Manufacturer ZAYER Model KPU-4000 AR Year 11/2000 CNC HEIDENHAIN TNC-430 PA Table Table surface 4,000 x 1800 mm Permissible weight on table 20,000 kg Routes and advances Longitudinal travel (X-axis) 3,700 mm Cross Span (Y-Axis) 3,050 + 873 mm Vertical travel (Z-axis) 1,100 mm Pitch between uprights 2,300 mm Maximum height from table to nose with direct exit head 1,175 mm Maximum height from table to nose head 45º in vertical position 1,240 mm. Fast forward axes (X, Y, Z) 25,000 mm/min Maximum working feed 15,000 mm/min X, Y, Z axis acceleration 0.8 m/sec2 Automatic head 45º Axis Rotation A 0.001º/360.000 positions B-axis rotation 0.001º/360.000 positions Automatic head cone 45º ISO-50 – DIN 69871 Automatic head speed 45º 6,000 r.p.m. Main motor power 37 kW. No. of speed ranges 2 Direct output head INCLUDED Direct output head cone ISO-50 – DIN 69871 ...
Key data: 6000 mm, 2000 mm, 3000 mm
Machine Type: CNC Travelling Column Milling Machine Make ZAYER Type KCU6000 Year of construction 1992 Control type Heidenhain TNC 415 X-way (mm) 6,000 Y-off (mm) 2,000 Z-off (mm) 3,000 Speeds from (rpm) 20 - 1,800 Tool holder BT50 Feed longitudinal (mm/rev) 5 - 5000 mm/min Feed Transverse (mm/U) 5- 5000 mm/min. Vertical feed rate (mm/rev) 5- 5000 mm/min. Rapid traverse 10,000 mm/min. Total power(KW) 34 Length (mm) 11,000 Width (mm) 2,500 Height (mm) 7,000 Weight 31.000 kg Information 'Juaristi MG6' rotary table: 1500 x 1200 mm With coolant pump Cooling system: 2.5 bar Tool cooling: 15 bar
Manufacturer ZAYER Model 30 KF-3000 AR Year 2000 CNC HEIDENHAIN TNC-430 Table Table surface 3,000 x 1,000 mm. Allowable weight on table 10,000 kg. Routes and advances Strokes (X/Y/Z) 2,708/1,250/1,513 mm. Fast Feed / Working 25,000/20,000 mm/min Head Head cone. ISO 50 Speed range 35 – 6,000 rpm Automatic Swivel Head 0.001º/0.001º No. of Header Ranges 2 Head power 37 kW Other Machine Weight 28,000 kg. Total installed power 88.18 kVA
Year 2000 CNC SIEMENS 840 D Longitudinal Length (X-Axis) 22,000 mm Transverse Course (Y-Axis) 1,500 mm Vertical Stroke (Z-Axis) 3,000 mm Stoller Table 6000 X 2000 X 300 mm 2 Units/ 2 Units Fast Forward X-Axis 10,000 mm/min Fast Feed Y-Axis – Z 15,000 mm/min Maximum Working Advance 5,000 mm/min ISO 50 Head Cone DIN 69871 AD 50 Speed Range 6,000 r.p.m. Universal Head 45º Automatic Rotation Head 360,000 Pos. Elbow 360,000 Pos. Main Motor Power 37 Kw. No. of Speed Ranges 2 Ranges/ Automatic Tool Loader INCLUDED No. of Tools in Automatic Loader 30 Tools Cooling Through Tool 20 Bar INCLUDED Coolant Tank with Paper Filtering System INCLUDED ZF Head Cooling System + Enclosure INCLUDED Longitudinal Chip Evacuator INCLUDED Autonomous platform for Operator with Safety lock and Vertical Displacement of 2000 mm. INCLUDED Preparation for the installation of a broken transfer ...
Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...
Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)
Manufacturer ZAYER Model TEBAS-5000 Year 2013 CNC HEIDENHAIN iTNC-530 HSCI Table Table Surface 5.200 x 2.200 mm. Max. weight allowed on table 25.000 kg. Max distance from 45º head nose to table in vertical position 1.410 mm. Max distance from 45º head nose to table in horizontal position 1.465 mm. Max distance from direct exit head nose to table in vertical position 1.420 mm. Travels and feeds Longitudinal Traverse (X Axis) 5.000 mm. Transversal Traverse (Y Axis) 3.750 mm. Vertical Traverse (Z Axis) 1.250 mm. Distance between columns 3.000 mm. Rapid Traverse 50.000 mm/min Max. Working Feed 30.000 mm/min Headstocks Universal Auto Indexing Head 45º 0.001º/0.001º Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 Spindle speed 6.000 rpm Speed ranges 3 Main spindle power 43 kW Direct output head reduction 1-2,29 INCLUDED Taper DIN 69871 AD 50 Spud ISO 7388-2 B 50 S ...
Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table Surface 4.700 x 1.200 mm. Travels (X/Y/Z) 3.400/1.250/2.000 mm. Quill Travel (W Axis) 500 mm. Taper ISO-50 Main Motor Power 37 kW Automatic Head 45º INCLUDED Automatic Head 45º 0.001º/0.001º Head 45º Max. Speed 3.000 rpm 45º Head Taper ISO-50 Twist Head Contiuous INCLUDED Twist Head Max Speed 3.000 rpm Twist Head Taper ISO-50 Ram with Quill INCLUDED Quill Diameter 150 mm. Quill Taper ISO-50 Internal and External Coolant Head 45º and Quill INCLUDED External Coolant Twist Head INCLUDED Semi-automatic head change INCLUDED Automatic Tool Changer INCLUDED Positions in ATC 60 Pick up station AITEK for 45º and Twist Heads INCLUDED Chip Conveyor INCLUDED Portable Handwheel HEIDENHAIN HR-410 Piece Touchprobe RENISHAW MP 16+SP2/1 Machine Weight 35.000 kg.
Year 2000 CNC SIEMENS 840 D Longitudinal Traverse ( X Axis) 22.000 mm Cross Traverse (Y Axis) 1.500 mm Vertical Traverse (Z Axis) 3.000 mm Stoller Table 6000 X 2000 X 300 mm 2 Unid/ 2 Units Rapid Traverse X Axis 10.000 mm/min Rapid Traverse Y – Z Axis 15.000 mm/min Maximum Working Feed 5.000 mm/min Taper ISO 50 DIN 69871 AD 50 Turning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /INCLUDED Coolant System in Electrical Cabinet INCLUDED Machine Weight 68.000 Kg. Mach ...
Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition
Fixed bed milling machine Zayer 2000BF. Table: 2500x700mm. Longitudinal travel: 2000mm. Cross travel: 1000mm. Vertical travel: 1000mm. ISO50. Speeds: 18. (28-1800rpm). Power: 15cv. Weight: 13000Kgs. Equipped with DRO Fagor.
Universal milling machine with automatic movement ram. Table: 1700x700. Longitudinal travel: 1320mm. Cross travel: 1016mm. Vertical travel: 560mm. ISO50. 18 speeds (28-1800rpm) 18,75 Hp. Weight: 6200Kg.
A CNC traveling column bed milling machine (lateral milling machine) Zayer is available. Travel X/Y/Z: 10000mm/1500mm/3000mm, rapid traverse X/Y/Z: 10m/15m/10m/min, spindle power: 37kW, tool holder: SK50/DIN2080, feed and spindle motors: Indramat, power consumption: 64.1kVA. Machine dimensions X/Y: approx. 18m/6.5m, weight: approx. 40t, control: Heidenhain TNC 415B, operating hours: approx. 61975h, spindle hours: approx. 41500h. Expected to be available from August 2025. Documentation available. On-site inspection is possible.
Travel X/Y/Z: 1700mm/800mm/800mm, table dimensions X/Y: 2000mm/630mm, tool holder: ISO50, max. table load: 6000kg, feed: 5m/min, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 5200mm/2800mm/2950mm, weight: approx. 12000kg, control: Heidenhain TNC-630, documentation available. On-site inspection is possible.
