- Table size: 260 x 290 mm - Spindle holder: drill chuck - Coolant device: yes - Total power: 0.55 kW - Machine weight: 380 kg - Space requirements (W x D x H): 0.8 x 0.7 x 1.8 m Details well-maintained machine immediately ready for use Accessories Various guide cartridges, incline: 1 x 0.4, 1 x 0.45, 2 x 0.5, 2 x 0.7, 2 x 0.8, 2 x 1.0, 1 x 1.25
This in-line drill consists of three drilling units, a BG 16 drill head which is also suitable for thread cutting and two B13S drill heads. Drilling depth is 120 mm and the drilling table is height-adjustable. Name: In-line drill Manufacturer: Wörner Type: BG16 / B13S Material: Normal steel Drive motor: 1 x 0.9 kW and 2 x 0.75 kW Dimensions: L 1300 mm x W 800 mm x H 1800 mm Empty weight: approx. 800 kg Speed: 95 - 600 rpm Condition: Used Tech. Documentation: No Accessories: 3 drill heads, drilling depth 120 mm, drilling table height adjustable Price: On request
Wörner series drilling machine 4 units in circular arc alignment Built in 1958 MK2 spindle - speed change by Keilreinemscheibenwechsel Shaped casting table - drilling units height adjustable max wide table/spindle: approx. 500 mm - and rotatable with clamp. Drilling units throat depth: 280 mm Coolant system on each drilling unit; 1 x Unit TIBO 13 with Albrecht Chuck 0-13 mm left/right rotation Stroke: 0-100 mm with drill depth - fine adjustment screw Rpm: 560-3500 RPM motor 0.55 kw 50 Hz 380V 3 x units UNIVA 16 MK 2 recording left/right rotation speed: 540-3600 RPM (gear reduction speed unit is missing) Engine power: 0.55 kw 50 Hz 380V -of which a unit of UNIVA with automatic speed switching for tapping saturation (return 1.5 fold) speed: 350-2300 RPM (gear reduction speed unit is missing) Engine power: 0.4/0,35 kw 50 Hz 380 v 900/14540 U/min Stroke: 0-100 mm wit ...
with FESTO rotary table 360 mm numbers of drilling units: 29433, 29616. 29617, 29797 and 29798
Central lubrication, lubrication pump with tank WOERNER B-100 375.820-6A 12 bar tank capacity approx. 90 l engine: 0.37 kW 220 - 240 / 380 -420 V used, tested ! Dimensions: 810 x 650 x 750 mm
Lubrication pump WOERNER PFZ-M 1,65/4/P 1.16/P V: 1,65 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm
Lubrication pump WOERNER PFZ-M 1,25/5/P 1.13/P V: 1,25 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm
Lubrication pump WOERNER PFZ-A/0.12 New ! Dimensions: 130 x 120 x 100 mm
Level gauge for central lubrication WOERNER KFI-E/B/W/W/300/230 IP65 New ! Dimensions: 420 x 90 x 90 mm
Volume Flow Limiter WOERNER DUK-A/0/1,8 New ! Dimensions: 125 x 55 x 50 mm
Volume Flow Limiter WOERNER DUK-A/2,5/0 New ! Dimensions: 125 x 55 x 50 mm
Lubrication pump WOERNER PFZ-A/0.12 New ! Dimensions: 130 x 120 x 100 mm
Lubrication pump WOERNER PFZ-M 1,25/5/P 1.13/P V: 1,25 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm
Lubrication pump WOERNER PFZ-M 1,65/4/P 1.16/P V: 1,65 cm3/U pmax: 210 bar New ! Dimensions: 190 x 190 x 160 mm
Central lubrication, lubrication pump with tank WOERNER B-100 375.820-6A 12 bar tank capacity approx. 90 l Engine: 0.37 kW 220 - 240 / 380 -420 V used, tested ! Dimensions: 810 x 650 x 750 mm
Volumetric flow limiter WOERNER DUK-A/2,5/0 unused! Dimensions: 125 x 55 x 50 mm
Volumetric flow limiter WOERNER DUK-A/0/1,8 unused! Dimensions: 125 x 55 x 50 mm
Central lubrication level gauge WOERNER KFI-E/B/W/W/300/230 IP65 New ! Dimensions: 420 x 90 x 90 mm
Drilling capacity: 0 mm Number of drilling units: 0 Spindle taper: 0 CNC Brand: 0 CNC Model: 0 Technical data Number of drill-heads: 4 Drill capacity: 4 mm Drill depth (spindle stroke): 50 mm Table length: 900 mm Table width: 160 mm Taper in spindle Depth of throat: 130 mm Spindle speeds: number (steps): 8 from: 650 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 200 kg Various accessories: Drill chuck: 4
