (mm)L = 4.100 Down stroke or Up stroke 2 x 30 kW Tandem type Die height = 1.000 Throat = 450 mm Speed = 45 / 6 / 50 mm Between column = 3.050  

presses / Bending Presses
date: 23.06.2025
item-No.: 162732382
New in: 1997 used

pressure: 160 t chamfer lenght: 3550 mm stroke: 300 mm weight: 15400 kg dimensions: 4600x2600x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / CNC Hydraulic Plate Shear
date: 26.08.2024
item-No.: 162697648
New in: 1971 used

sheet width: 2550 mm plate thickness: 3,5 mm weight of the machine ca.: 3000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
date: 26.08.2024
item-No.: 162697650
New in: 1972 used

pressure: 110 t chamfer lenght: 3100 mm distance between columns: 2250 mm stroke: 250 mm dimension of ram: 3100 x 60 mm ram adjustment: 110 mm desk sze: 3100 x 150 mm : 250 mm voltage: 380 V current: 380 A weight of the machine ca.: 10000 kg dimensions of the machine ca.: 3100 x 1500 x 2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
date: 26.08.2024
item-No.: 162697653
New in: 1992 used

pressure: 125 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke: 200 mm dimension of ram: 3050 x 25 mm table surface area: 3050 x 85 x 900 mm : 250 mm weight of the machine ca.: 11000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
date: 26.08.2024
item-No.: 162697661
New in: 1980 used

pressure: 110 t chamfer lenght: 3500 mm weight of the machine ca.: 10600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working / Hydraulic Shear
date: 23.04.2024
item-No.: 162684537
New in: 1987 used

sheet width: 4100 mm plate thickness: 20 mm distance between columns: 4100 mm Control: total power requirement: 45 kW weight of the machine ca.: 37900 t dimensions of the machine ca.: 4,9x2,6x2,8 m Rear sheet holding-up device Figure 26 in brochure The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
date: 23.04.2024
item-No.: 162685641
New in: 1978 used

pressure: 250 t chamfer lenght: mm throat: mm stroke of ram: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
date: 02.11.2023
item-No.: 162682125
New in: 1992 used
Location: de

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

presses / Bending Presses
date: 02.11.2023
item-No.: 162682126
New in: 2003 used
Location: de

pressure: 160 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 300 mm weight: 14000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet metal working
date: 30.08.2023
item-No.: 158219137
used
Location: nl

Capacity: 1250 t Folding length: 4100 mm Make Weinbrenner Type AP 1250 Year 1976 Heavy duty pressbrake Capacity (metric tons)Force = 1250 T Folding length (mm)L = 4.100 Down stroke or Up stroke 2 x 30 kW Tandem type Die height = 1.000 Throat = 450 mm Speed = 45 / 6 / 50 mm Between column = 3.050  

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)