This 3-axis Zayer 30KF3000 CNC milling machine was manufactured in 1997. It offers robust and precise milling capabilities, ideal for a variety of machining tasks. If you are looking to get high-quality milling capabilities, consider the Zayer 30KF3000 machine we have for sale. Contact us for more information.
This 3-axis Zayer 30KF 3000 vertical machining center was manufactured in 1997. It offers robust construction and precision for complex machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information.
CNC milling machine Type: KFU 3000 Manufacturer: Zayer Year: 1990 Control: Heidenhain TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Spindle speed: 3000 rpm X axis: 2700 mm Y axis: 1000 mm Z axis: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Toolholders cca 40 pieces Cube 2 pieces Chip conveyor Machine in good condition, under power Find more here - / Contact us at -
Table length: 3000 mm Table width: 1000 mm Longitudinal X: 2709 mm Cross Y: 1212 mm Vertical Z: 1501 mm Positions ATC: 40 CNC Brand: Heidenhain CNC Model: TNC 426 Make Zayer KFU 3 Type 20 KFU 3000 Year 1995 Zayer KFU with TNC 426 bedmiller bedfreesmachine Table length (mm) L = 3.000 Table width (mm)W = 1.000 Longitudinal X (mm)X = 2.709 Cross Y (mm)Y = 1.212 Vertical Z (mm)Z = 1.501 CNC Heidenhain TNC 426 Iso 50 / 1800 / 22 kWATC Chain 40 positionsNC Hor. / Vert 2 Positions
x-travel: 4000 mm y-travel: 800 mm z-travel: 800 mm control: HEIDENHAIN TNC355 table-size: 4000x8000 mm T-slots: 6x mm turning speed range: 30-1800 U/min feed: 5-5000 mm/min rapid traverse: 15000 mm/min spindle taper: SK 50 weight of the machine ca.: 15 t With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table length: 3000 mm Table width: 1000 mm Longitudinal X: 2709 mm Cross Y: 1212 mm Vertical Z: 1501 mm Positions ATC: 40 CNC Brand: Heidenhain CNC Model: TNC 426 Make Zayer KFU 3 Type 20 KFU 3000 Year 1995 Zayer KFU with TNC 426 bedmiller bedfreesmachine Table length (mm) L = 3.000 Table width (mm)W = 1.000 Longitudinal X (mm)X = 2.709 Cross Y (mm)Y = 1.212 Vertical Z (mm)Z = 1.501 CNC Heidenhain TNC 426 Iso 50 / 1800 / 22 kWATC Chain 40 positionsNC Hor. / Vert 2 Positions
x-travel: 3.400 mm y-travel: 1.250 mm z-travel: 2.000 mm Control: TNC-430PA table-size: 4.700 X 1.200 mm V- travel: 500 tool taper: ISO 50 milling head -swivable: 0.001º/0.001º Grad main drive: 37 kW Chip coveyor: inkl handwheel: HR-410 Tools changer: 60 pos. milling head: Automatic Head 45º weight of the machine ca.: 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 12000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 415 taper ISO: 50 P.D.B. spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 800 mm z-travel: 5000 mm control: Siemens tool adaptor: ISO 50 number of spindle speeds: 285-3000 voltage: 380 V total power requirement: 36 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions 2x workpiece holders with (2x) hydraulic support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 4700 mm y-travel: 1000 mm z-travel: 1000 mm control: HEIDENHAIN TNC355 table-size: 5000x1000 mm T-slots: 7x mm turning speed range: 2800 U/min feed: 6-5000 mm/min rapid traverse: 15000 mm/min spindle motor: 30,00 kW spindle taper: SK 50 Table load: 10.000 kg Main drive: 40 PS weight of the machine ca.: 27,00 t dimensions of the machine ca.: m With HEIDENHAIN TNC 355 control. Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
